CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 9" - Qty 1
(63 reviews)
Price: $17.00
In Stock
CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 9" - Qty 1
Item # CE10000G
Retail:$21.83
Our Price: $17.00
You Save: 22%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (63)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE10000G
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 3-1/2 Inch Long
- Galvanized Steel
- 1-3/8 Inch Wide
- 2 Inch Wide
- CE Smith
This rust-resistant assembly helps support 1 bunk board on your boat trailer. Swivel bracket enables board to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surface keeps bracket from sliding along trailer frame.
Features:
- Bolster-and-swivel bracket assembly lets you mount a bunk board on your boat trailer
- Stabilizes one end of the bunk board - additional bracket assembly (sold separately) required for opposite end of board
- Dimpled bolster bracket surface helps prevent the bracket from sliding along the trailer frame
- Mounting slots permit as much as 3-3/4" of height adjustment during installation
- Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately)
- Strong swivel bracket lets you tilt the bunk board
- Helps you to fit the boat hull snugly onto trailer during the loading process
- Hardware is included for attaching the swivel bracket to the bolster bracket
- 11-Gauge, galvanized steel resists rust and corrosion
- Suitable for saltwater exposure
- Made in the USA
Specs:
- Quantity: 1 bracket assembly
- Overall height: 9"
- Dimensions of bolster bracket: 8" tall x 2-1/2" wide
- Mounting slot dimensions: 2-3/4" long x 1/2" wide
- Spacing between mounting slots: 1/2"
- Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall
- Flange mounting hole diameters: 3/8"
- Flange mounting hole spacing: 2-1/2" apart on center
Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers. They allow a mounted bunk board, which is run from the front of the trailer to the back, to pivot while you are loading a boat. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
10000G C. E. Smith 11-Gauge Galvanized Steel Replacement Bolster and Swivel Brackets - 9" Tall
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 9" - Qty 1 - CE10000G
Average Customer Rating: 4.9 out of 5 stars (63 Customer Reviews)
This rust-resistant assembly helps support 1 bunk board on your boat trailer. Swivel bracket enables board to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surface keeps bracket from sliding along trailer frame.by: Crouchman209/21/2013
I'm new to boating & trailers, am just a do-it-yourselfer, and found etrailer online. The trailer I am refurbishing for my son, was built in 1974. The main bunks were supported by angle cut 2"x4"s bolted to the trailer frame. They did not swivel, were not adjustable. I replaced these with the CE Smith bolster and swivel bracket assemblies. These arrived very quickly, and were perfect for my application. They are easy to install, just two 1/2" diameter carriage bolts with cut washers & lock washers per bracket assembly, and you're done. These can be adjusted for final set up to cradle your boat. They're very sturdy, and galvanized for corrosion resistance.
Now, I did also replace the original bunks, using 8' pressure treated 2x6"s, that I covered with outdoor/deck carpeting, stapling the carpet to the boards underneath. My mistake, which the picture shows, was putting carpet on one bunk before the holes were drilled & the mounting 1/2" carriage bolts were installed. Rather than removing the carpet & starting over, I just cut the carpet & folded it back where the mounting bolts would go. Once the bolts were in, I just glued the carpet back down with waterproof contact cement. I also chose to put the bunks loosely onto the top of the mounting brackets, after bolting them to the trailer. I used a mechanic's creeper to roll underneath and triple check then mark the drill holes on the bunks, to assure a good alignment for drilling the mounting bolt holes on the bunks, before finally drilling for & mounting the bunk bolts. This worked great, the bunk mounted perfectly to the brackets. The brackets do come with locking nuts on the swivel part, that needs to be tightened down into the final position, to allow the swivel without too much wiggle.
Great product, etrailer/ customer service is the best!
by: Kevin03/21/2024
Good prices. Quality products, fairly short lead times.
by: Kevin10/06/2022
Very difficult to find this piece and it works great. I needed to order another set and it was so easy to do so on their site. It was amazingly easy to find my old order and just purchase another set. Smoothest site on the Internet for that! I built my own jet ski dock with these pieces.
by: Reagan K.07/26/2013
I received my bunk board swivel brackets faster than I expected. The quality is very good and should hold up for many years of use. I haven't installed them yet but as I go through this boat/trailer restoration I expect to order more products from etrailer. Fast and easy, that's what I like!
by: Paul 09/12/2023
Just what I needed, nice quality.
by: tom09/14/2016
great products, i have bought these brackets and a couple of hitch's that came with all the hardware, amazing. the plug and play wiring harnesses are unbeatable also. i manage a repair shop and would recommend these great products without hesitation. this is the only site i could find a complete assortment of bearings for trailers without being hit over the head with a shovel at checkout...........thanks.
by: Richard04/04/2019
I ordered a set of Dutton-Lainson roller bunks, a CE Smith roller and a pair of Fulton Boat Guides to update an older boat trailer. etrailer was selected because the prices were lower than other outlets. Items were shipped and delivered quickly. I'm sure they will do the job, but won't be able to say for sure until the job is complete and I get to the boat ramp.
by: Steven C.07/02/2019
I can’t say enough about etrailer speed of shipping and quality of parts they supply.
Placed order at 3:30 in the afternoon then received email from etrailer at 6:pm that my oder was ready for shipping.
Order arrived on time and all parts fit and worked as described. Due to etrailer’s quality service I was able to repair my boat trailer in time for a Florida keys vac planned for the following day. .
Thank you etrailer staff!
Steve C.
by: Joseph 12/12/2021
It was what I needed
Joseph
12/13/2022
Fine
by: M Lucas05/05/2015
Just what I needed to convert my roller trailer to a bunk trailer. The rollers were too small and concentrated too much of the boat weight on a small area.
by: Donald04/05/2022
Everything is working like they should. The brackets came with everything needed and installation was a breeze.
by: ED H.02/09/2017
Just received my order but haven't had time to install anything yet. Bought a different boat and rebuilding the trailer. Have had nothing but good service from etrailer. Quick service and quality products will not be shopping for these type of parts any place else. Couldn't be happier with service received.
by: Todd12/23/2017
Sturdy with a good galvanized coating. Its holding up well in our coastal environment.
by: Russell03/25/2021
Great products just wish the shipping end would of kept the box in better condition. Appreciate all the customer service I’ve received and will be using the company soon for another trailer!
by: Sandra V08/26/2014
The trailer parts were perfect . They arrived when expected and fit perfectly on the new boat trailer!
by: Robert L.02/03/2016
I purchased 4 of these to attach to my boat lift. I'm using them to retrofit the lift to accommodate a PWC instead of a larger boat that I sold. They were shipped timely and arrived within 5 days of my order date. The materials are as depicted on the vendors web site. They are rugged pieces of metal that are professionally made. They will work perfectly for my application.
by: Kerry 06/10/2021
Great products & staff customer service...I do think you could improve on delivery time...Ten days is a bit too long on shipping
Kerry
6/11/2022
Great Quality Product
by: John H 02/15/2017
Yes the Brackets are great holding up quite well
by: Buddy G.01/27/2017
Received parts far quicker than I was expecting. The worked great and fit just like the old ones. Will use etrailer.com again.
by: James04/16/2018
Well great price love this company. Thanks agin etrailers
by: john s10/17/2014
seem to be a good replacement. dimensional diagrams would be useful in the future.
by: john / theresa08/31/2018
your products are always top of the line as well as the best prices anywhere. you seem to get the product shipped faster than anyone ! also any questions asked are answard in ample time and to the fullist, thanks.
by: Peter J09/19/2020
Exactly what I ordered. Fast shipping, great prices, nice people to deal with. My go to place for all our trailer needs.
25
63
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Recommended Replacement Bunk Brackets for Escort Bunk TrailerI have a solution for you, but we don't have any of the bunk brackets that are exactly the same as the ones you're replacing. Instead, you can use the CE Smith # CE10000G you were looking at to replace the bunk brackets on your current trailer. These are swiveling brackets, so the angle of the bunk boards will be able to be adjusted to match your current setup. In order to mount these bunk brackets you'll want to use U-Bolts like the CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16"...
view full answer...
- CE Smith Bolster and Swivel Bracket Assembly that Fits 1988 Landau TrailerYes, based on the picture you sent in the CE Smith Bolster and Swivel Bracket Assembly # CE10000G that you referenced will fit and work well on your 1988 Landau Trailer.
view full answer...
- Replacement Trailer Bunk Brackets for a Escort Boat TrailerThe CE Smith Bolster and Swivel Bracket Assembly # CE10000G that you referenced would work well to replace the bunk brackets on your boat trailer. You would be able to set the angle for the bunks that you would like with the # CE10000G also. I attached a picture that shows that you can use different angles.
view full answer...
- Converting Wood Bunks of Trailer to Roller BunksReplacing your wood bunks with roller bunks can be as easy as just bolting the roller brackets to the wood bunks like with the Dutton Lainson kit part # DL21741 or you can remove the brackets and bunks you have now so that you can install the brackets like the part # CE10000G that you referenced and then install the rollers.
view full answer... - Is There a Weight Capacity for the CE Smith Bolster and Swivel Bracket # CE10000GI spoke to my contact at CE Smith and he informed me that they do not specify a weight rating for the CE Smith Bolster and Swivel Bracket # CE10000G because it does not bear the weight of the boat. It is actually the U-bolt that attaches this product to the cross member of your trailer that supports the weight. He said that as long as you use a # CE10000G on every cross member you should have no problem carrying the weight of your boat.
view full answer... - Will the CE Smith Bolster and Swivel Bracket Assembly Work if Attached to Boat Trailer FrameThe # CE10000G CE Smith Bolster and Swivel Bracket Assembly is designed to mount on the boat trailer's crossmembers. You are correct in thinking that mounting this to the boat trailer frame would not provide swivel adjustment as intended since the swivel would rotate in the wrong direction. The exception to this is with kayak trailer frames. The brackets are mounted to the trailer's frame on a kayak trailer to support bunk boards that run across the trailer. I have attached a review...
view full answer...
- Bunk Board Supports and Replacement Bunk Boards for a Escort Boat TrailerThanks for the pictures! Yes, the CE Smith Bolster and Swivel Bracket Assembly item # CE10000G would offer your bunk boards support and be a great upgrade to your Escort boat trailer. You can replace your current bunk boards with the 6 foot long CE Smith Carpeted Bunk Boards for Boat Trailers item # CE27840. Another option is to remove your current bunk boards and keep your galvanized steel supports and rails and just attach new bunk boards.
view full answer...
- Recommended Replacement Bunk Brackets for a Escort Boat TrailerThe 9" CE Smith Bolster and Swivel Bracket Assembly item # CE10000G you were looking at, are our go to for replacement bunk brackets. We have had quite a few customers over the years use these on Escort boat trailers. These are sold individually or in four packs item # CE10000G-4. The swiveling brackets will allow you to mount your bunks at any angle. We also offer 11" tall brackets item # CE10001G for a single or item # CE10001G-4 for a four pack. If you don't have holes to mount...
view full answer... - How Many Bolster And Swivel Brackets Are Needed For A Boat TrailerI spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, like part # CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the boat. There should be a bracket attached to each cross member of the trailer frame. If you are buying several brackets, I would recommend part # CE10000G-4. This is a set of 4 of the 9 inch adjustable brackets. If you need longer adjustable...
view full answer... - Will CE Smith Swivel Bunk Brackets Replace Rusted Ones on Calkins Tandem TrailerThe CE Smith Bolster and Swivel Bracket part # CE10000G that you referenced certainly could replace the rusted out brackets on your trailer. This product is designed for doing what you are looking for so it would work well. I attached a review video for this product for you to check out as well.
view full answer... - Swivel Bracket Availability for Roller Bunks to Allow Matching of Roller Bunk Angle to Hull AngleThe swivel bracket part # CE10000G is exactly what you are looking for. The top of the bracket can swivel to either side to allow the roller bunks to be angled to match your hull. For a 5 foot long roller bunk we have the part # DL21741 which would be a great option.
view full answer... - Will CE Smith Bolster Brackets Handle Weight of BoatYes, the CE Smith Bolster and Swivel Bracket Assembly # CE10000G will accommodate the weight of your boat. The only thing you will need to install them are U-bolts such as part # CE15283GA-2.
view full answer... - Boat Trailer Wobble Rollers for 1 Inch Diameter ShaftJudging by the diameter of the shaft the roller fits on, I'm assuming you're needing a wobble roller. We offer two different wobble rollers that will fit a 1 inch shaft, part # YR530R-8P which is black rubber, and is 5 inches in diameter and # YR500YW-8P which is TPR (thermo plasticized rubber) and is also 5 inches in diameter. You'll also need the retaining clip, part # CE10981. We sell the rollers individually, not in packs with multiple pieces. You can see product demonstration videos...
view full answer... - Bunk Brackets That Attach to the Trailer Frame Instead of Cross MembersI do have an option for you but we do not carry the style bracket pictured in the photo. The CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel part # CE10000G can be attached to the frame with U-bolts instead of the cross members and their swivel features allows you to tilt the bunk board.
view full answer...
- Weight Capacity And Parts Needed For Modifying Boat Trailer For 26 Ft Regal CommodoreI spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, part # CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the boat. There should be a bracket attached to each cross member of the trailer frame. If you are buying several brackets, I would recommend part # CE10000G-4. This is a set of 4 of the 9 inch adjustable brackets. If you need longer adjustable brackets...
view full answer... - Three Inch Long U-Bolts to Use with CE Smith Bolster and Swivel Bracket Assembly for Boat TrailersCE Smith u-bolt # CE15254A is 3 inches long by 4-1/8 inches wide with 7/16 inch diameter. It also includes matching washers and nuts. This u-bolt is sold in quantities of 1. We also have CE Smith u-bolt # CE15252A. It is also 3 inches long but more narrow at 3-1/8 inches wide, and also has a 7/16 inch diameter. It does include washers and nuts and is sold in quantities of 1. These u-bolts are zinc-plated for corrosion resistance.
view full answer... - Replacement Bunk Brackets Solution for 1995 ESCO TrailerWe do not have any bunk brackets that attach to frame channels that run front to back. We only have options that run from left to right. Best solution we have would be to attach your bunks to the left to right crossmembers using our bolster brackets like the part # CE10000G that you referenced. If that is not possible for some reason send me a picture of your trailer frame and I'll see what we can come up with as best solution.
view full answer...
- Replacement Bunk Brackets for Escort Boat TrailerThe CE Smith Bolster and Swivel Bracket Assembly part # CE10000G are universal so they can be used in place of pretty much any bunk bracket. If you have angled bunk brackets these would not be an issue because the above bunk brackets can swivel. If you can give me the dimensions of your frame I can then get you the correct u-bolts to use the above bunk brackets. That said, I would not be able to locate specific bunk brackets so universal options like the above are your best bet.
view full answer... - What Diameter U-Bolts Will Work With CE Smith Bolster and Swivel Bracket Assembly I attached a photo of the CE Smith Bolster and Swivel Bracket, part # CE10000G you can check out. As noted on the photo, the slotted holes on the bolster are 2-3/4 inches long and 1/2 inch wide. There is a distance of 1/2 inch between the slotted holes. U-bolts like part # CE15283GA are recommended for the bracket. These U-bolts measure 3-13/16 inches long, 301/16 inches between the u-bolt legs and are 1/2 inch diameter.
view full answer...
- Does the CE Smith Swivel Bracket Come with a Bolster BracketThe swivel bracket # CE10200G is just the L-shaped bracket. it can attach to a bolster bracket. To get the bolster bracket with the swivel already on it you can use one of the following: # CE10000G, 9 inches tall # CE10001G, 11 inches tall # CE10002G, 13 inches tall There are also sets of 4: # CE10000G-4 # CE10001G-4 # CE10002G-4 I have also included a link to the bolster brackets we carry with and without swivel brackets attached.
view full answer... - Availability of Bolster Bracket for Attach Wood Bunk KitBased on what you described it sounds like you are looking for a swivel bolster bracket for your wood bunks like the part # CE10000G which is sold individually.
view full answer... - Replacement U-Bolts for Bunks on Escort Bunk TrailerWe have bunk U-bolts like the CE Smith part # CE15283GA which measure 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter which is a very common size that would most likely be what you'd need. I'd recommend checking out the size you have now and comparing them to these. If you need something different let me know.
view full answer... - Replacement Pontoon Boat Brackets for Boat Trailer or Boat LiftThe CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 9" - Qty 1 # CE10000G is designed to hold a boat on a trailer, so it isn't very different to have them on a boat lift. These will work well for the tritoon you referenced. You just use a bunk board at an angle on each sided of the individual pontoons. You will have 6 bunk boards and I've linked the page to the options for you. If you don't need a certain height, then the CE Smith V-Wing Bolster Bracket for Pontoon...
view full answer... - Replacement Bunk Brackets and Fenders for Escort WT20PDB-XFrom what I have found, the parts on the sheet you are talking about are no longer around. We do have some available options but they will not be identical to what you currently have. For bunk brackets for your Escort boat trailer, I recommend the CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel # CE10000G. According to the parts sheet, you have 15" wheels so you would need fenders to accommodate that size. The best option we have with steps is the Single Axle Trailer Fenders...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Installed by:
Joe V
Installed by:
Cole B
Video by:
Andrew K
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
David L
Updated by:
Chelsea B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Reagan K.
1/27/2015
The brackets are holding up great. No problems. Thanks!