Review of etrailer E Track - E-Track Rails - e25VR Video

The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray #290-46004 would work for your 7' x 16' enclosed trailer, but there is a chance that it doesn't completely cover the bottom of the wheels and…

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

I went and pulled both the part #59131 and #59147 from our warehouse to get the dimensions you requested. The width of both measures 7/16 inch. The overall length of the part #59131 where it clips down into the e-track is 2-13/16 inches. That portion…

It depends on how much load you will be applying to the track, what you are holding with it, and how the trailer frame is made. If you can get to the trailer frame, use nuts and bolts to attach through the floor and the metal trailer frame. If you…

You can install the Erickson Horizontal E-Track #E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track…

If the axle has a straight spindle with an L44643 outer bearing, it would use the same L44643 inner bearing. So, we've got the bearings and their compatible L44610 races covered. For the grease seal, you're most likely needing a 34823 seal…

If your trailer has Etrack installed in it like the part #E19148 the Erickson ATV E-Track Tie-Down Kit #EM09160 that you referenced would be a great option. This kit has a safe working load limit of 1,500 lbs with a max break strength of 4,500 lbs so…

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

The best length for the cable of a breakaway system like the Tow Ready Trailer Break Away Kit #50-85-313 that you referenced will be just a bit longer than the safety chains. The breakaway cable should be longer than the safety chains according to…

Good question and the 2,000 lb working load limit (WLL) of the Erickson Horizontal E-Track such as the 5 foot #E19148 is the safe limit for the weight of the cargo the track is helping secure. To simplify, it is the cargo capacity that the track can…

Sounds like you are talking about using a single E-Track slot like part #SLSB to instal the Erickson E-Track Tie Down Ring #59131 in a tailgate application like the picture we recieved from a customer who did the same. There isn't an exact…