Platform Dimensions for Reese Towpower 3-Way ATV Hitch

Question

Question:

What is the width dimension at the 3/4 inch hole mounting flange?

asked by: Eddie E

0

Expert Reply:

The Reese Towpower 3-Way ATV Hitch # RP7065000 measures 2" at two of the holes and then 2-5/8" at the middle one. I've attached a photo for you to reference.

expert reply by: Jon G

0

Platform Dimensions for Reese Towpower 3-Way ATV Hitch
(click to enlarge)

Answer 1

As long as the hole on your riding lawnmower is 3/4" you can use the Reese Towpower 3-Way ATV Hitch #RP7065000 which will simply bolt into that hole. This hitch will give you the length you need to use a hitch ball with a 3/4"…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For a 2002 Pleasure Way Excel TD on a Ford E-350 chassis you would need the Roadmaster Front Anti-Sway Bar #RM-1139-115.

view full answer...

Answer 4

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

view full answer...

Answer 5

For A 2002 Ford Pleasure Way Excel TD on a E-350 chassis with a V10 engine you'll need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR that you were already looking at.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

view full answer...

Platform Dimensions for Reese Towpower 3-Way ATV Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching