Review of Fulton Trailer Jack - Side Frame Mount Jack - FXP10W0301 Video

For your Shelby 5856A boat trailer, I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12" Lift - 1,500 lbs #FXPD15L. This jack has zinc plating for corrosion resistance and durable poly wheels. For the single…

The 205/75-R15 tires are only 1" larger in overall diameter when compared to the 205/75-D14 tires you have now so you should not have any issues replacing these with this size. The R stands for radial and the D stands for Bias. The radial ply is…

Many of the brackets for trailer jacks are designed for specific size trailer frames. That would be the first place I would start. Just measure the frame where you want to mount the jack and then go from there. We have several jacks that have various…

The height of this bracket when the jack is fully retracted is 13-inches; when fully extended the bracket height is 23-inches. The difference between these two measurements reflects the jacks 10-inches of lift range. The mounting bracket plate on…

The only trailer jack we can recommend that would fit on the same frame mount as your 2012 Ranger trailer that has a Dutton Lainson jack currently is another DL jack like with the part #DL24MR since all of the jack manufacturers use slightly…

Trailer light kit #TL16RK mounts on the heads of the 4 bolts that came with the kit. There are slots on the backs of the lights and the lights will slide onto the bolt heads. There are actually 3 slots per light giving you some adjustability. The…

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

You are correct that all bolt-on trailer jacks require a square or rectangular frame member for installation. There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to…

The Replacement Coupler Pin Kit for Titan/UFP Brake Actuators part #TK71-764-00 is 3" long x 1/4" diameter. I spoke with Dexter to confirm this for you.

Thanks for the picture of your trailer jack! Based on that all you need is the part #FXP100W0301 which will easily attach to the welded on bracket you have on your trailer frame.

Yes, the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK that you referenced can easily still work on your trailer that has the tires only 3 inches apart. The 3 inch distance you have now is pretty common for tandem axle trailers…