Hidden Hitch Ball Mounts - Fixed Ball Mount - 80232 Review Video

The Torflex Lift Kit item #K71-707-01 is the correct kit for a #10 Dexter torsion axle and you won't need to drill any new holes into the spacers. I have attached a couple of pictures below so you can see how they look once installed. I have also…

The Torflex lift kit part #K71-723-01 is the only size lift we have that fits this axle configuration. There isn't a 2-5/8 inch lift available that is similar to it.

We can help you out here, and first, thanks so much for the photo it was super helpful. And based on that I can tell you that your tandem axle trailer with #10 Torflex axles is absolutely compatible with the Dexter lift kit: - Torflex Lift Kit -…

The long ball mounts like the part #C45230 have around 11-1/8 inches from the center of the hitch pin hole to the center of the ball hole whereas the extra long ball mounts like the #D-26 have around 12-1/2 inches from the pin hole to the ball hole.…

I wasn't able to obtain this information from the manufacturer so I went out to our warehouse and measured the Ark Locking Jerry Can Holder with Siphon Guard part #JCHF20D for you. The height of the mounting bracket is 10-3/4" which you can…

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

You can raise your trailer about 2 more inches using the Correct Track Trailer Alignment and 2" Lift Kit - Single Axle #LC87120. Then you can also add longer hangers if you prefer. We do have long hangers like #115919 which are the longest…

We offer two Torflex axle lift kits for Dexter's torsion axles. All you need to check is the axle weight rating, which will appear either on the axle's own identification sticker or on the trailer's main information plate where axle…

For single Torflex axle trailers like what your Lance has we have 2 different lift kits, part #K71-723-01 for #9 Torflex axles and part #K71-707-01 for #10 Torflex axles. From what I could find on your 2015 Lance 1575 it looks like you have a #10…

Since we know your Dexter Torflex axle is a 2,400 lb axle that would mean that it's a number 10 and the lift kit part #K71-707-01 would be what you'd need. The brake assemblies part #23-47-48 would also be the correct parts as well.

Thanks for the photos! Based on that you do not have 3 inch high-profile brackets on your #10 Dexter Torflex axles, so yes, you can absolutely use the Dexter lift kit on your 2019 Taxa Mantis: - Torflex Lift Kit - Single Axle - 2-5/8" Lift…

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…