Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
Question:
Hello, I have a 28 foot RNR aluminum deck open car hauler and was looking at mounting Etrack to add tie down versatility. I was reviewing the qanda and see there are 2 different answers for mounting to an aluminum trailer. 1 uses backing plates through the decking and the other suggests mounting to the cross beams. The trailer has D Rings with backing plates presently. The E Track will be used for securing one end of a small car when Im towing 2 cars. The heaviest car is less than 3000lbs, and will be tied down using Etrack on end end and the d rings on the other.. It will also be used for odd shaped lighter items, scooters, golf carts, etc. what is the recommended mounting method for Max strength, and if backing plates are to be used, what is the recommended spacing interval? Thanks !
asked by: Joe O
Expert Reply:
For maximum strength of mounting E-tracks to an aluminum trailer bed you really want to go down to the frame of the trailer. I am sure the aluminum bed of your trailer is pretty strong since it is car hauler but the frame will definitely be the strongest attachment method.
You can also try contacting the manufacturer of the trailer to see what they would recommend as well.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: Erickson E Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Shop: RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Aluminum - 2.6 Cu Ft - Silver
- Q&A: Installing E-Track on an Aluminum Trailer
- Search Results: e track
- Search Results: e track
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Q&A: Hardware Recommendations for Installing E-Track
- Shop: RV Interior Lighting
- Search Results: e~track
- Q&A: Can E-Track be Flush or Recess Mounted Instead of Surface Mounted
- Q&A: How is the Working Load Limit Calculated on the Erickson EM58523-09162-4?
- Q&A: Can E-Track be Installed in Car Hauler for Multiple Car Widths
- Q&A: Can E Track be Used to Secure Car in Car Hauler Trailer
- Search Results: trailer jack wheel
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: 15 in 5 on 55 rim and tire
- Video: Erickson Tie Down Straps - Trailer - EM58522 Review
- Video: etrailer Horizontal E-Track Review
- Search Results: e~track straps
- Shop: Vehicle Sway Bars
- Q&A: Corrosion Concerns When Installing E-Track On Aluminum Trailer
- Search Results: spare tire mounts
- Video: Optronics LED Trailer Clearance or Side Marker Light with Reflex Reflector Review and Installation
- Video: B&W Continuum Weight Distribution System Review
- Video: Equal-i-zer Weight Distribution Shank Review - 2013 Ford F-250
- Video: B&W Continuum Weight Distribution System Vendor Review