Mounting Suggestion For E-track To Aluminum Utility Trailer
Question:
I would like to take advantage of the versatility of the E-track system on my aluminum utility trailer, Alumina 6810 HBT. Im looking for suggestions or recommendations for mounting the track to the aluminum deck. I was thinking of using track on the deck and the same track on the under side and through bolting the 2 tracks together at intervals along the length. Thinking of using track on the underside simply because the holes should align. Any thoughts or recommendations would be appreciated. Tried to attach a couple of photos of the trailer and underside of deck, not sure if they made the message or not Thanks
asked by: Jim
Expert Reply:
For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 # E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide # e96RR. This will save you the expense of the dual track and will allow you the flexibility of plates between the braces or around them.
This track also comes in 4 foot # EM19147, and 2 foot # EM59150. I recommend using the E-Track Plastic End Cap # ET8730 to finish your tracks.
For versatile tie downs, I recommend the Erickson E-Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs # E59143 or the rings # 59131 if you already have ratcheting straps. If you want specific E-Track straps, I recommend the Erickson E-Track Strap with Ratchet - 2" Wide x 12' Long - 1,166 lbs # EM59136
Products Referenced in This Question
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5 Inch Wide
- 2000 lbs
- 4 Feet Long
- Erickson
more information >
Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- E-Track
- E-Track Straps
- 2 Inch Wide
- 1000 lbs
- 12 Feet Long
- Erickson
more information >
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5 Inch Wide
- 2000 lbs
- 2 Feet Long
- Erickson
more information >
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Installing E-Track on an Aluminum Trailer
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Search Results: e~track
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Search Results: e~track wheel chocks
- Q&A: Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
- Search Results: e~track anchor
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Search Results: e track
- Search Results: e~track straps
- Shop: Erickson E Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: E-Track Plastic End Cap
- Video: etrailer Horizontal E-Track Review
- Shop: Suspension Enhancement
- Q&A: Tips for Installing E-Track on a Trailer with Tube Aluminum Frame
- Shop: Trailer Wiring
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Search Results: aluminum e track
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e42VR
- Search Results: etrack screws
- Q&A: Testing a Vehicle Side 7-Way Trailer Connector for Proper Function
- Shop: Mud Flaps
- Article: How to Install E-Track in 3 Easy Steps
- Video: Erickson Tie Down Straps - Trailer - EM58522 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Vehicle Tow Bar Brake System
- Video: Review of Gen-Y Hitch Trailer Hitch Ball Mount - 2 Ball Torsion Stacked Receivers - 325-GH-1025
- Q&A: Can E-Track be Installed in Car Hauler for Multiple Car Widths
Scott S.
1/14/2020
Is there a corrosion issue due to the dissimilar metals involved when using the galvanized steel Erickson products on an aluminum trailer? If so, any suggestions on how to address this?