Erickson E Track Tie Down Ring - 1,333 lbs
(851 reviews)
Price: $10.18
In Stock
Erickson E Track Tie Down Ring - 1,333 lbs
Item # 59131
Retail:$23.71
Our Price: $10.18
You Save: 57%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (851)
- Q & A (0)
- Videos (2)
- Photos
Erickson E-Track - 59131
- E-Track Anchor
- 1333 lbs
- Erickson
Attaches anywhere along E track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.
Features:
- Tie-off Ring
- Color may vary
- Not compatible with Snap-Loc E track Tie-Down Anchors
Specs:
- 4,000 lbs Capacity
- Safe Working Load Limit: 1,333 lbs
- Ring dimensions: 1/4" thick x 1-7/8" inner diameter
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
59131 Erickson E-Track Tie-Off Ring - 4,000 lbs
Video of Erickson E Track Tie Down Ring - 1,333 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Erickson Tie Down Anchors - Trailer Tie-Down Anchors - 59131 Review
Today we are going to show you part number 59131 from Erikson. This is a part to our E-Track. This is an E-Track D-Ring which is rated at 4,000 pounds. It will fit on all traditional E-Track systems. We will go ahead and show you how it works. All you do is pull this little tab back and it snaps into place then you can tie off what you want to it. You can even attach a regular tie down to it. That is it for part number 59131 from Erikson the 4,000 pound D-Ring.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Erickson E Track Tie Down Ring - 1,333 lbs - 59131
Average Customer Rating: 4.9 out of 5 stars (851 Customer Reviews)
Attaches anywhere along E track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.by: Penny12/11/2022
Great for my home gym. Sturdy. Low cost. Vertically mounted the Erickson Horizontal E-Track and used the Erickson E-Track Tie Down Rings with carabiners for easy height adjustments and swapping out different bands, just like at Fluid Health & Fitness where I take classes and work with a Movement Specialist. The 1 x 4 board is screwed to a wall stud and then the E-Track is attached to the board and into the sheet rock. The Man of the House says he "over-engineered" it. ??
by: Matt S12/12/2013
As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.
by: Bob B. - etrailer.com Employee12/26/2013
Let me just start by saying I Love etrack! These tie off rings make loading the truck and trailers quick and easy. I even installed a couple on the side of my tailgate so i could strap down longer items when tailgate is open. (Dont forget to remove the ring when done and closing tailgate)
by: Nicholas 08/09/2023
Easy to attach and use with generic cargo straps. I have used these tie-down rings for several interstate trips hauling light cargo and motorcycles with no problems. Large ring allows easy threading of cargo straps and attachment of strap hooks.
by: Stephen 04/23/2024
Great customer service, and super fast shipping. Always a great experience
by: Doug l07/18/2017
Perfect for strapping down anything in your trailer with easy tracks
by: David, SMSgt, USAF12/28/2010
the BeastAttached are pictures of the "Beast" The truck and trailer are utilized to
haul a miniature C-130J aircraft in support of Air Force Reserve recruiting
activities in Louisiana, Mississippi, and Alabama. We exclusively use
etrailer.com for our E track straps and D rings.
activities in Louisiana, Mississippi, and Alabama. We exclusively use
etrailer.com for our E track straps and D rings." />
by: Kay02/13/2023
Missing items due to packaging not secure and damaged box
Jenny N.
2/13/2023
I will have our Customer Service team contact you.
by: david04/20/2021
We've finally been able to install the etrack in our trailer and it looks, and works, great. I've attached a few pictures we took of the installation.
by: Michael 02/07/2024
Makes securing the ATV's easy.
by: Rick10/14/2016
Best cargo anchors. Use them a lot on both my cargo and utility trailers....Shipping costs are nominal compared to other sites....
by: Michael 02/11/2024
sturdy well made
by: Patrick11/29/2023
I have a 2022 Hinda Goldwing and they worked great! Simple and easy to use.
by: Charles06/26/2023
Easy in and easy out. Perfect for my constantly changing trailer needs.
by: Richard 09/28/2022
I Installed approx 14 feet of e track Two rows long in my enclosed trailer to go under my tires for my side by side. It has worked out better than expected as I can secure things down the entire length of my trailer . The side by side is secured with wheel bonnets and does not move one inch while traveling from my place in Utah to my place in Wyoming. Love this product and highly recommend .
by: Darius05/01/2023
Just recieved my order today. Do not have the hooks installed yet but, they appear to be everything I was looking for when I ordered them. Well built and work in the tie down railings very well.
Very prompt order and delivery. Will be ordering more equipment in the future.
by: James/ Disabled American Veterans Chapter 302/19/2023
We use them almost every day we go out to pick up donations and need to secure the items we are hauling.. They come in handy when we need to move them to another location within the trailer that we are using..
by: RONBO02/25/2015
I've used these Erickson E-Track tie-off rings for many years in all my other trailers. I bought a new trailer and therefore, needed new tie-off rings. These units are the lighter version of ring available from Erickson and I've used both types to secure my ATVs. I've never had any problem with either tie-down. These units are plenty strong enough to hold any ATV, motorcycle. In fact, I've hit terrible potholes and other obstacles with my trailers over the years, that I've had ATV's pop the tie-down straps off. However, no matter how hard the jolt, I've never had one of these Erickson rings pull lose, bend, crack, or any other malfunction. In addition, they are super easy to remove, reposition, attach etc. They lock into position as soon as they are fully inserted into the E-tracks sytem.
Ronbo
3/10/2016
Thanks for the follow-up. All the products I purchased are performingwonderfully!
by: Konstantine12/04/2023
They have worked well for us
by: Dave B.07/18/2016
I have a 20 ft enclosed cargo trailer that I planned to use to move from California to North Carolina. Was not sure about how to secure the load. Did some research and settled on the E Track system. Not having ever used E Track before, I found the instillation and use very simple. I installed two rows on each side the full length of the trailer. In the front I used the optional E track board holders and made a shelf 8ft by 4ft with 2 x 6's and a full sheet of plywood to secure fragile items. Two trips across the United States with very full loads and not one load shift. Great product and would highly recommend it. Thank you etrailer.com for your great service.
Dave B.
7/25/2017
A year and a half later and a lot of use out of my trailer using the E Track system to secure the loads. Great produce that was easy to install and easy to use. HIGHLY recommend the E Track system.
by: Jim MC987610/06/2014
I think these E-Track tie rings will work out perfectly. In another review, I review the E-track Wood Beam Sockets and how I made a tire rack and shelves in my car trailer using the E-Track which I also bought from E-Trailer.
I'll use these E-Track tie offs to tie down the tires, and any loose items on the shelves, so that they don't bounce around which on the road. It'll be a breeze to use either some straps or rope to tie down anything I need to, and having the flexibility to position these tie downs anywhere I want on the E-track, is absolutely perfect.
I also thought that they were priced fairly and made well. Add to those qualities all the benefits of doing business with E-Trailer and it's a home run!
Jim M.
10/6/2015
As I thought, these E-track tie down rings worked out perfectly. Nothing has ever fallen, bounced, or even moved pout of place when straps are used to secure the load to these E-track rings.
by: Tommy04/21/2016
Excellent product! I bought 2 of the 4-ft e-tracks. These are heavier duty than I thought they would be. They are extremely practical for my 10' wood floored utility trailer. If you are like me, there aren't many good tie down points on wood bottomed trailers. These are an easy fix for a host of applications. They work great for having multiple points to tie down my 4-wheeler or lawnmower. I will definitely recommend! The only better would have been free shipping.
by: John N05/28/2014
Awesome idea! These are great to have with the E Track system!!!
by: Kaas Baichtal07/26/2016
These feel a bit cheap and cheesy but they work great. I had installed E-track lengthwise (front to back) on the floor of my trailer and have a lot of need to tie loads with diagonal and/or track to track forces and these worked great for that, since they seem to be pullable in any direction without deforming. The heaviest item I fasten down is a walk behind lawn mower.
Kaas B.
7/26/2017
We still use these a lot and are still on our original ones. All other latching items we got for the e-track bent too easily but these are great.
by: Ron03/15/2023
All of the products I have ordered from etrailer have been exactly what I was expecting, and they have performed flawlessly.
Thank you!
25
826
Show More Reviews
See what our Experts say about this Erickson E-Track
- E-Track and Motorcycle Wheel Chock Recommendation for Securing Motorcycle to TrailerThat sounds like a great plan, the E-Track part # E19148 will provide a great tie-down point for securing the motorcycles. For tie-down rings you would want the # 59131 and then for a wheel chock I would recommend the # 3481731 because of how well it secures motorcycle and how easy it is to use. Check out the review video I attached for more info.
view full answer... - Compatibility of Erickson ATV E-Track Tie-Down Kit EM09160 with Brophy Backing Plate BPEZErickson E-Track fittings like the Tie Down Ring # 59131 will work just fine in their ATV E-Track Tie-Down Kit # EM09160. Please note you will supply appropriate installation hardware for the ATV kit based on the requirements of the mounting surface where you will install it. The four outside holes on the etrailer plate # e96RR do generally align with the mounting holes on the ATV kit but we have found that it may sometimes be necessary to enlarge two of them to get the best fit. Just...
view full answer... - Using The E-Track Trailer Cargo Control # EM59150 On Trailer To Secure ATVs and MotorcyclesInstalling the E-Track Trailer Cargo Control, part # EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described. The E-Track can also be mounted on the wall of trailers, so perhaps you could mount the track for the ATVs on the floor towards the front of the trailer. Then you could mount track on the trailer walls for the motorcycles or on the floor as...
view full answer... - Can the Erikson E-Track System Be Used In An Aluminum Utility TrailerThe Erickson E-Track system will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals. This layer can consist of almost any material, such as wood, rubber, or plastic. When installing the E-Track system in a trailer, one thing to keep in mind is to select locations that provide structural components, such as wall studs and floor supports....
view full answer... - E-Track Recommendation for Installing on the Inside of a Carson Fun Runner Toy HaulerSounds like a good plan. For the 5 foot sections of the E-track you would want part # E19148. The # EM59150 that you referenced is sold in 2 foot sections. You might also be interested in the E-Track Tie-Off Ring # 59131, E-Track Wood Beam Socket # 59149, and E-Track 2" D-Ring part # E59143.
view full answer... - Anchoring E-Track On Floor Of Van For Transporting a MotorcycleTo secure the Erickson Horizontal E-Track # EM59150 you need to use the E-Track Backing Plates # e66RR to secure them to the floor. The screws can easily pull out of the plywood especially considering your van will be absorbing a lot of road shock. You will want to ensure that the plywood is also secured to the floor either with the backing plates or in another similar manner. This will ensure that your Harley stays secured to the floor and will not move. I recommend using the Erickson...
view full answer... - Recommended Parts For Adding E-Track Rails To Detail K2 Mighty Multi Utility Trailer # K2MMT4X6I reached out to Detail K2 and they informed me they do not recommend making the tongue on their Mighty Multi Utility Trailer # K2MMT4X6 foldable. They said this will void all the trailer warranties. I recommend installing some etrailer Horizontal E-Track # e25VR on the floor of the trailer for attachment points. You will be able to fasten these to the underbed using the etrailer E-Track Backing Plates # e46RR. This will allow you to use a Tie Down Ring # 59131 with some traditional Straps...
view full answer... - Will E-Track Tie Down Anchors Fit in Snap Lock Horizontal and Vertical E-TrackYes the e-track tie down anchors like the # 59131 can be installed in the Snap-Lock Horizontal and Vertical E-Track # SL27FR that you referenced. Basically any e-track accessory will fit in the # SL27FR that you referenced.
view full answer... - Using E-Track and Accessories in a 5 x10 Enclosed Trailer to Carry a Harley or an ATVIn order to secure either a motorcycle or ATV I recommend 2 sections of E-Track # E19148 so that you can have one on either side of the motorcycle. This will be the most stable set up for the bike. The ATV really only needs to use one of the tracks to be secured using a wheel net with E-Track fittings, # 77314. For the motorcycle I recommend using at least 2 of D-ring # 59131, assist straps # 06303, and some ratchet straps such as # 34414. I have included some links to videos on these...
view full answer... - Length and Width of E-Track Tie Down Anchors 59131 and 59147I went and pulled both the part # 59131 and # 59147 from our warehouse to get the dimensions you requested. The width of both measures 7/16 inch. The overall length of the part # 59131 where it clips down into the e-track is 2-13/16 inches. That portion of the # 59147 measure 2-3/4 inches.
view full answer... - E Track Placement Recommendation for Motorcycle TrailerBasically you'll have to mock up where you want the motorcycle to be and where the best place will be for the e-track as there isn't a set place to install the tracks in every trailer. Typically you want the tie down anchors to be about 36 inches apart from each other to get the best angle for them to pull down. For tie down anchors that fit in the e-track slots we have the part # 59131 which would fit and work well. Then for a set of ratchet straps the Erickson kit part # EM31353 would...
view full answer... - E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic MotorcyclesWith cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I recommend you make sure they are secured either to the metal structure of the trailer or use metal plates like the E-Track Backing Plate, part # e96RR, to make it as secure as possible. If the interior floor and walls are 7 ft long I recommend 5...
view full answer...
- E-Track Recommendation for Securing ATV to Utility TrailerE-track can easily attach to the wood floor you have in your open utility trailer. This is a very common style of trailer that is used with the E-tracks. I attached a couple review videos that show etracks installed in a similar trailer as yours and what they use to secure the cargo. The etrack sections like the part # E19148 would be more than adequate to secure your ATV. The # 59131 is a great anchor to use, or if you want a strap that attaches directly to the etrack we have the # EM59136...
view full answer...
- Cargo Solutions for a 7 x 16-Foot Enclosed Trailer Erickson's E-Track Cargo Control systems offer excellent flexibility at a moderate cost. Their E-Tracks are offered in several lengths, such as a 5-foot # E19148 for horizontal applications. Many types of accessories are offered as well, including tie-off rings like # 59131, D-rings like # E59143 and ratchet straps like # EM59136. I have included links for both E-Track items as well as some interior trailer cargo control items.
view full answer... - Hardware Recommendation for Securing E Tracks to Plywood Trailer FloorSecuring the Erickson E-Track # E19148 to 3/4 inch plywood should be sufficient. To secure the track to the plywood, you can use screws, or rivets. Using 1/2 inch screws would be a good length with 3/4 inch plywood. You will want to attach screws at least every other mounting hole. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch D-Ring, part # E59143. Also available is the Erickson E-Track Strap with Ratchet, part # EM59136.
view full answer... - Recommended Erickson E-Track System for Transporting Motorcycle in Enclosed TrailerInstalling the Erickson Horizontal E-Track # E19148 in your enclosed trailer is an excellent idea. Along with securing your motorcycle into place, the E-Tracks will provide great versatility to tie down various other cargo items in your trailer. For your motorcycle, I recommend installing the tracks on either side of the motorcycle to provide multiple tie-down points in order to keep it secure. Then you can use the Erickson E-Track Tie Down Rings # 59131 along with D-Ring Straps # E59143...
view full answer... - E-Track and Parts Needed For Securing Motorcycles In a Enclosed TrailerYes, you can place the etrailer Horizontal E-Track # e25VR across your trailer from side to side. This will allow you to use the CargoSmart Motorcycle Wheel Chock # 3481731 making it easier and safer to secure your bikes in your trailer. Be sure to use the etrailer E-Track Backing Plates w/ Hardware # e46RR to secure each of the 5' tracks in place. Each of these kits includes 3 brackets for each track. I recommend using the Erickson E-Track Tie Down Rings # 59131 and Cam Tie-Downs # EM05729...
view full answer... - Tie Down Ring/Anchor that Fits Ford Box Link in F-350 BedYes the E-track accessories like the Tie Down Ring # 59131 do fit in the BoxLink cleats in the bed of Ford trucks like your 2018 F-350.
view full answer...
- Option to Carry Kayaks with E-Tracks Inside Cargo TrailerI am not aware of an e or x-track accessory that is designed specifically for carrying kayaks but we do have options for this assuming the tracks are on the walls. I recommend using a few CargoSmart Large Rotating Flat Hooks part # 3481701 to suspend the kayaks and then a few Erickson E-Track Straps with Ratchet part # EM59136 to hold them in place. The Erickson E-Track Tie Down Ring part # 59131 along with some standard ratchet straps can be used as well.
view full answer... - E-Track Recommendation to Secure 4 Motorcycles in an Enclosed TrailerYou would be more than okay to run two tie downs off of one the E-Track Tie-Off Ring part # 59131 that you referenced. Each of these has a 4,000 lb capacity which would be more than enough for what you are doing. Your plan to use 9 of the E-Tracks # EM59150 with the # 59131 like the drawing you sent in would work perfectly. For backing plates you could use the part # e96RR. I attached an install video for the E-track for you to check out as well.
view full answer...
- Is Erickson E-Track Trailer Cargo Control Available With Galvanized Mounting BaseIt is possible that the galvanized plate is a custom job, it could be part of the cargo truck, or the track was already installed in the truck from the manufacturer. The item you selected, Erickson E-Track Trailer Cargo Control, part # EM59150 is zinc plated. The E-Track can be mounted using screws, or rivets. If using screws, I would use a stronger grade screw like sheet metal screws. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch...
view full answer... - Ratcheting Strap that Retracts But as an E-Track Mounting EndI do have a couple of options for you for the etrack mounting. We have the CargoBuckle G3 Retractable Ratchet Straps w/ E-Track Adapters - 2" x 6' - 833 lbs - Qty 2 # IMF18800-87 and the CargoBuckle Mini G3 Retractable Ratchet Straps w E-Track Adapters - 1"x6' - 466 lbs - Qty 2 # IMF103745-87. Another option is to use the ratcheting strap you want, # EM34416, and then use an E-Track tie off ring # 59131 and hook onto it with one end of the strap. Another option is a strap like # EM59136....
view full answer... - Recommendations for Carrying 5 or 6 Bikes on a 5 ft by 8 ft TrailerTo carry five or six bikes in your trailer, I would recommend picking up five or six Yakima BlockHead truck bed bike mounts, # Y01117. These bike mounts can mount to the side rails or floor if you have an open utility trailer or they can mount to the walls or floor if you have an enclosed trailer. The fork mount design allows you to mount multiple style and sizes of bikes on the same mount. You could also take a different route and install a cargo control system like the E-Track, # E19148,...
view full answer... - Will Erickson and US Cargo Control Accessories Work With etrailer Horizontal E-TracksI can't confirm US Cargo Control as this is not a brand we carry but the e-track fittings are fairly standardized so you should be able to use any brand designed for e-tracks such as the Erickson E-Track Tie Down Ring part # 59131 with the etrailer Horizontal E-Tracks like part # e62VR
view full answer...
Do you have a question about this E-Track?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Andy C
Updated by:
Wilson B
Updated by:
Jacob W
Updated by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug L.
7/18/2018
Still working like day 1.