Dimension and Installation Instruction for etrailer.com Round A-Frame 2K Trailer Jack # TJA-2000S-B

Question:

Hello, I am interested in purchasing part number TJA-2000S-B, but I need to verify some dimensions beforehand. Can you get me a drawing of this part .sldprt, AutoCAD, DXF, PDF, JPG, as well as some general installation instructions? Thanks,

asked by: Tyler N

Expert Reply:

All A-Frame mounted jacks like etrailer # TJA-2000S-B will use the same 3-inch mounting hole bolt pattern. This means, the mounting holes are a universal size and pattern so that any A-Frame jack will fit into any A-Frame jack mount as long as your trailer has an A-Frame trailer mount.

It's important to note that you will want to make sure and replace your current A-Frame jack with a jack of similar specifications with a lift capacity the same or higher.

I have attached the above mentioned product to this page as well as a dimensional image for your convenience.

expert reply by: Jackie C

click to enlarge

Albert C.

5/18/2020

I have a 1966 Aladdin 15' trailer with an Atwood A frame hitch....my jack stripped out and my tongue is threaded at 3-1/2" center, not 3 or 3.25..........are the slots for mounting long enough to allow for a 3.5" on center spread triangle for my three bolts? Thank you for the help, looking forward to the fix!

Chris R.

5/21/2020

The mounting slots on the Round A-Frame Jack # TJA-2000S-B will probably get you close to lining up with the mounting holes on your trailer - but I'm not sure they'll buy you an extra 1/2". We don't have any jacks that feature that large of a pattern, so your only opotion may be to simply drill out new holes.