Review of Gen-Y Hitch Hitch Adapters - Hitch Extender - GY89SR Video

Yes, there is. It is the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches item #GY89SR which is actually 14" long. This fits a 2" receiver, has a 500 lbs tongue weight, and a 10,000 lbs maximum towing capacity. This…

The highest-rated trailer hitch extender is from Gen-Y and is rated for 10,000 lbs towing/500 lbs tongue weight: - Gen-Y Hitch Hitch Extender for 2" Trailer Hitches #GY89SR Please note that all hitch extenders, including the #GY89SR, will reduce…

I do have a potential solution for you, but I do not have an extender that will measure exactly 12". At least nothing that will be rated for use while flat towing. I do have a 14" hitch extender from Gen-Y part #GY89SR. This is…

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

The Gen-Y Hitch Hitch Extender #GY89SR is far superior to the Curt Hitch Extender #C45795. The Gen-Y is made in the USA, comes with a lifetime warranty and as you pointed out has the higher 10,000lb trailer capacity with up to 500lbs of tongue…

I have a solution for you- the Blue Ox Hitch Extender for Tow Bars #BX88264 which has a 1000-lb tongue weight / 10000-lb towing weight capacity and will also provide a 12" extension for your hitch. This is the only hitch extender we currently…

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

Yes, the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches part #GY89SR as with any hitch extender reduces both tongue weight and gross trailer weight by half. The weight capacity with this hitch extender is 500 lbs for tongue weight and 10,000…

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

The Curt Ball Mount part #C45270 that you referenced is a hollow shank accessory. It may seem counterintuitive but hollow shank accessories are actually stronger than solid ones and would be considerably lighter. This ball mount has a 7,500 lb…