etrailer Round Swivel Marine Jack with Wheel Review MJ-1500B Video

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires…

There will not be much difference in ride smoothness between a fully-inflated 35-psi rated tire and a fully-inflated 90-psi rated tire, but typically a radial will give a slightly smoother ride than a bias ply tire since it has a more flexible…

We don't carry the 2x2 inch square axle in that length. We carry the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which is the comparable round axle which will work just fine. You simply will…

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and…

Some jacks do have wheel casters that can replace the foot plate like what you are looking for but there isn't a universal solution that works on all jacks. Instead you'd have to get me the jack brand and model (if you can) and I can see if…

The Race Ramps Wheel Chock for Vehicle Service part #RR-WC-2 will fit on the main platform of the Race Ramps Heavy-Duty XT Ramps for Service and Display - 67" Long part #RR-XT-2-HD although it may hang off just a bit depending on the size of the…

There is a hole under where the handle inserts into the etrailer jack part #MJ-1206B which is where you'd spray lithium grease into to lubricate the screw and assembly.

Yes, the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK that you referenced can easily still work on your trailer that has the tires only 3 inches apart. The 3 inch distance you have now is pretty common for tandem axle trailers…

For your 2.5 inch wide and 2 inch high trailer tongue, the Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,500 lbs #MJ-1500B is my recommendation. It will work very well with the trailer tongue you have and will…

The travel of the Swivel Marine Trailer Jack with Caster Wheel part #DL67MR is 10" per the technical drawing from Dutton-Lainson which I have attached below.

Based on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301. You will need to confirm that this jack will be compatible by measuring the…

We have a few wheel locks that will work for you. The etrailer Trailer Wheel Lock #288-02020 that works for tires up to 10 1/2" wide. Another option is the CLUB Tire Claw XL #WI491 that is designed to fit tires up to 12" wide.