Is Torflex Lift Kit K71-723-01 Only Lift Kit Size that Fits This Axle

Question

Question:

This seems to be the correct kit for my 1995 Jayco 1207… I was wondering if this was the only lift size available 2-5/8” or is there another option like a 4” kit for the same axle?

asked by: Richard R

0

Expert Reply:

The Torflex lift kit part # K71-723-01 is the only size lift we have that fits this axle configuration. There isn't a 2-5/8 inch lift available that is similar to it.

expert reply by: Jameson C

0

Answer 1

The Torflex Lift Kit item #K71-707-01 is the correct kit for a #10 Dexter torsion axle and you won't need to drill any new holes into the spacers. I have attached a couple of pictures below so you can see how they look once installed. I have also…

view full answer...

Answer 2

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

view full answer...

Answer 3

Since we know your Dexter Torflex axle is a 2,400 lb axle that would mean that it's a number 10 and the lift kit part #K71-707-01 would be what you'd need. The brake assemblies part #23-47-48 would also be the correct parts as well.

view full answer...

Answer 4

We offer two Torflex axle lift kits for Dexter's torsion axles. All you need to check is the axle weight rating, which will appear either on the axle's own identification sticker or on the trailer's main information plate where axle…

view full answer...

Answer 5

Since you have a Dexter Torflex 3,000 lb trailer axle the correct lift kit is the part #K71-707-01 that you have. The other part number you mentioned is for lighter capacity axles.

view full answer...

Answer 6

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

view full answer...

Answer 7

I attached a picture that shows the dimensions of the Dexter lift kits #K71-723-01.

view full answer...

Answer 8

My contact at Dexter confirmed that the Torflex Lift Kit #K71-723-01 will work for your 1,500 lb #9 Torflex axle. That being said, based on your serial number 122265412, I was able to confirm you have a top mounted axle. So in order to install the…

view full answer...

Answer 9

That does appear to be a Dexter #9 Torflex axle. For the #9 you can use lift kit #K71-723-01!

view full answer...

Answer 10

The bolts in the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01, which fits #9 Torflex axles with a 2,000-lb capacity are 1/2"-13 Screw Hex Cap Bolts which are 1-1/4" long. I have added a link to a video review of this kit…

view full answer...

Answer 11

When you lift a trailer you potentially change the suspension geometry which might affect handling characteristics. So based on that it sounds like Lance would want to void the warranty of the camper. It would be like installing a lift kit on a truck…

view full answer...

Answer 12

The Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01 is compatible with No. 10 Torflex axles with 2,300 to 4,000 lb capacities. The Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 is for No. 9 Torflex axles with a 2,000 lb…

view full answer...

Is Torflex Lift Kit K71-723-01 Only Lift Kit Size that Fits This Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching