TorkLift Camper and RVs GlowGuide Handrail Review and Installation Video

The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8004 referenced in your question is a 4-step assembly with a step platform dimension of 22 inches wide and 8 inches deep. The mounting base measures 27-7/16 inches wide and 12 inches…

The Lend-a-Hand Extra Large Folding Grab Handle #AM-533 does not have a specific weight capacity. According to Stromberg Carlson, this is only to assist and not weight bearing. Typically this is installed by driving the screws into a stud so it will…

Thanks for the photos and like you said, they are the Atwood jacks 86065, which are discontinued jacks. What that means is the best option we can offer are new, manual camper jacks, the Brophy Cable Camper Jacks. Based on my research, your 2014 Lance…

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

If you're having trouble getting access into the bumper when installing the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 you'll simply need to drill an access hole large enough to fit the bolts through and then you can use a…

We do have the #UF48-979071 which is slightly larger than the Atwood part #AT85385. The Atwood has an opening of .53 inches whereas the Ultra Fab is .66 inch. See attached picture.

The TorkLift GlowGuide Handrail for Campers and RVs with GlowStep Scissor Steps #TLA7621 that you referenced can be used on 6 step GlowSteps so it would work great for your setup.

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

I spoke to TorkLift about the issue you're having with the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 and they informed me to inform you to tighten the hinge tension on the side that's sagging. I have attached for you below…

The bracket on the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 has holes spaced 9-3/4" apart horizontally and 2-1/2" vertically. The bolt holes are 3/8" in diameter.

Depending on where you wanted to mount the Aluminum Scissor Steps, #AS03, you would use the included mounting bracket, which you can see in the fourth picture on the product page. Click on it to enlarge the picture. The bracket attaches to your…

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…