Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
(316 reviews)
Price: $60.96
In Stock
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Item # V2092SP-29
Our Price: $60.96
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (316)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2092SP-29
- Vent
- Roof Vent
- No Fan
- 14W x 14L Inch
- Tinted
- Ventline
- Manual Lift
- 4-1/2 Inch
- Plastic and Metal
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with a hand-operated crank.
Features:
- Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
- Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
- Translucent cover allows some light through
- Aerodynamic, wedge-shaped dome made of durable polypropylene
- Galvanized steel roof flange won't rust or corrode
- Snap-out screen is easy to clean
- Polar White interior trim piece (or garnish) is included
- Made in the USA
Specs:
- Included garnish fits roofs 1-7/8" to 3" thick
- Garnish leg length (depth): 2-1/8"
- Garnish color: Polar White
- Other garnish sizes are available (sold separately)
- Cover color: Smoke
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Measurement of metal lip of vent: 16-1/2" x16-1/2"
- Garnish measurements: 16" x 16"
- Vent extends above roof:
- 4-1/2" Closed
- 10-3/4" Open
- 2-Year limited warranty
Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
Installation Instructions
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Attach interior garnish piece with #8 screws.
V2092SP-29 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke - V2092SP-29
Average Customer Rating: 4.7 out of 5 stars (316 Customer Reviews)
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with a hand-operated crank.by: Ron01/09/2024
So far it's holding up with no leaks. Kind of on the flimsy side comparing to the one removed but easy to install. Couldn't use the trim ring inside but after a year still looks new and the lifting/lowering mechanism works smoothly. Overall a good price for the quality.
by: Mark12/11/2023
Purchased this because from Etrailer because they state made in USA. Nowhere is there a made in USA stamp or in print. It looks identical to the made in China ones for $[XX] cheaper on [online resale]. By the build quality I am quite sure that it is Disappointed to say the least
by: H Mackay09/05/2014
Installed this vent into my Haulmark Transport 6'x12' enclosed trailer. Installation was easy, I cut a 14.25" x 14.25" inch hole between two crossmembers in the roof and dropped it in place. Because the roof on this enclosed trailer is so thin, I used a piece of 3/8" plywood so sandwich between the interior garnish and actual vent. I cut the same size hole into the plywood and left a 2" lip all around. I use 28 #8 x 5/8" stainless screws to hold it in place, pre-drilled with 1/8" bit. I then used roofing tar to seal the vent and put masking tape all around, leave 1" from the flange to ensure good coverage. I then removed the masking tape, leaving nice clean lines. Interior garnish is held in place by #8 x 3/8" galvanized screws.
Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!
by: Doug12/27/2021
Very pleased with product and the fast cheap delivery.Also liked that the size stayed the same all these years it fit the opening of my old vent in my 1978 classic van
by: Jerry Kramer08/16/2017
My truck build; I have developed, invented, a new kind of truck cap and also wanted to provide the best venting in the industry and this is why I wanted this product. Although it is a little flimsy it is easy to install and easy to use. And it adapts well for my use. My product (I hope to have available in good stores like Etrailer by years end) is a rigid, folding, adjustable (fits most trucks), one person on & off, and easy to store when off pick up truck cap or camper. See attached photos of my prototype build. Many have inquired to use it for their pets, for camping, and many other uses.
by: Mick 04/25/2024
Arrived sooner than expected. Exactly what I ordered. Thank you!
by: BrianB.09/09/2019
Learned my lesson, not to go cheap! I bought a $20 dollar vent online less a year ago, and the Arizona heat disintegrated it. I called Noah at eTrailer and he was fast, knowledgeable, and courteous. The new vent arrived within a few days and it installed in less than and hour without a problem. Most of the work is in the prep. If you've never done this before, follow the instructions in eTrailer's video, and you won't have any problems. If you need to trim the garnish ring, I snipped it vertically at either side of the corners and then bent the plastic, snapping it like tile or drywall. Easy-Peasy! I really like the smoke tint to, I can see the sky through it. Thanks for the suggestion Noah!
by: Gregory 07/08/2023
This was an easy drop-in replacement for a broken OEM vent. Well-made, although its usable life in a high-altitude, high-UV western-Colorado environment is yet to be proven. But if anything this vent was better-made than the OEM item. I have no reservations about recommending it to other DIY RV owners.
by: Matthew02/08/2024
No more leaky roof!
by: Gary04/05/2013
Was a replacement for another ventline taken out by hail. Item was as presented, price was right shipping was prompt. Will use terai let again if need arises
by: Yvette09/26/2023
fit like a glove
by: Tom 02/22/2023
This vent was exactly what I needed. The original had been broken and the replacement from etrailer was a perfect fit and the quality was better.
Thank you etrailer
by: Paul07/28/2016
This product is a wonderful addition to our travel trailer.
Since we installed the one vent and another vent with the fan we have
not had any problems with them. Great products !!!
I would like to mention that the colored covers let in more light then
the old white cover.
Paul
7/28/2017
Great. Still looks and works like it should.
by: David09/18/2022
I used this vent to replace an older static vent in our high top camper van. The installation and instructions were OK, and the vent opening mechanism works fine. The issue is that the top cover is too flexible, and it always flapped in the wind. I purchased a replacement cover from [online company], which is thicker, stronger with more reinforcing ribs. It works fine. Overall a good product with a flimsy top cover.
by: Melvin07/24/2022
Looks terrific, as described. Only wish the done were a little less flimsy. The product fit & looks perfect however the plastic dome could have been a little thicker plastic
by: Steven H.02/15/2013
UPS has a new habit of delivering to my Post Office. So when I get there, 25 miles round trip once a week I was surprised to find your package there. So the question, why pay for UPS shipping if they are not going to deliver and it cost me additional money just to drive to the Post Office?
The product (vent) is nice, shipping could throw a piece of foam on the bottom of the box so the plastic dome does not get all marred up in the box..
Steven H.
8/16/2014
still working and traveling the country
by: Wade 08/31/2023
Great service once again, thanks!
by: Coleen S.07/09/2016
This vent was shipped fast and received within a week after. I was contacted by a customer rep to make sure I was satisfied or had any questions. Vent went in quickly and easily. Instructions were clear and I had no trouble understanding what was required. This was the first time I had done anything like this on my travel trailer and am extremely happy with the results. I would order from etrailer.com again in a heartbeat. Great product-Great customer service. Thank you, George J.
Coleen S.
7/9/2017
After 1 year I am still extremely satisfied with the vent. It is functioning as it should and I have had no problems with it at all.
by: Larry j04/07/2015
Pretty solid to be so light weight, UPS beat the hell out of it in route. If it only came with a gasket like the original I removed :-( Fit and function Good, the original lasted 19 years and the plastic dome was still in tact with no leaks, the mechanism broke. 2 Tubes of Hi quality Permatex engine sealer and I hope for the best. I would be happy for 15 years of longevity. The old sealer was petrified from the UV and heat, came off like concrete. That gasket kept it sealed....
Patrick B.
4/15/2015
RTV Silicone makes for an excellent gasket material if you are mounting flat surfaces. Follow the perimeter all the way around, encircle the hardware holes, and attach the vent. Once it cures, it creates a gasket between the two surfaces. For extra waterproofing, you can come back with silicone caulk and cover the heads of the screws and run a perimter bead around the vent.
by: Christopher 06/27/2023
Simple and low cost, does the trick!
by: Richard 08/22/2023
Good product..
by: Milton 08/24/2023
Quality product from a quality company.
by: Jake H05/01/2016
I replaced the old vent on a 1983 tent trailer. This vent is twice the size of the original one so there was some cutting and modification of my roof involved but the vent works great. I also got the loctite vent install kit that comes with the sealant and screws to install the new vent. It was a great help for a he install. My roof hasn't leaked since last year.
by: Tim S10/16/2016
Fast shipping great product, hardest part was scraping the old sealant off the roof from my original vent that broke, other than that simply screw it down and fitment was perfect
Tim S.
10/17/2017
Everything is holding up well and working great as expected.
25
316
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- Recommended Manual 14"x14" Roof Vent For 2008 Hallmark TrailerBased on the dimensions you provided for a roof vent on your 2008 Hallmark Trailer I recommend the Ventline Ventadome Trailer Roof Vent # V2092SP-28 which is a manual lift roof vent with a white lid for a 14"x14" opening. If you would prefer a smoke lid instead you can use # V2092SP-29. To complete the install I recommend the Roof Vent Installation Kit # 344270KITW.
view full answer... - Replacement Ceiling Vent for 1998 Charmac Snowmobile TrailerThe Ventline Ventadome Trailer Roof Vent # V2092SP-29 that you referenced does not include a fan. The vent itself measures 14-1/4 inches by 14-1/4 inches which is standard for trailer roof vents. The garnish around the vent is the 16 inches by 16 inches and the metal lip is 16-1/2 inches by 16-1/2 inches. If these measurents match the style of vent you have then this will work for you.
view full answer... - Recommended Roof Vent Upgrade To Replace Broken 12x12 Vent LidI have a replacement option but you are correct that we do not carry any 12x12 vent lids. The 12x12 vent lid is an odd size that is difficult to find replacement lids for so I recommend changing your vent to the more common 14x14 vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 that has easy to find replacement parts to make life easier in the future. The Ventline Ventadome # V2092SP-28 has a white lid, but if you prefer a smoke lid you can use # V2092SP-29 Installing...
view full answer... - Looking for Replacement Smoke Colored Vent Cover for Ventline # V2092SPYes! We do have a replacement vent cover for your Ventline # V2092SP, it is Ventline # BVD0449-A03. You might want to check that the vent is installed with the opening facing the rear of the what it is mounted on so the wind will not catch it. Luckily, you will not have to replace your entire vent!
view full answer... - How to Install a Trailer Roof Vent on a 5 x 8 Pace Enclosed Cargo Trailer with Sheet Aluminum RoofThe Ventadome Trailer Roof Vent, V2092SP-29, is adjustable for roof thicknesses from 1-7/8 inches to 3 inches. If your roof is thinner than this you would need to add a trim ring like a piece of 1/2 inch or 3/4 inch plywood, with a 14 x14 inch hole cut in it, to the inside of the trailer roof. This will also give you a better mounting situation for the vent. You might want to use an Installation Kit, item # 344270KITW, to complete the installation of this vent. I linked a video that you...
view full answer... - Replacement For Ventline Roof Vent With Smoke Color LidYes we do have a replacement for your 14 inch Ventline roof vent with a smoke colored lid. I'm not sure if your vent had a 12 volt fan or not so I'll go ahead and give you the options for the vent with and without the fan. - Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-34 - Ventline Ventadome Trailer Roof Vent # V2092SP-29 Both come with a garnish for 1-7/8" to 3" thick roofs, and if you also need the kit to install that the correct part is the Roof Vent Installation Kit...
view full answer... - Should Butyl Tape or Putty Be Used to Install New Trailer Roof Vent When installing a new roof vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-29 I recommend using butyl tape like what is included in the Installation Kit # 344270KITW. Butyl won't dry out over time like traditional putty and it will help to create a better seal between the vent and roof. I have attached an installation video that you can also take a look at.
view full answer... - Roof Vent Recommendation to Fit 14-1/2 inch Square OpeningA 14-1/4-inch x 14-1/4-inch rough trailer roof opening is very common and we offer a whole range of complete vent assemblies and also replacement lids and other parts for this size vent. Vents that fit this opening size are 14 x 14 size and the linked page will let you see all that we offer. These include both manual and powered types, plastic-domed vents in various colors and also metal vents. For instance, if you prefer a smoke-color manual vent you could use Ventline # V2092SP-29. If...
view full answer... - Replacement Lid For Ventline Metal Ventadome Trailer VentYes your hinge is a metal continuous hinge. Most trailer roof vents are 14-1/4" wide x 14-1/4" long. Looking at your photos it looks like you had a Ventline metal Ventadome Trailer Roof Vent like part # V2092SP-29. I recommend to use the Ventline Ventadome Trailer Roof Vent Cover part # BVD0449-A01 to replace your cover.
view full answer... - Will Ventline Ventadome Trailer Roof Vent Fit A 1992 Fleetwood Bounder?The Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29 is an industry standard size and a very popular brand. It will work on your 1992 Fleetwood Bounder. I recommend the Installation Kit # 344270KITW for this installation.
view full answer... - Replacement Trailer 14 x 14 Roof Vents and Installation KitsCamco part # CAM40148 is a smoke-color replacement vent LID ONLY that fits specific production years of Ventline and Elixir vents models. It fits Ventline vents with a continuous metal hinge that were produced before 2008 and similar Elixir brand vents produced after 1994. This hinge type is shown in the linked photo. We do also offer complete vent units that include the lid. These 14 x 14-inch complete vents are shown on the linked page. We have models without fans like # V2092SP-29 or...
view full answer...
- Can a Ventline Ventadome Trailer Roof Vent Be Left Open While TravelingI do not recommend leaving the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke Item # V2092SP-29 open during travel because the wind could damage the vent cover; this is going to be the same for any roof vent on your trailer. In most cases you'll install this so that it opens facing the rear and that's going to reduce the chances that it gets damaged, but wind can still catch it and rip it off the hinges. If you're looking for a way to keep your vent open during...
view full answer... - Vent Cover For Forest River Vengeance TrailerThere are many different replacement cover styles for vents, so you will need to determine what specific hinge style you have. I've attached a photo to assist and have linked the page to your many options. I'm not sure what you mean by frame. If you need the entire assembly, we have many options to choose from like the manual lift Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29. We also have powered fan manual lift, power fan powered lift and...
view full answer...
- Replacement Roof Vent Cover for Lid Marked AS-13M-VDO449 ANS Z26 1We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part # BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would want the part # V2092SP-28 for a white lid or part # V2092SP-29 for a smoked lid. The smoked lid would allow more light in.
view full answer...
- Roof Vent Replacement Recommendation for a Cargo TrailerThe # V2092SP-29 that you referenced has overall dimensions of 16-1/2 inches by 16-1/2 inches. This includes the metal lip around the outside of the vent. This vent is designed to fit a rough cut hole of 14-1/4 inches by 14-1/4 inches. This is a pretty standard size for a roof vent and is most likely what you have so it should work. But you will want to confirm by checking the dimensions of the roof of your cargo trailer. I attached a review video for this product for you to check out as well.
view full answer... - Replacement Bathroom Vent Lid for 2010 Keystone SprinterSeveral things will determine the correct replacement vent dome lid. The manufacturer of the vent The size of the vent The location of the lift mechanism (on the side of the vent or in the center) The configuration of the hinge, continuous, three tab, etc. Closely examine the vent and the lid, looking for the manufacturer's name or a model number. If you click the link showing our replacement lids, you can use the filters on the side of the page to narrow down the results according to...
view full answer... - Replacement Roof Vent for 1992 Palomino Filly Pop-Up CamperWe have many types of trailer roof vents and vent parts but we do not have a way to look up the vent originally installed in your 1992 Palomino Filly so I suggest confirming the dimensions. Most often square roof vents are 14 x 14-inches and fit roof openings that are generally 14-1/4 x 14-1/4. Based on photos of your pop-up that I could find it appears you do have a 14 x 14 vent so I linked for you our entire range of trailer vents in this size. We have manual vents, 12V powered vents...
view full answer... - Will a Ventline Ventadome with Fan Work Better To Pull Hot Air Out of Trailer Than Unit Without FanThe Ventline Ventadome Roof Vent with 12V Fan part # V2119-3-533 will do an excellent job of helping pull hot air of an an enclosed trailer when compared to the Ventline Ventadome Trailer Roof Vent part # V2092SP-29. In regards to power consumption, you'd need to install an auxiliary battery in order to power the fans throughout the day.
view full answer... - Replacement Parts for Ventline V2094 Powered Vent I am sorry to hear about that. We do offer a couple of replacement parts for the V2094 powered vent. The Replacement Operator, Knob and Screw item # BVD0462-00 and the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents item # BVD0215-00. If neither of these parts are what you are looking for we offer entire replacement assemblies for the V2094. The vent assembly item # V2094SP-34 in smoke and item # V2094SP-30 in white.
view full answer... - Install Kit for Trailer Roof Vent The install kit you mentioned is no longer available but we do have the LaSalle Bristol Kit # 344270KITW in White or # 344270KITB in Beige that will give you everything needed to install the Ventline Ventadome Roof Vent # V2092SP-29 that you were looking at. This kit includes two 10.1 oz tubes of sealant, a 60 foot roll of butyl tape, 8 wood screws, and 30 sheet metal screws. I have attached a sample install video that you can also check out.
view full answer... - Solution for 13-1/2" Metal Roof Vent for Enclosed TrailerI do have a solution, but we do not have any vents that will fit your dimensions. I recommend enlarging the hole slightly and installing the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal # V2110SP-24. We also have an option with a smoke lid # V2092SP-29 and white lid # V2092SP-28 available as well.
view full answer... - What Color is the Lid Of Ventline Ventadome Trailer Roof Vent V2092SP-29The lid for the Ventline Ventadome Trailer Roof Vent - Manual part # V2092SP-29 is a translucent "smoke" color. Our photos are taken in a studio with bright lights and it looks like the light was shining through the lid which made it look blue but it is black. I have attached a video for you to get a better look.
view full answer... - Will Ventline Ventadome Roof Vent Fit 14 inch by 14 inch Square Opening on TrailerThe Ventline Ventadome Trailer Roof Vent # V2092SP-29 will fit your trailer that has a 14 inch roof opening. Worst case scenario you'd have to open up the opening on your roof a little bit but even that most likely wouldn't be necessary. This vent is designed for that standard roof opening size that's between 14 and 14-1/4 inch square.
view full answer... - Replacement Vent Lids For Motorhome Bathroom And KitchenYou can use Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke. # V2092SP-29 for both your bathroom and kitchen vents. There is not a specific vent lid for 13" by 13" roof vents and this is the closest size; it is recommended to enlarge the 13" by 13" to the now standard 14" by 14" so that you will have a nice fitting lid. Then you'll need a garnish; 2-1/8" # VA0445-34, 3-1/8" # VA0445-35 or 5-1/8" # VA0445-37 depending on the thickness of your roof. I also recommend...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Written by:
Raymond P
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Adam Y
Updated by:
Isabelle B
Video Edited:
Chris R
Installed by:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug
12/28/2022
Love it ,lots of compliment’s on look being it’s a classic van. Gave lots of fellow vanners the link