Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
(1170 reviews)
Price: $33.63
In Stock
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
Item # EM19147
Retail:$37.05
Our Price: $33.63
You Save: 9%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1170)
- Q & A (0)
- Photos
Erickson E-Track - EM19147
- E-Track Rails
- Horizontal
- 4 Feet Long
- 2000 lbs
- Erickson
- 5 Inch Wide
4' E track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.
Features:
- E track provides tie-down points for securing cargo in your trailer, truck, or van
- For use with E track straps, anchors, and accessories (sold separately)
- 4' Long section has multiple horizontal anchor slots
- Zinc-plated, 12-gauge steel construction is corrosion resistant
- Requires screws or rivets (not included) for bolting onto floor or wall
Specs:
- Dimensions: 4' long x 5-1/4" wide
- Distance between mounting holes: 2"
- Safe working load limit (WLL): 2,000 lbs
- Maximum load (break strength): 6,000 lbs
- 90-Day limited warranty
Notes:
- It is recommended that you use a backing plate (sold separately) every 12" for best results.
- Use all mounting holes on this E Track for optimal installation.
19147 Erickson Manufacturing Horizontal E-Track Trailer Cargo Control - 4-Foot Piece
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Alternate product found
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1 - EM19147
Average Customer Rating: 4.9 out of 5 stars (1170 Customer Reviews)
4' E track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.by: Tommy04/21/2016
Excellent product! I bought 2 of the 4-ft e-tracks. These are heavier duty than I thought they would be. They are extremely practical for my 10' wood floored utility trailer. If you are like me, there aren't many good tie down points on wood bottomed trailers. These are an easy fix for a host of applications. They work great for having multiple points to tie down my 4-wheeler or lawnmower. I will definitely recommend! The only better would have been free shipping.
by: Randel01/26/2021
This E-Track (and E-Track straps) was installed on the wall of my box trailer to secure a rolling took chest. It has performed flawlessly. Thanks again etrailer, for a great product.
by: Nicholas 08/09/2023
Easy to use with E-track attachments. Low-profile and snag-free when hauling cargo that does not need the E-tracks as attachment points. I have used these for several interstate trips with no complaints-- still look good as new.
by: Darrell P.08/02/2018
We used the E-Track system in conjunction with the Erickson E-Chocks, Erickson Roller Idler, and the Erickson E-Track Strap with Ratchet to hold down the car in our enclosed trailer. Installation was easy and was completed in a short amount of time. This eliminates the trip hazard of straps extending to D Rings, and eliminates potential damage from tie downs connected to frame on rough roads. I would highly recommend this system to anyone needing to tie down anything with tires.
by: Anthony 04/02/2024
Excellent strength and easy to install!
by: Mike 11/08/2023
Works great. Easy install. Highly recom mended
by: Felix R.01/13/2017
The following review is the same as the one I left for the 2ft E-Track. This track is very well built and makes securing cargo in my trailer easy and convenient. Installation was a snap with an extra helping hand. Highly recommend upgrading walls in an enclosed trailer to a quality plywood .46 inches or thicker, to be able to utilize the track to its full potential. The only drawback I had with the track is that the holes are not drilled out to 5/16th's like the backing plates. I had to drill out the holes I used with my step drill bit to ensure my 5/16th's hardware worked. Highly recommend utilizing grade 5 or higher nuts and bolts for a secure, reliable installation.
Felix R.
1/16/2018
Anchors are very well built and have performed extremely well. They fit on the E-Track perfectly and have not failed to hold their load safely. Highly Recommended!!
by: Scott05/22/2016
Decked out my new cargo trailer with this e-track. Looks sweet! Heavy gauge construction. Easy installation. Along with the Erickson E-Track straps now I'm ready to haul just about anything safely and securely. Thanks etrailer!
Scott
1/30/2018
Still loving it! Thanks for the follow up.
by: Hans 09/06/2023
Needed for strapping down to the floors or walls. Super easy install.
by: Ken B04/21/2015
I LOVE e-track. It is 100X easier to tie stuff down in my trailer when I can move my tie down points to suit each unique load, compared to fixed tie down products.
I put two rows of eTrack on each side of my trailer. Not only does that give me tons of tie down options, but using their 2x4 anchors I can make a movable barrier to separate things that are too small to tie down, so they don't move around. For example helping someone move all their household crap -- put all the small stuff in the front, and keep it there with a barrier that I can position anywhere I want.
eTrailer has these tracks at a great price compared to Harbor Freight and Northern Tools. And these tracks are much heavier gauge than the tracks carried by those stores.
by: Greg07/28/2019
Excellent build quality, very easy to install and exceeded expectations.
by: John F08/24/2015
I ordered a variety of e-track components from etrailer to install in my 20ft enclosed Haulmark trailer. With only four factory installed recessed D-rings the trailer offered very few tie down options. Etrailer extensive product catalog provided one-stop shopping and their videos were very helpful when researching configuration and installation options. All products arrived on schedule and I am very impressed with the quality.
by: Chris F01/12/2020
The E-Track system I purchased is vey well designed and easy to install. This system works great in my trailer that secures my classic cars. I definitely recommend this E-Track system as it is a great product.
by: John L08/22/2016
Bought E-Track to attach to the walls of my 5th Wheel Toy Hauler to attach stuff. Found out that I don't have any studs to anchor to. Attached to the paneling with anticipation that they would not stay, I was wrong. Holding very well and I am totally pleased with the results.
by: Alan d04/29/2017
Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order.
All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage.
The e-track is heavy duty, much more than I had expected and it was easy to install.
Looking forward to upgrading my trailer even more from etrailer.
Thanks again!
by: Bill C04/06/2015
The E-Track and D-Rings are great. The shipping was super fast. The only downside was the E-Track sections were wrapped together with shipping tape, so after pulling off the tape, there was a lot of "goo" left on the surfaces. Took awhile to clean everything off.
by: Dave T04/05/2019
I installed these in a 6x14 box trailer with 1/4" sheet metal screws into the metal framing (side panel). They are strong and provide a lot of flexibility. I use the horizontal tube and rectangular holders for fishing poles, pipes and other similar gear. Goes well with E59143 also and the various hooks like EM59142.
I used 2 4' horizontals and 2 2' horizontals to provide good coverage on the door side of my trailer and am very pleased with the install.
by: William03/11/2019
Yes I did receive the order and it was exactly what I needed. I installed the etrack on my trailer and hauled my bike to Florida. It worked great and I didn’t have to worry about the tie downs coming loose.
Thanks
by: Ron B07/21/2015
Great product. E track was straight and not damaged on delivery. One box for the long pieces 5' should have been smaller, a lot of waisted space on shipping. Easy to install, watch their video on installation which helps alot. Does take some time to install.
by: Jason 02/25/2021
The track is good. I have not gotten to use it much since I put it in a trailer that is used for sound engineering and the coronavirus pretty well squashed all the business. But I like it and I'm happy with the product.
by: Mark08/23/2022
The product was good but the box it came in was horrible. They were loose inside a way oversized box and had busted out the end. There was about 5” of the tracks sticking out of the box that could have been damaged or fallen completely out and been lost.
by: Bill R.05/30/2019
Tracks work good but the straps I got are terrible. They only pull up snug, you can’t ratchet them down tight. The straps work loose quite often and I have to reattach them. I would not buy them again.
by: Rich08/25/2016
Better than advertised! Fast shipment and outstanding customer support! Best set up to trailer my Can Am Spyder!
Rich
11/1/2017
Still very satisfied...thanks for asking!
by: steve s.06/01/2017
I received my order a few days ago. Everything was there and well packaged. I had great help and answered my questions. Now the work begins installing my E-track on my new car trailer and getting everything to work the way I want it to. Thanks etrailer for your help.
Sincerely,
Steve S.
by: John02/01/2020
Bought four tires and wheels for not much more $ than tires only at local tire store. Got them 4 days after order. I would rather bolt them on myself than sit in a tire store.
25
1100
Show More Reviews
See what our Experts say about this Erickson E-Track
- Is Strength of E-Tracks Based on Direction They Support WeightThe E-tracks were designed to give quite a bit of flexibility in how they can support weight. But in general forward to back would be a bit stronger just based on how the mounting holes line up and the leverage they would have over the cargo. If the angles aren't severe there wouldn't be a noticeable difference. On a two inch wood floor wood screws would be just fine. I would go with at least every other hole used on the tracks for max strength.
view full answer... - Vertical or Horizontal Etrack for Securing Bed to Cargo Trailer FloorSince your plan is to put the etrack on the lowest part of the trailer walls as possible I think vertical etrack like part # E19146 would be the best. But if you wanted horizontal it would work well too realistically. For that part # EM19147 would be what you need.
view full answer... - Can Erickson Mini E-Track Plate be Used as Tie-Down for UTV or ATVYes, you can use the Erickson Mini E-Track Plate # EM09134 with E-Track ratchet straps such as the CargoSmart Ratchet Straps for E-Track - 1" x 6' - 500 lbs # 3481717 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523, though you would not be able to use wheel chocks. I went out and test fit the plate with the Erickson E-Chock Wheel Chocks # EM09162-2 and found they would not fit. So if you were okay with not using wheel chocks - for...
view full answer... - Suggestions for Using Erickson Horizontal E-Track to Secure Bikes in Toy HaulerSince I don't have your toy hauler and bikes in front of me, it is going to be difficult to make a specific recommendation for set-up but if it were me I would use a few pieces of scrap lumber or cardboard cut to the size of the E-Track pieces to help figure out the best set-up. The horizontal tracks are available in 5 different lengths: # EM19145 for 2 in # EM59150 for 2 ft # EM19147 for 4 ft # E19148 for 5 ft Once you have the pieces cut I would work it like a puzzle loading the bikes...
view full answer... - Recommendation on the Number of Tie-Down Straps Needed When Securing Vehicle Using E-Track RailsYou will be able to secure your ATVs to your trailer using two Erickson E-Track Wheel Tie Downs. # EM58523, on two wheels of each one of your vehicles. These Erickson tie-down straps will connect to an E-track rail, like the Erickson 4 Foot E-Track Section # EM19147, to allow you to safely secure your ATV to your trailer. The straps measure 12 feet long and will have plenty of length to fit the 31 inch tires on your Polaris RZR. I have attached two product review videos of both the Erickson...
view full answer... - How To Secure a Can-Am Spyder On a TrailerI am not sure what products you are referring to but the most safe, secure, and easy tie down method we offer for your Can-Am Spyder is a combination of the Erickson Horizontal E-Track part # EM19147 (3), the Erickson E-Chock Wheel Chocks part # EM09162-2 (2 or 3), and the Erickson E-Track Wheel Tie-Down Strap part # EM58523 (3). The E-Tracks will get installed on the trailer and under each of the three wheels. You will then place the front E-Chocks on the E-Track to help you guide your...
view full answer...
- Mounting Erickson E-Tracks to 3/8 Inch Plywood or Vinyl Covered WallsTo mount Erickson E-Tracks like the 4 Foot Long # EM19147 that you are looking at you will want to use 1/4 inch diameter screws/bolts. The length is entirely dependent on the application but for 3/8 inch plywood I really recommend first securing the plywood to the trailer frame in as many points a possible (if not already done so). You can also remove plywood from the areas you plan on installing the E-Track and reinforce the back of the plywood with a mounting plate like # e96RR. You...
view full answer... - Using E-Tracks to Secure 6,000 Pound Tractor on TrailerThe E-Tracks we have available differ in size but they all feature the same 2,000 pound safe working load limit. In order to stay within the working limit of the tracks themselves I recommend installing shorter sections like the 2 Foot # EM59150 or 4 Foot # EM19147 for each tie-down point (4 total) on your tractor. This will give you a combined safe working load limit of 8,000 pounds and will work great with Tie Down Rings like # 59147 and Ratchet Straps like # EM78627-MS to safely secure...
view full answer... - Hardware for Attaching E-Track to Wood Floor and WallsSince you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part # EM19147 would be the Erickson Hardware kit part # SL49FR which is basically wood screws.
view full answer... - How Long Of E-Track Should be Used for Securing Car to Enclosed TrailerYou would want to run a length of E-track basically the entire length of your car from bumper to bumper to ensure you have enough to secure the wheels with the wheel straps like part # 77314. Measure the length of your vehicle from bumper to bumper and try to match that length with the amount of etrack you install. The part # E19148 is 5 feet and part # EM19147 is 4 feet.
view full answer... - Can Erickson Horizontal E-Track # EM19147 be Used on PlywoodIf you used at least every other mounting hole to secure the E-track part # EM19147 to the plywood and the wood itself was rated for the weight as well you'd be totally fine.
view full answer... - How Big are Mounting Holes on E-TrackThe mounting holes on the E-Track such as # E19147 are 1/4 inch in diameter. The type and length fastener you should use will depend on the surface material and thickness you are attaching it to. For example, if the surface was ACQ treated wood you could use # TFX250ACQ which is 2-1/2 inches long.
view full answer... - Best Tie Down Method for Transporting Luxury VehiclesThe best way to secure you Ferrari F430 to a trailer will involve an E-Track system. For this you are going to want a few items. First you will want a set of tracks like the Erickson Horizontal E-Track part # EM19147. You will want four of them, one under each wheel. You will then want to use a set of tie-downs compatible with these tracks and for that the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet part # EM58523 will be your best option. You will again want a...
view full answer... - Is Securing E-Tracks to Beams 16 inches Apart in Trailer Strong EnoughYes, the E-Tracks like the part # EM19147 can be installed like you described. Having them attached to beams at 16 inches apart like you mentioned would be adequate to support the weight of securing your motorcycles.
view full answer... - Recommendations for Attaching E-Track to Floor of Aluminum TrailerI'd recommend through bolting the e-track into the available cross members under the trailer floor. You'll want to fasten the e-track to the floor in between those points, but the fasteners you'd use and how many of them will depend on the structure of the floor. If you're talking a wood plank floor, you have plenty of floor structure for the fasteners to bite into, so attaching the track every foot or so would be fine. If the floor is thinner metal, you'll want to use self tapping screws...
view full answer... - How To Secure a Car with Raised Letters On Tires Using Wheel Strap Tie-DownsYes, the Erickson E-Track Wheel Tie-Down Strap part # EM58523 is exactly what you are looking for as it does not come into contact with the face of the tire like the Erickson Adjustable Wheel Net with E-Track Fittings part # 77314 does. These will both hook into the Erickson Horizontal E-Tracks like part # EM19147. I have attached a list of the different lengths tracks we offer as well as a photo.
view full answer...
- Erickson E-Track Tie-Down Kit w/ Ratchet Straps # EM58523-09162 Recommendation for Car HaulerFor securing a vehicle to a trailer the Erickson E-Track Tie-Down Kit w/ Ratchet Straps # EM58523-09162 that you referenced is a great choice. It's very easy to use and works well. It also gives flexibility in how the vehicle will attach to the floor since the different slots can easily be selected. It will require you to install E-tracks on the floor of you trailer though like the # EM19147 for 4 foot long sections. For a backing plate to install on the bottom of the trailer we have the...
view full answer... - How To Secure a Can-Am Spyder On a TrailerI am not sure what products you are referring to but the most safe, secure, and easy tie down method we offer for your Can-Am Spyder is a combination of the Erickson Horizontal E-Track part # EM19147 (3), the Erickson E-Chock Wheel Chocks part # EM09162-2 (2 or 3), and the Erickson E-Track Wheel Tie-Down Strap part # EM58523 (3). The E-Tracks will get installed on the trailer and under each of the three wheels. You will then place the front E-Chocks on the E-Track to help you guide your...
view full answer...
- Differences Between Horizontal and Vertical Erickson E-TracksErickson E-Tracks are offered in various lengths and for either horizontal or vertical installation on your trailer's deck or interior walls. An example of a vertical E-Track is part # E19146 and examples of a horizontal track are part # EM59150 and part # EM19147 that you referenced. You'll notice that the direction of the slots does differ. You will want to use 2 fasteners minimum per linear foot of track. Use fasteners on both sides of the track. So for example, a 2-foot track section...
view full answer... - E-Track Wheel Strap Solution for Larger Diameter WheelsIf you installed e-track on the floor of your trailer like the part # EM19147 you could use the Erickson E-Track Tie Down kit part # EM58523-09162 which would attach to the track and since it has a strap length of 12 feet it would easily fit a 35 inch diameter tire. Otherwise there isn't a kit like you mentioned that would fit that diameter of tire.
view full answer... - How Much Can the Erickson Vertical E-Tracks HoldThe Erickson Vertical E-Track part # EM19147 that you referenced has a 6,000 lb total weight capacity. If you were using two of them, one on each side with a beam in between then the weight capacity would then be doubled. Therefore, the tracks themselves are not going to be the weak link but rather how you anchor them. It is going to be difficult to attach the tracks to a cylindrical pipe but it can be done. The best way in my opinion would be to make a backing plate with mounting holes...
view full answer... - Tips for Installing E-Track on a Trailer with Tube Aluminum FrameOn an 4 foot long section of E-track # EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that the fasteners are anchored. This is harder to do since you need access to both sides of the vertical supports of the frame. Another option is to use several backing plates, # e96RR, which will disperse the weight over a larger area. So if...
view full answer... - Can E-Track be Mounted Perpendicular to UTVThat's a good question and we have had a number of people wanting to do the same thing, but e-track does need to be mounted parallel to your UTV, in the direction of travel. Wheel straps pulling to the side, opposite the direction of travel, can put undue stress on the straps with what is essentially a moving load. So what you will want is horizontal e-track with wheel straps: - Erickson Horizontal E-Track - 4 Feet # EM19147 or 5 Feet # E19148 - Erickson E-Track Wheel Tie-Down Strap...
view full answer... - Should Erickson ATV E-Track Tie-Down Kit be Used on All 4 Wheels of 1,936 Pound Polaris RangerThe 1,500 pound working load limit (WLL) for the Erickson ATV E-Track Tie-Down Kit # EM09160 referenced in your question does refer to the combined capacity of both straps and chocks. Since your Polaris Ranger weighs close to 2,000 pounds, I do recommend using two of these sets to secure all four of its wheels to the trailer. This tie-down kit will provide you with 4 wheel chocks and 2 ratchet tie-down straps for securing 2 wheels. The ratchet straps feature E-track fittings that will...
view full answer...
Do you have a question about this E-Track?
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Hayden R
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Randel S.
1/27/2022
No Problems, Great product