Replacement Parts for Ventline V2094 Powered Vent

Question

Question:

Have a 92 Ford a with air stream camper buzzard hit vent and messed up the gears are they available? It is a ventline#v2094 with a 10 in fan blade.

asked by: Sue

0

Expert Reply:

I am sorry to hear about that. We do offer a couple of replacement parts for the V2094 powered vent. The Replacement Operator, Knob and Screw item # BVD0462-00 and the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents item # BVD0215-00. If neither of these parts are what you are looking for we offer entire replacement assemblies for the V2094. The vent assembly item # V2094SP-34 in smoke and item # V2094SP-30 in white.

expert reply by: Jerred H

0

Answer 1

The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00. It sounds like you have the older version of this vent so you would also need to upgrade the fan blade as well with part #BVD0215-00.

view full answer...

Answer 2

I do have options for you but we would not have a direct replacement for your 3,500 Lb Lippert Axle. Instead, we have the Timbren Axle-Less Trailer Suspension System part #ASR3500S05 or part #ASR3500S06 which as the title states is an axle-less…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The best place to confirm the towing capacity of your 2015 Chevy Silverado 1500 Crew Cab 4x4 with 5.3-liter V8 engine is the printed owner's manual. This will reflect the capacity of your specific pickup with the particular mix of equipment…

view full answer...

Answer 5

Hey Jay, yes the CE Smith Multi Sport Kayak Trailer part #CE48870 would work great to transport a 2024 Old Town Bigwater EPDL 132. The bunks can be moved all the way together if needed and the angle is adjustable as well so you'd be able to fit…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Steel and aluminum trailer wheels of the same size and bolt pattern will have the same rating. One is not better than the other in that regard. Aluminum is superior for corrosion resistance but tend to be more expensive. The D is not a size…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...