CE Smith Boat Trailer Parts - Guides - CE27600K90 Review Video

Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will…

The CE Smith Bunk-Style Guide-Ons for Boat Trailers part #CE27600 can be used on any trailer but traditionally they are not used on pontoons. Not saying we do not install them on pontoons. As a matter of fact we used the CE Smith Bunk-Style…

You should be just fine with the clearances you listed for the CE Smith Guide-Ons part #CE27600. 3 inches would be great for the horizontal clearance between the guide ons and the pontoons and 1-1/2 inches of vertical clearance would be just fine as…

Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part #CE27600K90 so that you'll get closer contact like you…

Yes, you can use the CE Smith Bunk-Style Guide-On Kit #CE27600K90 for the inside pontoons on your cradle lift. You will want to ensure that the uprights will not interfere with anything under your boat when on the lift. The uprights are 19-3/4"…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

When you set up a set of guide ons like the part #CE27640 you wouldn't want them to contact both sides of the boat at the same time. You would want an inch or two of clearance between the boat and the uprights. With the appropriate amount of…

The best option for your boat to move better on and off your trailer is to use the Dutton-Lainson Boat Trailer Deluxe Roller Bunks #DL21741. These rollers make loading and launching your boat easy. They are available in 4 and 5 foot lengths, so…

For bunk style guide-ons such as #CE27600 the bunk board and boat should only barely touch if at all. There isn't a hard and fast rule that says it should be this many inches. But since guide-ons are not meant to support weight like a regular…

If there is no flex in the bunks with the pontoon boat loaded, you should be fine with the 1/2 inch clearance. If you are possibly hitting the frame of the trailer when traveling I recommend replacing the bunk brackets with taller ones like part…

I spoke to my contact at CE Smith about the CE Smith Bunk-Style Guide-Ons for Boat Trailers part #CE27600 and they informed me that the distance from the outside edge of the frame rail to the inside face of the bunk board while at its widest setting…

We have a video review of the CargoBuckle G3 Retractable, Ratcheting Tie-Down Straps, #IMF18800, and I have linked it for you. Installation is straight forward. The straps have a mounting hole on the base and include nuts, bolts, and washers. All you…