Review of Draw-Tite Heavy Duty Receiver Hitch - Weld-On - 41990-16 Video

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require either the 7…

The Curt Trailer Hitch Receiver part #C15845 that you referenced is a confirmed fit for a 2016 Ford F-550 cab and chassis with frame rails spaced 34" apart (outside to outside). However, Curt does not test this trailer hitch with dump body…

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…

The thickness of the tube of the Curt 18" Combo Bar with 2-1/2" Trailer Hitch Receiver #C49511 is 1/4" so the tube itself is 3" square. I have added a link to a video review for you to check out as well.

When it comes to installing a trailer hitch on your 42 inch wide minibus I recommend The Adjustable Width Trailer Hitch Receiver for RVs, 22 inch to 72 inch Wide #13703. The trailer hitch has a high-gloss black powder coat finish that resists rust,…

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…

The side plates in the Curt Class 5 Universal Weld-on Hitch #C87CR have only been tested by Curt in the vertical position. With that they are not sure how the mounting brackets will hold up if mounted horizontally. I recommend the Buyers Products…

The only options that we currently have with a 90 degree elbow would be a T-Style Hook like the JR Products #37210625 or #37211775. This is obviously a bit of a design change versus a plunger style that plugs directly so it will take a bit of…

For your 2007 HS ADMIRAL SVE, your Hidden Hitch receiver sounds like it is capable of towing your trailer. The rated 5,000 lb capacity is without weight distribution, but from my research it is rated for 6,000 lbs with weight distribution just like…

The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.

The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W #BWHDRH25187 which has a 6-1/2 inch drop. The…