Roller Bunks And Brackets That Can Be Angled To Fit V-Bottom Boat
Question:
Can these brackets be used with the Dutton-Laison roller bunks. In your video of the roller bunks it shows a flat-bottom boat and the brackets that are recommended are straight. My V-bottom boat will require an angled bracket, will these work for me? If these will not work what would you recommend.
asked by: Reggie
Expert Reply:
To be able to mount roller bunks to your trailer and allow them to be angled to match the hull of your boat there are rollers and brackets that will work for you.
You will need to use the Dutton-Lainson Boat Trailer Standard Roller Bunk, part # DL21755. These are black rollers that are 5-ft long. There are 12 sets of 2 rollers with this set.
The brackets that can be used with these rollers is part # DL21762. Four brackets are needed for a pair of roller bunks.
Products Referenced in This Question
Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- 3 Inch Wide
- Zinc-Plated Steel
- 10-3/4 Inch Long
- Dutton-Lainson
more information >
Continue Researching
- Shop: CE Smith Bolster and Swivel Bracket Assembly for Roller Bunks - Galvanized Steel - Qty 1
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755
- Shop: Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741
- Shop: Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Search Results: ce10000g
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Q&A: Recommended Roller Bunks for 600 lbs. Boat
- Q&A: Additional Height of Boat Trailer Standard Roller Bunk # DL21754 When Mounted on Bunk Boards
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Video: Review of Dutton-Lainson Boat Trailer Parts - Boat Trailer Roller Bunk Bracket - DL21762
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10003G
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Water Test
- Search Results: trailer jack
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: bearing buddy
- Shop: Trailer Wiring
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Shop: Suspension Enhancement
- Search Results: spare tire carrier
- Article: Trailer Wiring Diagrams