Hopkins Endurance, Flex-Coil Trailer Connector Adapter - 7-Way to 5-Way or 4-Way Flat with Nite-Glow

See what our Experts say about this Hopkins Trailer Wiring

• Recommended Trailer Brake Controller for 2008 Hummer H2
  Starting with the brake controller itself I recommend the Tekonsha Prodigy P2 # 90885. This is an excellent proportional controller that features an easy-to-read digital display, continuous diagnostics that will alert you to any potential issues, and 3 boost level settings so you can fine tune the trailer braking. I have attached a short video demonstration on this unit that you can check out as well. The 2008 Hummer H2 should have come equipped with a factory plug for a 7-Way connector....
  view full answer...
• Compatible Tow Dolly For A 2021 Kia Sorento
  The Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800lbs - Wide Tread # DM9713093 has ramps that will adjust to fit your 2021 Kia Sorento's tread width and comes with straps to secure it to the dolly. It has a 4-pin wiring harness so if your tow vehicle only has a 7-pin instead you can use the Hopkins Endurance, Flex-Coil Trailer Connector Adapter - 7-Way to 5-Way or 4-Way Flat with Nite-Glow Item # HM47075. Note: If your 2021 Kia Sorento is AWD you will have to have...
  view full answer...
• Will the ETBC7 Provide Reverse Lockout Functionality on 2017 Dodge Durango for Boat Trailer
  Adding a 7-way connection with the # ETBC7 Universal Installation Kit will provide you with the reverse lockout you need to make sure the brakes do not engage in reverse. Since it sounds like you have a 5-way connection on your boat trailer, you will also need an adapter like the Hopkins Endurance, Flex-Coil Trailer Connector Adapter - 7-Way to 5-Way or 4-Way Flat # HM47075. This would allow you to plug your 5-way connection from the trailer into the 7-way connection on your vehicle. Another...
  view full answer...
• 7-Way To 4-Way Adapter Recommendation For 2003 Hummer H2 Towing A Rented Trailer
  Since the owner's manual on your 2003 Hummer H2 states it has a universal 7-way connector on the back, we have an adapter that will work fine for you. I recommend the Hopkins Heavy-Duty, Coiled Trailer Connector Adapter, part # HM47075. This connects to the 7-way on your Hummer and gives you a 4-way connector to connect the trailer to. As long as the 4-way connector on the trailer you are renting has the standard 4-way flat connector attached, using the # HM47075 should take care of your...
  view full answer...
• Can a 4-Way Flat Vehicle Connector Connect to a Hopkins, Trailer Adapter 7-Way to 5 or 4-Way Flat
  Yes, you can plug a 4-way flat plug into a Hopkins Heavy-Duty, Coiled Trailer Connector Adapter - 7-Way to 5-Way Flat or 4-Way Flat, part # HM47075, as long as the 4-way flat plug on your vehicle does not have any unusual housing that might prevent the connection from being made.
  view full answer...
  
• Parts Needed To Install Tow Bar Lighting and Charge Line Kit 2013 Ford Edge
  Hopkins has a custom fit tow bar wiring kit that fits your 2013 Ford Edge with the part # HM56001 that installs by plugging inline with the taillight wiring harness. Then for a umbilical to connect from this to your RV 7-way you would want the part # HM47075 which has an extra pin you can use for the charge circuit. To then add a charge line you'd need to install the part # RM-156-25 on the Escape and then change the 4-way of the Hopkins kit to a 5-way with the part # 20017.
  view full answer...
• Length of the Hopkins Endurance, Flex-Coil Trailer Connector Adapter HM47075 Un-Stretched
  When un-stretched the Hopkins Wiring # HM47075 that you referenced measures 22 inches.
  view full answer...
• Will a 4-Pole Flat Trailer Connector also Fit this 5-Pole Flat
  Most standard 4-Pole flat connectors will fit this 5-Pole flat connector. There are quite a few options as far as adapters that you could use. I have added a link to all the 7-Pole to 4-Pole adapters we have. One in particular has both 4-Pole and 5-Pole connectors, part # 37385. We also have a coiled version of the part you were looking at, part # HM47075.
  view full answer...
• Recommended 4-Way Connection Between Towed Vehicle and Motorhome
  The only real advantage of the 4 round over the 4 flat trailer connector is the clean look of the connection point and the protection from elements when not in use. For instance the Pollak Heavy-Duty, 4-Pole, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End # PK11410 has a clean finished look on the front of a towed vehicle and will protect the connection from dirt and debris with the spring loaded cover. Many people like the connection between the motorhome using a harness...
  view full answer...
• Recommended Wiring To Tow My 2022 Hyundai Santa Fe On A Tow Dolly
  When it comes to flat towing your 2022 Hyundai on a tow dolly, most of the trailer wiring is already included with the dolly. The Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 pounds # DM9713045 has a full LED DOT lighting package which includes brake, tail, and turn signal lights So you will not need the lights working on your Santa Fe. It also has the front fender marker lights, and the license plate marker lights and has a 4-flat trailer connector. Your RV will either...
  view full answer...
• How Long is Hopkins Heavy-Duty Coiled 7-Way to 5/4-Way Adapter when Un-Stretched
  Yes, a 4-Pole can fit into a 5-Pole so this part will allow you to convert your 7-Way down to both a 5-Way and 4-Way. Un-stretched it measures approximately 22 inches.
  view full answer...
• Wiring Recommendation For Flat-Towing 2004 Toyota Tacoma To Provide Maintenance Battery Power
  In order to provide a maintenance charge to your battery on your Tacoma when it is being towed you will need a couple things. The first thing you need is to determine which pin on the 7-way at the back of your RV will provide the 12V power you need. Then you can use an adapter like part # HM47075 to attach to the 7-way on your RV. This has a 5-way on the trailer side of the adapter. You then need to find which pin on the HM47075 when plugged into the RV has the 12V power. You may need...
  view full answer...
• Recommended 7 Way to 5 Way Adapter for 2014 Ford F-250
  I have just the thing for you. Take a look at the Hopkins 7 way to 5 way adapter # HM47075. The adapter plugs into a 7-Way blade style on the truck and has a 5-Way flat at the back to plug in any trailer that uses a 5-Way flat. I have included a video review of this part for you to check out.
  view full answer...
  
• Parts Needed to Add a 7-Way Trailer Connector to a 2012 Toyota Tacoma
  To add a 7-Way trailer connector to a 2012 Toyota Tacoma you will first need to add a 4-Way using # 118496 which just plugs in line with the vehicle tail light wiring. Then you would need to use 4- and 7-Way installation kit # ETBC7. This provides the 7-Way while retaining the 4-Way as well and the accessories needed to install it. An all in one that comes with the 4-Way with tail light connections and a 7-Way ins not available. I have included some links that explain the ETBC7 installation. If...
  view full answer...
• Recommended Parts Needed To Flat-Tow 2013 Honda CR-V
  When you flat-tow your 2013 CR-V you will need 5 items. You need base plates, tow bar, safety cables, lighting for the CR-V, and most states now require a supplemental brake system. I have attached a link to a helpful article that explains flat-towing you can check out. I recommend Falcon All Terrain Tow Bar, part # RM-522. The adjustable arms on this tow bar allow you to easily attach and release your CR-V. That is the advantage over the Falcon tow bar, part # RM-520. Both of these tow...
  view full answer...
  
• Recommended 7 Way to 5 Way Adapter Plug for 2020 Nissan Pathfinder Towing Boat Trailer with 5 Way
  I recommend using the the Hopkins 7 way to 5 way adapter # HM47075. The adapter plugs into a 7-Way blade style on the truck and has a 5-Way flat at the back to plug in any trailer that uses a 5-Way flat.
  view full answer...
• Braking, Wiring, and Charge Kit for Flat Towing 2013 Ford Edge
  The best permanent install style tow bar braking system is the Demco Stay n Play part # DM86VR so you are definitely on the right track. The Hopkin lighting kit part # HM56001 installs easily as it is custom fit for your 2013 Ford Edge and doesn't require any splicing. The coiled adapter part # HM47075 and the charge kit part # RM-156-25 would be all you'd need in addition as well.
  view full answer...
• How to Make a Charge Wire for Flat Towing Vehicle with Tow Vehicle with 4-Way
  To trickle charge the battery on your vehicle you will need to use a # 37185 to convert the 4-way on your tow vehicle to a 7-way. You will need to route the purple wire of this 7-way to the positive side of your battery on your tow vehicle through a circuit breaker like part # 9510 and 10 gauge wire like part # 10-1-1. Now for an umbilical to go from the 7-way to a 5-way you will want to use the part # HM47075. You will then need to use the part # 47515 to convert the 4-way on your toad...
  view full answer...
• Custom Fit Parts Needed to Flat Tow a 2016 Chevy Equinox
  Yes we do. The Hopkins tow bar wiring kit part # HM56108 is a custom fit wiring harness for your 2016 Chevy Equinox that will allow your RV to connect to it and control the taillights. I attached an install video for you to check out as well. For an umbilical connector to go from the 4-way of this harness to the 7-way on your RV you would want the part # HM47075. You will need a few more components to flat tow your vehicle though. For a base plate kit we have the Blue Ox part # BX1689...
  view full answer...
• Recommended 7-Way to 5-Way or 4-Way Flat Adapter That Measures 3-Ft Long
  For a 7-Way to 5-Way or 4-Way Flat connector I recommend part # HM47075. This adapter will work with a 4-way or a 5-way and has Nite-Glow which lets you know you are connected and working. This has a coiled cable which measures 3-ft when stretched.
  view full answer...
• Recommend Adapter To Connect 4-way of Lighting Kit to 7-Way on 2011 Tiffin RV
  To connect the 4-way from the Tail Light Wiring Kit # RM-155 on your vehicle to the 7-way on your 2011 Tiffin RV, you will need to use the Hopkins Coiled Trailer Connector Adapter # HM47075. This adapter will plug into the 7-way round connector on your RV and provide a 4 and 5-way plug on the other end. I have linked an FAQ on flat-towing that covers all the components you will need to safely flat-tow your 2007 Jeep Wrangler.
  view full answer...
• Is there a 7-Wire Hopkins Flex-Coil Cord without Trailer Connectors Attached
  There is a 6-wire Flexo-Coil cord, # RM-1046-R, with just the wires but there is no 7-wire option. There is also a 4-wire version, # RM-1064-B. The # HM47075 cable is only going to have 5 wires inside since the one end can only be used on a 5-Way or 4-Way flat trailer connector. The wires inside the 6-wire # RM-1046-R is 14 gauge. This is not the ideal size for brake or 12 volt line. You could just use jacketed 7-wire, # DW04914-1 which has 6 wires that are 12 gauge and 1 that is 10 gauge...
  view full answer...
• Recommended Wiring Adapter For A 5 Pin Connector To A 7 Pin Round Connector
  When it comes to towing your 5 pin aluminum boat trailer with your 2009 Toyota Tacoma with a 7 pin round you need Hopkins Endurance, Flex-Coil Trailer Connector Adapter - 7-Way to 5-Way or 4-Way Flat with Nite-Glow # HM47075. The 7 pin side will plug into your vehicle and the other side will be a 5 pin which will plug into your boat trailer. The stop/tail/turn wires are 18 gauge and the ground/reverse are 16 gauge. I like this wire because the nite-glow illuminates on the taillight function...
  view full answer...
• Recommendations for a 7-Way to 4-Way Coiled Extension to Flat Tow a Jeep Liberty Behind a Motor Home
  The Hopkins Heavy-Duty, Coiled Trailer Connector Adapter, # HM47075, measures 3 feet long when stretched. This will most likely not be long enough for most flat towing applications unless the 4-Way end on the vehicle has some slack that you can pull out. You could just add a 4-pole loop, # 18045, which will provide another 60 inches of length. There is also a 48 inch loop, # 18044. A longer coiled cable is not available unless you use # RM-1064-B (8 feet long) and then wire in 4-Way flats...
  view full answer...

Do you have a question about this Trailer Wiring?