Can The Ark Drop Down Corner RV Stabilizer Jacks Be Bolted On?

Question

Question:

can this be bolted on or only welded?

asked by: Rich

0

Expert Reply:

The Ark Drop Down Corner RV Stabilizer Jacks # AR34FR are designed to be welded on, so this is the only way we can recommend installing them. With the included mounts there really is not enough room between the stabilizer itself and the mounting plate to add any additional hardware. So, bolting them on is really not possible.

If you need a drop leg that can be bolted on, take a look at the Stallion Stabilizer Jacks # 288-01892-2 which are designed to be bolted on.

expert reply by: Jesse M

0

Answer 1

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

view full answer...

Answer 2

I had the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR measured and the distance from the center of the crank bolt to the top of the mounting flange is 2-1/2".

view full answer...

Answer 3

It sounds like what you're actually asking is whether or not the leg can be folded up in both directions. The answer is- yes. The Ark Drop Down Corner RV Stabilizer #AR34FR will allow you to fold the legs up in both directions for 180 degrees of…

view full answer...

Answer 4

For your step ladder mounting, I recommend the Stromberg Carlson Lawn Chair Rack for RVs - 4 Chair - Ladder Mount #LA-104. This will hold up to 50 lbs and can be mounted to your RV ladder. It includes the locking mechanism as well as the integrated…

view full answer...

Answer 5

The folded length of the Stallion Stabilizer Jacks #288-01892-2 that you referenced is 15-1/4 inches.

view full answer...

Answer 6

The fully extended height of the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR is 24". The fully retracted height is 16".

view full answer...

Answer 7

As you can see by the accompanying photos, the Stallion Stabilizer Jacks #288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650…

view full answer...

Answer 8

I do have a recommendation for you as we do not carry the PJ-01 stabilizers. Instead you might consider replacing your stabilizers with the much stronger Ark Drop Down Corner RV Stabilizer Jacks #AR34FR. This will include 2 jacks which are much more…

view full answer...

Answer 9

The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center. I've…

view full answer...

Answer 10

For stabilizer jacks on your StarCraft travel trailer a great option is the Scissor Stabilizer Jacks #TJSCHD-24. These have a 5,000 lb capacity which is more than enough for your trailer, and have a max extended height of 23-3/4", so you do want…

view full answer...

Answer 11

Quality-wise there isn't much of a difference between the etrailer.com stabilizer jacks part #TJ01RT-HD and the Stallion Stabilizer Jacks #288-01892-2 that you also mentioned. I'd recommend going with the kit that matches the height…

view full answer...

Answer 12

The Ark Drop Down Corner RV Stabilizer Jacks #AR34FR that you referenced installs by having the top of the bracket weld to the bottom of the RV frame.

view full answer...

Can The Ark Drop Down Corner RV Stabilizer Jacks Be Bolted On?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching