Superwinch S5500 Roller Hawse Fairlead Winch Review Video

The ComeUp DV-4500i Utility Winch #CU644512 would work well for you and have more than enough capacity since it has a 3,500 lb rated line pull. Which if you check out the chart I attached you will see that the amount of weight this winch can pull…

The Come Up winch #CU644512 that you referenced does have an integrated tensioner to help prevent bird nesting of the winch cable when retracting.

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

The best way to secure a vehicle to trailer is with a wheel net. This takes the guess work out of finding tie-down points on the vehicle and it's the most secure method. The easiest option would be to install e-tracks like the etrailer…

The Bulldog Winch 1.8 hp Trailer Winch w Mounting Plate, part #BDW15020 is indeed weatherproof. These winches are designed to be able to mount to a trailer and handle the weather. I also recommend using the Bulldog Winch Universal Wiring Kit, part…

I have just what you will need. I have linked an FAQ article that explains the various ways to wire a winch. You will need the second half of the page titled Option 2: Wiring the Winch to a Separate, Trailer-Mounted Battery. I have also included a…

You could use a friction sway control device like #83660 to help control the sway effects caused by passing trucks, but with a 24-foot enclosed trailer that has a lot of surface area for wind to push on, you will get much better results with a weight…

When determining the correct spring bars for your trailer you will need to take into account the weight of gear loaded behind the rear axle of the truck and the additional tongue weight loaded in the trailer. I believe bigger is better and safer so I…

I wish we had a wireless remote for that winch but at this time we do not have anything. Are you looking for an alternative winch that does have a wireless option?

The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of insufficient gauge to allow enough power to pass through to run a trailer mounted winch. The main function of that circuit would be for lighter-duty…

For your enclosed trailer the Bulldog Winch Trailer Winch part #BDW15020 would be a great option for pulling in your drag truck as it has a 4,400 lb capacity and was designed for this type of application. Or if you wanted something that would work a…

This is a great question! According to my contact at Superwinch, a jump box would give you enough power for single full-length pull with the #SW1140222. A fully charged 230-Ah motorcycle battery would do about the same.