Installation Of Roller Bunks On Karavan Boat Trailer
Question:
Im purchasing a new Karavan Boat Bunk trailer and Im going to replace the OEM bunks with your CE Smith roller bunks already on order. My question is this If the brackets are mounted vertically but the bunks cannot swivel enough to fit flush on the boat, can the brackets be mounted on an angle to compensate?
asked by: James M
Expert Reply:
If the brackets don't allow enough swivel to allow the roller bunks to fit flush on the boat, I recommend replacing the brackets with bolster brackets that will allow enough swivel like the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 # CE10000G-4. This bracket can be installed with CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4 # CE15283GA-4. You will want the proper fit for best load support and function.
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/4 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 1-1/4 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review
- Q&A: Can Roller Bunks be Used on Boat Trailer of 16 ft Sea Nyph Fishing Machine
- Q&A: Roller Bunks For Shorelander Boat Trailer And Lund Fury 1600 Aluminum Boat
- Q&A: Recommended Roller Bunks For Commercial Crab Boat 5,000-6,000 lbs
- Q&A: Roller Bunk Recommendation for 16 Ft Smoker Craft Pro-Lodge Boat Trailer
- Q&A: How Many 4 Foot Long Roller Bunks for 8 Foot Long Wood Bunk
- Shop: Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 25580
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Shop: Fifth Wheel Hitch
- Shop: Brake Controller
- Search Results: dust caps
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Article: Trailer Tire Sizing
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review