Folded Up Length of Stallion Stabilizer Jacks # 288-01892-2

Question

Question:

When the Stallion Stabilizer Jacks - 7inch Leg Travel - 22-1/4inch is folded up in the travel position what is the entire length of the stabilizer jack from far edge of mounting plate to foot? Thank you

asked by: Mark V

0

Expert Reply:

The folded length of the Stallion Stabilizer Jacks # 288-01892-2 that you referenced is 15-1/4 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

As you can see by the accompanying photos, the Stallion Stabilizer Jacks #288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650…

view full answer...

Answer 2

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

view full answer...

Answer 3

The fully extended height of the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR is 24". The fully retracted height is 16".

view full answer...

Answer 4

I do have a recommendation for you as we do not carry the PJ-01 stabilizers. Instead you might consider replacing your stabilizers with the much stronger Ark Drop Down Corner RV Stabilizer Jacks #AR34FR. This will include 2 jacks which are much more…

view full answer...

Answer 5

For stabilizer jacks on your StarCraft travel trailer a great option is the Scissor Stabilizer Jacks #TJSCHD-24. These have a 5,000 lb capacity which is more than enough for your trailer, and have a max extended height of 23-3/4", so you do want…

view full answer...

Answer 6

The Ark Drop Down Corner RV Stabilizer Jacks #AR34FR are designed to be welded on, so this is the only way we can recommend installing them. With the included mounts there really is not enough room between the stabilizer itself and the mounting plate…

view full answer...

Answer 7

The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center. I've…

view full answer...

Answer 8

Quality-wise there isn't much of a difference between the etrailer.com stabilizer jacks part #TJ01RT-HD and the Stallion Stabilizer Jacks #288-01892-2 that you also mentioned. I'd recommend going with the kit that matches the height…

view full answer...

Answer 9

The Ark Drop Down Corner RV Stabilizer Jacks #AR34FR that you referenced installs by having the top of the bracket weld to the bottom of the RV frame.

view full answer...

Answer 10

I went to take some measurements for you and found the leg of the Square Drop Leg Stabilizer Jack #SJ-R208 measured 1-1/4" outside to outside of the leg itself and 1-1/2" for the mounting bracket. The tube portion of the MaxxTow…

view full answer...

Answer 11

If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks #288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds…

view full answer...

Answer 12

The Ark Drop Down Corner RV Stabilizer Jacks #AR94FR does include the mounting plate which is loosely installed on the jack. This plate has a flat surface area which is 4.6" long x 1.83" wide. It would typically be welded directly to the…

view full answer...

Folded Up Length of Stallion Stabilizer Jacks # 288-01892-2

Product Page this Question was Asked From

Continue Researching