Fulton Camper Jack - Stabilizer Jack - FSJ1-SJ2 Review Video

We have the perfect solution for you. I'd recommend using the Fulton weld-on drop leg stabilizer jack, part #FSJ1-SJ2. The jack is sold individually, but using two of them would provide 6000 lbs of support which would be plenty, as your…

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise…

I have just what you need. You can absolutely use 235/85R16 tires in place of your current tire sizes. They will be a hair wider, but not enough to make a difference. Diameter-wise they will be almost identical. In fact, I was in a similar…

For a pair of rear stabilizer jacks that you can weld directly to the frame of your 2020 Griffin 7 ton dump trailer, I recommend two of the etrailer Square Direct Weld Jack part #TJD-8000S. It measures 25-1/8 inches from the bottom of the foot to top…

The distance from where the Buyers Products Tank Holder part #337TH9934 mounts to where the tank holder portion is measures 2.82 inches.

As you can see by the accompanying photos, the Stallion Stabilizer Jacks #288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650…

The Ark Drop Down Corner RV Stabilizer Jacks #AR34FR are designed to be welded on, so this is the only way we can recommend installing them. With the included mounts there really is not enough room between the stabilizer itself and the mounting plate…

I do have a recommendation for you as we do not carry the PJ-01 stabilizers. Instead you might consider replacing your stabilizers with the much stronger Ark Drop Down Corner RV Stabilizer Jacks #AR34FR. This will include 2 jacks which are much more…

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

The folded length of the Stallion Stabilizer Jacks #288-01892-2 that you referenced is 15-1/4 inches.

The fully extended height of the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR is 24". The fully retracted height is 16".

For stabilizer jacks on your StarCraft travel trailer a great option is the Scissor Stabilizer Jacks #TJSCHD-24. These have a 5,000 lb capacity which is more than enough for your trailer, and have a max extended height of 23-3/4", so you do want…