Dexter Axle Trailer Axles K71-707-01 Review Video

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

Actually the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 will not fit your 1993 Jayco 1206 KB pop-up camper. This lift kit has a weight capacity of 2000 lbs., I checked online and found that your Jayco has a 2440 GVWR. The correct…

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

The Torflex Lift Kit item #K71-707-01 is the correct kit for a #10 Dexter torsion axle and you won't need to drill any new holes into the spacers. I have attached a couple of pictures below so you can see how they look once installed. I have also…

The Torflex lift kit part #K71-723-01 is the only size lift we have that fits this axle configuration. There isn't a 2-5/8 inch lift available that is similar to it.

According to my research, the Forest River Rockwood A214HW Camper has Dexter Torflex Torsion Axles. I looked up the weight capacity of the axle and saw it was 2,300 lbs which means the Torflex Lift Kit part #K71-707-01 should be what you need. This…

We can help you out here, and first, thanks so much for the photo it was super helpful. And based on that I can tell you that your tandem axle trailer with #10 Torflex axles is absolutely compatible with the Dexter lift kit: - Torflex Lift Kit -…

In order to choose the correct Torflex Lift Kit for your 2015 Retro Riverside Trailer, you will need to determine the type of axle that it has. We have a couple of single axle lift kits currently available from Torflex. If you have a #9 Torflex axle…

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part #K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part #LC382741 for square shaped axles or part #LC270682 for diamond shaped axles as Forest…

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…