Review of Ark Camper Jack - Stabilizer Jack - AR94FR Video

The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center.…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm…

Yes, the Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are definitely an upgrade over standard trailer stabilizers. The drop down feature makes it a lot quicker to get the jacks up and tucked out of the way so they don't catch when the…

The Ark Drop Down Corner RV Stabilizer Jacks - 2-1/2' Long Corner Steadies - Qty 2 #AR94FR you were looking at would do a great job of keeping your 2021 Rockwood Roo 21SSl steady, and offer a much larger foot than a standard scissor jack so…

You certainly can install two pairs of the Ark Drop Down Corner RV Stabilizer Jacks #ARK77FR on your trailer. In that case we recommend adding one jack to each corner of the trailer frame. Keep in mind that these are designed to stabilize, not lift…

While we don't carry that exact part number we do have a replacement hub/drum that would work just as well with the part #AKHD-655-6-EZ-K. This is a 6k hub/drum that fits the spindles of the Timbren Axle Less Kit part #ASR1THDS03.

The Ark Drop Down Corner RV Stabilizer Jacks #AR94FR does include the mounting plate which is loosely installed on the jack. This plate has a flat surface area which is 4.6" long x 1.83" wide. It would typically be welded directly to the…

Since they are a weld-on only installation, there is not a torque rating for the Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies #AR94FR. And in regard to a specific weight rating, we have asked the manufacturer, Ark, this…

There isn't a guide to tell us how large the round vent is in your 2021 Nucamp T@B 400 so I'll first need you to measure the cutout hole diameter so that we can confirm a proper fitment. For example, the MaxxFan Dome Roof Vent w/ 12V Fan…

I had the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR measured and the distance from the center of the crank bolt to the top of the mounting flange is 2-1/2".

The Ark Drop Down Corner RV Stabilizer Jacks - 33" #ARK77FR is the same as their part number: XODDS850BUS.