Lift Kit for 2018 Lance 1575 Camper  

The Torflex lift kit part #K71-723-01 is the only size lift we have that fits this axle configuration. There isn't a 2-5/8 inch lift available that is similar to it.

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

Since we know your Dexter Torflex axle is a 2,400 lb axle that would mean that it's a number 10 and the lift kit part #K71-707-01 would be what you'd need. The brake assemblies part #23-47-48 would also be the correct parts as well.

We offer two Torflex axle lift kits for Dexter's torsion axles. All you need to check is the axle weight rating, which will appear either on the axle's own identification sticker or on the trailer's main information plate where axle…

Since you have a Dexter Torflex 3,000 lb trailer axle the correct lift kit is the part #K71-707-01 that you have. The other part number you mentioned is for lighter capacity axles.

Thanks for the photos! Based on that you do not have 3 inch high-profile brackets on your #10 Dexter Torflex axles, so yes, you can absolutely use the Dexter lift kit on your 2019 Taxa Mantis: - Torflex Lift Kit - Single Axle - 2-5/8" Lift…

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…