Dutton-Lainson Removable Wheel for A-Frame Trailer Jacks Installation Video

There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options:…

Bulldog A-frame jacks like the #BD155033 are made overseas, but there are some Made in the USA options available. If you're looking for an American made A-Frame trailer jack, the A-Frame Trailer Jack - Topwind - 2,000 lbs. by Dutton-Lainson…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

From the bottom of the mounting bracket of the Buyers Products jack part #3370091260 down to the bottom of the retracted inner tube without the foot is 8 inches. The retracted distance from the bottom of the mounting bracket to the bottom of the jack…

The Replacement Foot for etrailer or Ram Electric Jacks #EJ-3520-FT has an inner diameter of about 1-1/2" and its outer diameter is 1-3/4" which is the measurement you'll need if you are looking for a replacement. This foot is designed…

I called my contact at K-Source about the K-Source Universal Dual Lens Towing Mirrors part #KS3990 and they informed me that they have not really heard of many issues with excessive vibration. However, if you are experiencing such then you might want…

Yes, the dimensions of the Stretch Net for Yakima SkinnyWarrior #Y07018 that you referenced is 55 inch by 21 inch unstretched. It would easily stretch to 80 inch by 20 inch like you need.

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…

We do offer a 5K static/3K lift capacity bolt on jack that would be easily removed. Take a look at the Traler Valet #TV64FR. The jack will fit on frame members up to 4-3/4 inches tall x 3-3/4 inches wide. The jack can be swiveled up so its parallel…

A trailer jack only needs to support the tongue weight, which for a boat trailer is something like 5 to maybe 10 percent of the weight of your loaded trailer, because so much of the weight is at the rear of the trailer. To be absolutely sure you will…

The mounting plate for the Trailer Valet JXS Trailer Jack #TV64FR has bolt holes that are separated on center 5-1/2" horizontally. The vertical mounting holes are separated on center 1" each for a total of 5" from the top hole to the…

The Trailer Valet #TV64FR JXS 5K trailer jack is a pipe mount swivel jack that can be removed from the trailer by pulling the pin shown in the provided photo. If you click the provided link, you can see a video showing a typical installation.