Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load.
Features:
Specs:
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
This tire strap has a built-in roller idler that makes it easier to ratchet down the strap. The roller idler allows you to move the ratchet away from your vehicle so that you can tighten down the strap without crawling under your vehicle. The spring-loaded E-track fittings on the strap ends and the roller idler easily clip into E-track anchor slots (E-track is sold separately). And the zinc-coated steel construction of the roller idler and the ratchet resists rust.
Setup is easy. One end of the ratchet strap clips into the E-track on one side of the tire, and the roller idler clips into the E-track on the other side of the tire. Then the strap is run through the roller idler, which acts as a third anchor point for the strap, and the ratchet is moved away from the tire. The other end of the strap is then clipped into the E-track. You should now have plenty of room to operate the ratchet and tigten down the strap.
Average Customer Rating: 4.8 out of 5 stars (113 Customer Reviews)
This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load.I have trailered my Motorcycle hundreds of miles, without any issues, they hold great and fit very well under the tight fenders on my spyder.
I have had several different Tie-down straps over the years. This one is the best and eaisest to use. This order is for a new trailer.
John P.
3/18/2024
Very good, the rubber blocks stay on the tires and my cars do not get loose inside the trailer. I use these with my two-car trailer.
Worked great. Very solid hold on vehicle. Rubber blocks hold strap in position over tires. Able to use this strap on lower vehicles where a tire bonnet does not work… Great product overall.
Great product. Fast shipping and easy installation. If you are tired of having to lay on your back and side your self under your car to strap it down, this is a great alternative. Ordered the EM58523 and EM19148 for my open trailer and worked perfect.
Mike L.
3/24/2018
Nice car!!
Kurt P.
3/25/2019
First off, I appreciate you following up. The Erickson Tie Down Straps works great. Even though I dont have the Chevelle anymore, but when I did use the straps , they worked great.
Great way to tie down my classic Mustang. Bought extra ones on this purchase in case one gets damaged. The etrack attachment is quick and simple. The low profile checks make positioning the car in proper position easy, no guesswork. Great service from etrailer. I have made several trailer related purchases from etrailer. Recommend them for all your trailer related needs.
Installation of the E-Track is fairly simple. Just use every available cross member and surface mount the remaining every other hole is what I could best. I doubled up close to the ends. Straps are self explanatory. Quality products.
Used for auto transport.
Thanks!
The reason I only give this product two stars is because the first time I used the straps the roller broke. Contacted etrailer and was told they would not replace item. Here is some pictures.
Bought these e track straps 1year ago. They work great. We tow high end cars like Ferrari, Maserati, we also do your every day cars. We highly recommend these straps.
I love these straps. I had to remove the rubber blocks for my application but they popped right off and can be put back on any time.
Must have for pulling cars, wont go back. These are high quality and worth it over the low end cheap stuff.
I LOVE these straps, I've used them on everything from a side by side to a 2500 truck. They're cheaper than buckets, however they work just as well. All of the parts are very good quality.
Excellent products!! Very happy with the straps.
Good quality. A little long for atv tires. Worked well.
Nice tire straps, always great service ..... thanks guys !
Great product, quick delivery. Erickson E-track Wheel Strap With Roller Idler And Ratchet. Had part of one of my straps missing. They were quick to replace the item with no problems. Great customer care service.
Thanks
Jeff F.
11/11/2017
Thanks Laura, The straps and e-track worked great. I installed them in a 28 enclosed trailer to haul my show cars.
Tying a car down by the wheels is the least-bad option I've found, and these straps are the best tool for that job.
Tying down the wheels tends to shift and loosen less during transit than tying to the frame, and I feel like it's less likely to mess with the alignment than tying to a suspension hard part.
If you have an open trailer you can stand next to rather than cramped inside while working, you'll like these even better than I do.
Anonymous
1/30/2018
First year of service has been flawless. No complaints.
Surprisingly stiff. Using these on a ramp truck using an 1/8" aluminum tread plate deck. There is a sizeable gap over the tires that I was afraid would flex when rolling a car over it. Using these tracks across that gap, I felt no flex when loading the car.
Consider me impressed. Had to make a couple custom holes to fit my framing, but nothing difficult at all to do.
Great straps, if you are strapping down a car on E track these are the best I have found. Bought some from somewhere else and they are not as good as these. Two important things to do 1 make sure the bolt is all the way tight in the shackle so it wont pinch the webbing and 2 put a wear sleeve on the webbing where it goes though the shackle as well
Searched for months trying to find a way to tie down my Goldwing Trike in its garage on wheels. Found this combination on etrailer and it works fantastic!! Safer than any other way of tie down ie, using frame or triple tree. just strap both rear wheels to e-track that is firmly mounted to your trailer and tie down the front wheel to keep it from bouncing, also. Great product.
The e-track tie downs were seriously one of the best purchases I’ve made. I have a 72 corvette that I haul to shows and other places. It’s a nightmare to try to tie it down with just straps. The e-track system made it easy. I also use it to tie down my commercial mower. I highly recommend this product
I wish I had found and installed these tie down straps originally. These tie down straps work so much better and are easy to strap the car down and go and not worry about loosening up
Bruce M.
4/23/2021
great quality product
Work great.
Products performed just like they said it would. The straps fit perfectly over my 48 Chev Sedan Delivery so I didn't have to worry about them rubbing on the whitewalls like the other style would have done. Items in stock shipped right away and company communicated when balance of order was shipped. Great customer service and products. Thank you
Marty
7/15/2016
Still great!
These work excellent for tying down racecars in the trailer. We love them because the car rides on its own suspension and we don't have to worry about bending chassis parts since this goes around the tire.
Be sure to strap them down TIGHT!!! with these so they don't slip off... you can't hurt the tire.
Do you have a question about this Car Tie Down Strap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
4/7/2024
Still working very well after a year. I did have to adjust the rubber blocks, but that is more due to the fact that mt fenders are very tight to the wheel.