Erickson E Track Tie Down Ring - 2,000 lbs
(849 reviews)
Price: $10.47
In Stock
Erickson E Track Tie Down Ring - 2,000 lbs
Item # 59147
Retail:$19.41
Our Price: $10.47
You Save: 46%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (849)
- Q & A (0)
- Videos (2)
- Photos
Erickson E-Track - 59147
- E-Track Anchor
- 2000 lbs
- Erickson
Features:
- Trailer E track Round Heavy Duty D-Ring
- 6,000-lb Capacity
- Safe Working Load Limit: 2,000 lbs
- Compatible with horizontal or vertical E track
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
59147 E-Track D-Ring, 6K Round Ring
Video of Erickson E Track Tie Down Ring - 2,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Erickson E-Track Tie Down Ring Review
Speaker 1: Today we're going to be taking a look at the Erickson E-Track Tie Down Ring, offering a 2000 pound safe working load limit, the part number is 59147.This tie down ring from Erickson is designed to give you tons of different options to get this installed at any point along your E-Track that you decide to. Whether that's going to be on the wall or on the floor it's a very sturdy ring. Offers a 2000 pound safe working load limit.Basically, comparing that to some of the other strap types with D rings and stuff, it's one of the strongest out there and available. Goes right up to the safe working load limit of your E-Track, which is also 2000 pounds.It's very easy to connect these. Not a lot of hassle associated with it. You can see the nice wide release there, that's going to be different than what you see on other ones, too.
Typically, it's just a little thin piece, but we'll press down, slide that up on the track, tilt the bottom in, and then just let it go down. You can see that gives us a nice, secure, connection point where it can easily connect either a rope, if we want to lash something down, or one of our Cam Buckle Straps, or ratchet straps, the hooks will easily connect for us.Here's a good example of one of the many ways people use a ring such as this. Basically, we're going to strap down our UTV. Of course, we'll want to do it on al four tires. We've got one of our rings behind the tire now.
We'll place one in the front side here. That will allow us to bring our strap hook down to make that connection, and then it's just a matter of tightening our strap up.Now, the standard ring isn't your only option when it comes to connection points for your E-Track. They are also going to have the polyester web style strap, this one's from Erickson, this one's from Titan. These are going to offer a D ring on the end, so you have a little bit larger area, I suppose, to where you can get connected. They're going to work with your straps, or with rope, just the same.
These offer a little bit more flexibility in angle then what we get with the ring. The area in which it connects to the trailer is a little bit different, you don't have that nice wide tab that we talk about, this goes back to the narrower tab that we discussed.The weight capacities on these are not as high as what you get out of the steel ring type. Another thing I would caution you on, with this style connector, if you're going to be pulling downward on it, you'll notice it's going to bunch up down there in the bottom, and you're going to have unnecessary stress on that top portion of the strap. You're not going to have it on the bottom, so it's not going to be as evenly distributed.I definitely think if you want to pull down, or at an angle, the ring here is a much better option to get that job done.That's going to complete our look at the Erickson E-Track Tie Down Ring, part number 59147.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
Customer Reviews
Erickson E Track Tie Down Ring - 2,000 lbs - 59147
Average Customer Rating: 4.9 out of 5 stars (849 Customer Reviews)
by: NWTARHEEL05/15/2023
The installation of the track went very well on my small utility trailer. I’ve also added 4 flush mount anchor rings, and I have additional Etrack rings on the way. I have lots of options for strapping down items. I’ll be adding sidewalls and those will get Etrack also.
by: Bill H.11/30/2016
my first time to install and use E-track and accessories and am very happy with the quality of the product. our cargo trailer is used for hauling mostly antiques and furniture we intend to use this tie off ring to connect our existing straps which do not have the required end track fittings.
the picture shows using new straps also purchased.
by: Rob R.06/04/2012
Probably overkill using 4 of these to anchor a 1,000-lb trike, Harley Heritage with Mystery Designs independent rear suspension. But, I like security! fast shipping, great prices and service from etrailer.com.
by: Rich 03/14/2024
I had to change my quantities on a couple of items and the team at E-Trailer were more than helpful and all my items were delivered on time.
by: Kevin E.07/13/2016
Very strong & secure. Has large attachment rings which makes it easier for connecting tie down straps. The cheaper ones don't.
Kevin E.
7/13/2017
Its the safest way to secure cargo.
by: Conrad 04/28/2023
I really like the E-track system. All the components that I’ve ordered and received came well packed and undamaged… even the 8’ sections of track. I’ve installed the track on the floor of my small utility trailer. I purchased the galvanized track and thru-bolted it with plenty of galvanized hardware. Very pleased with the overall quality, design, and strength of all components and plan to order more.
by: Joel04/03/2024
They look well built overall. However they came wrapped in plastic which was ripped and torn. They were scuffed up I assume in transit. Packaging could be improved.
by: Kevin 04/17/2024
Fits e track nicely
by: Jerry C03/12/2017
Thanks, helpful products for me setting up a vintage toy hauler to secure my bikes. Prompt efficient service too.
Jerry C.
3/12/2018
I appreciate the follow up. Your products continue to provide great service and give me nothing but pleasure whenever I use my vintage Penton toy hauler. Thanks again.
by: MIL-SPEC Lawn Care LLC02/02/2018
Works great, absolutely no issues with binding or loss of functionality. Used on a consistent basis in our lawn and landscape trailer.
by: Brian 07/05/2023
Will work perfectly with my e trac system to tie down my quads on my trailer.
by: Sherwood Archibald04/01/2019
This is an amazing product ease of use is beyond my wildest expectations.
by: Terry K06/14/2021
These E-tracks installed relatively easily on my new trailer using the available backing plates. Total install of 18' of track took less than 4 hours - a one man job except for the final tightening of the bolts included in the backing plate kit.
by: Micah 12/24/2023
Very please with the whole process!
by: Jim 10/25/2023
The ordering process was excellent with no surprises, They kept me informed on each step of the way until delivery. I will definitely purchase from them again.
by: RONBO02/25/2015
I've used these E-Track rings for many years on other trailers. I just bought more for my new trailer. I generally haul ATVs in my trailer and over the years had ATVs jump lose from their tie-down straps from driving on bad roads, potholes, etc. However, regardless of the hazards, I've never had an Erickson E-Track ring jumped out of the track, break, crack, etc. They are extraordinarily strong and are very easy to attach and remove.
Ronbo
3/10/2016
Thanks for the follow-up. All the products I purchased are performing wonderfully!
by: Fritz 05/25/2023
I like this tie-down for my e-trak system. Flexible placement and solid.
by: Joe M08/26/2016
Strong tie down ring for my cargo trailer. I love the e-track I put in my trailer.
Joe M.
8/26/2017
wWorks great on my track system.
by: Mr. G08/10/2020
I'm a High School Band Director who uses a trailer to get instruments from performance venue to school and back. My previous trailer didn't have any E-track hardware and I just did the best we could. There was always a great deal of shifting of equipment during transport. Now that my current trailer has E-track hardware, I can secure all of my equipment easily and quickly reorganize the entire trailer according to the job's requirements. If you've not got E-track, get it. It's more than worth it's cost in saving of time and convenience.
by: Larrie05/08/2020
The etrack and quick moving d rings matched very well with the track installed by the manufacturer of our cargo trailer. We have made several long trips hauling furniture, patio doors and windows. All track and d rings have held up well, with no distortion or failure during use.
by: Kevin 03/25/2023
For the price of each tie down.. this was a great deal!!! Very durable and stay in place very well.
by: George03/15/2018
Very happy with all the products I have ordered to complete the tie down system in my new 7 X14 enclosed trailer.The prices are fair and the products are solid. I have found that the videos are very useful. Thanks
George G.
3/15/2019
Great
by: 09/28/2021
They look nice, I thought they were made in America as the company is in Michigan but the package has Made in China on the front and back. It works but not where I thought money was going.
by: Will07/30/2019
Love these tie down connectors. Easily moved around the trailer to accommodate the load.
Will
8/1/2020
E-Tracks work very well. Have them installed on a 16 flatbed trailer and a 6x10 motorcycle trike trailer. Never had a problem with either trailer holding the load.
by: Bill R06/13/2016
I bought several items and they have surpassed my expectations. I bought the E-track, ED-track straps and E-track Tie-down rings all have worked really well. i will definitely purchase items again. Great service!
25
825
Show More Reviews
See what our Experts say about this Erickson E-Track
- Will E-Track D-Ring Fit E-Track Vertical System On Utility TrailerThe Erickson E-Track D-Ring, part # 59147, is designed to work with either the horizontal or vertical e-track system so it should work well for your system in your utility trailer. I have attached a product review video for this D-Ring you can check out.
view full answer... - Can E-Track Tie Down Rings part # 59147 Secure Straps at an AngleYes, you can have the straps pull perpendicular if they are attached to E-Track Tie Down Rings part # 59147. They can have straps pull in all angles attached to these.
view full answer... - What Size Slot is Erickson E-Track Tie Down Ring 59147 Designed to FitThe # 59147 is designed to fit E-tracks which have a length of 2.45-inches and a width of .58 inches. See attached diagram.
view full answer...
- Erickson E-Track Tie Down Rings Manufacturing LocationThe Erickson E-Track Tie Down Ring # 59147 have a 6,000 lb capacity and a 2,000 lb safe working load limit. The part is made in China to US specified standards and the company is located in Michigan.
view full answer... - Would Erickson E-Track Tie Down Ring - 2,000 lbs Item # 59147 have Enough Capacity for VehicleEach of the Erickson E-Track Tie Down Rings # 59147 that you mentioned has a 2,000 lb capacity. Since you'd use more than one to secure your vehicle you'd end up easily with enough capacity so this would be a great solution.
view full answer... - How Many Erickson E-Track Tie Down Rings # 59147 to a PackageThe Erickson E-Track Tie Down Ring # 59147 that you refererenced is sold individually.
view full answer... - Length and Width of E-Track Tie Down Anchors 59131 and 59147I went and pulled both the part # 59131 and # 59147 from our warehouse to get the dimensions you requested. The width of both measures 7/16 inch. The overall length of the part # 59131 where it clips down into the e-track is 2-13/16 inches. That portion of the # 59147 measure 2-3/4 inches.
view full answer... - E-Track D-Ring Recommendation for Securing a Jeep WranglerIndividually the Erickson E-Track Tie Down Ring # 59147 that you referenced has a safe working load limit of 2,000 lbs. With at least two of these you would have more than enough capacity for your Jeep Wrangler that weighs around 3,500 lbs. These are designed to attach to E-track like the part # E19148.
view full answer... - Anchor Recommendation for E-Track for Securing ATVFor an anchor for an E-Track setup you would want the part # 59147 as it has a high capacity. Using a strap mounted setup like the part # E59143 is an additional option but they have lower capacities and since you want to pull at an angle the O anchor would be a better option.
view full answer... - Will Hook of Erickson Ratchet Tie-Down Strap # EM78627-MS Fit Etrack Loop 59147Yes, the hooks of the Erickson Ratchet Tie-Down Strap # EM78627-MS will attach to the loops of the part # 59147 that attaches to E-track.
view full answer... - E-Track Recommendation for 7 foot by 12 foot Trailer to Secure TractorE-track would work great for securing your tractor. Since your trailer is 12 inches long you could use three sections of 4 foot long E-tracks like part # EM19147 and you'd have track that runs from front to back on your trailer floor. For a tie down anchor to fit the track we have the part # 59147 which will work well. And then for straps the I recommend a ratcheting tie-down strap like part # EM51330. This tie-down strap measures 1-1/2 inches x 15 ft, and has a working load limit of 1,300 lbs.
view full answer... - Recommended E-Track And Tie-Down Strap For Trailer To Hold MotorcycleYou can use the E-Track system mounted the width of your trailer to secure your motorcycle. For a 5 ft long track you would need part # E19148. I recommend the E-Track D-Ring, 6K Round Ring, part # 59147. This is a 6,000 lb ring with the E-Track attachment. I recommend a ratcheting tie-down strap like part # EM51330. This tie-down strap measures 1-1/2 inches x 15 ft, and has a working load lmit of 1,300 lbs. I have attached links to some product reviews you can check out.
view full answer... - Will Erickson ATV E-Track Tie-Down Kit EM09160 Work on CanAm Spyder 3-Wheel MotorcycleYes, indeed, the Erickson ATV E-Track Tie-Down Kit # EM09160 will work fine to secure your 3-wheel CanAm Spyder to your trailer's deck. The CanAm typically has a dry weight of about 900-lbs so it is well within the 1500-lb capacity for the Erickson system even when fueled. The two linked videos will give you more info. We recommend using either stainless steel or galvanized hardware to secure the four wheel chocks to you trailer's deck. These will best resist corrosion from exposure to...
view full answer... - Recommended E Track Hooks for Cargo Management with Tie-DownsFor your E-track connections, I believe you are looking for the Snap-Loc E-Track Fitting with 5/16" Diameter Hole - 1,467 lbs # SLAEAFI or the Erickson E-Track Tie Down Ring - 2,000 lbs # 59147. These will work with J style tie-downs. We also have the Erickson E-Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs # E59143. We also have tie downs with the e-track anchors integrated. I've linked the page to those options. If this isn't what you are looking for, please give me...
view full answer... - E-Track and Accessories to Transport Motorcycle in Cargo TrailerHere the e-track and e-track accessories you are going to want to accomplish what you are looking to do. We offer the e-track in 5 foot sections like # E19148 which you'd need to install where needed on your trailer, we have the e-track motorcycle chock part # 3481731 for the wheel of your bike, and then we have the anchor points part # 59147 to use ratchet straps with like # 348167.
view full answer... - Using Erickson Roller Idler Along with E-Track Tie Down Ring The Erickson E-Track Tie Down Ring # 59147 that you mentioned will work very nicely along with the Erickson Roller Idler # EM09144. This tie down ring has a Safe Working Load Limit of 2,000 pounds and a 6,000 pound capacity. As you referenced in your question, when using this with the Roller Idler that will act as an anchor point, the strap will then be fed through the ratchet and run more parallel to the E-track. This will not affect the weight capacity of the Tie Down Ring. I confirmed...
view full answer... - Can Single E-Track Run Down Center of Trailer for Securing ATVYes, if you ran a single E-track down between the wheels of your ATV like with the part # E19148 you could secure the front and rear of an ATV with it by using a tie down ring like part # 59147 and ratchet straps like # EM34423.
view full answer... - Can the Erikson E-Track System Be Used In An Aluminum Utility TrailerThe Erickson E-Track system will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals. This layer can consist of almost any material, such as wood, rubber, or plastic. When installing the E-Track system in a trailer, one thing to keep in mind is to select locations that provide structural components, such as wall studs and floor supports....
view full answer... - Securing Various Vehicles in Car Hauler Using E-TrackSince the vehicles will be of varying widths and weights, the best way to go would be to run the two parallel lengths so they's be a few inches inboard from the wheels of the narrowest vehicle and use a ratchet/axle strap type setup to secure them. For each vehicle, you'd need 4 e-track anchors, part # 59147 and 4 of the Car Tie-Down kits, part # 08504-05. The kit includes ratchet and axle straps and will work if the individual weight of each vehicle is less than 8000 lbs (which it should...
view full answer... - E-Track Cargo Control Options for Installing Shelving in 18-Foot Enclosed TrailerWe can help you with an E-Track cargo solution to allow installation of shelving on one side of your 18-foot enclosed trailer. Rather than use ceiling- and floor-mounted tracks I suggest you consider using Erickson's Vertical E-Track # E19146 along with their E-Track Wood Beam Socket # 59149 on one interior wall. You will supply and install standard 2 x 4 lumber and hardware to create the horizontal portions of the shelving using the 2 x 4s.. The advantages of this method are reduced cost...
view full answer... - Cargo Tie-Down System To Secure Speaker Equipment In Haulmark Enclosed TrailerWe have a couple different styles of E-Track systems. We offer a 5-foot track system like part # E19148 that has horizontal slots and usually installed on the floor or the inside of the walls in an enclosed trailer. We also offer a vertical E-track part # E19146 that is four feet long and used the same way. You will want to know which way you want the slots in the track to run for securing your band equipment. One great way to use different type tie-downs with the E-Track system is...
view full answer... - Using E-Tracks to Secure 6,000 Pound Tractor on TrailerThe E-Tracks we have available differ in size but they all feature the same 2,000 pound safe working load limit. In order to stay within the working limit of the tracks themselves I recommend installing shorter sections like the 2 Foot # EM59150 or 4 Foot # EM19147 for each tie-down point (4 total) on your tractor. This will give you a combined safe working load limit of 8,000 pounds and will work great with Tie Down Rings like # 59147 and Ratchet Straps like # EM78627-MS to safely secure...
view full answer... - Availability of 2-Slot E Track Horizontal Track with Black Powder Coat FinishI have a few of options for you, but this exact Erickson 2-Slot Horizontal E-Track # EM19145 isn't offered with a black powder coat finish. The Erickson Mini E-Track Plate # EM09134 is the closest option I have. It also has 2 horizontal slots and a nice matte black powder coat finish for superior corrosion resistance and adds a nice rugged look to it as well. This plate has a safe working load limit (WLL) of 800 lbs and a maximum load (break strength) of 2,400 lbs, which is much lower...
view full answer... - Recommended E-Track Mounting on Aluminum Frame TrailerThe Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive # 31071 are a good choice for your wall studs, but not for your 3/4 inch wood floors. The zinc coating on both the E-track # E19148 and the screws will prevent galvanic corrosion from the dissimilar metals of steel and aluminum. For your floors, I recommend using zinc plated screws along with locknuts to secure your bikes using backing plate # e96RR. You can obtain that hardware from your local hardware...
view full answer...
Do you have a question about this E-Track?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Kathleen M
Video Edited:
Dustin K
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Jacob W
Updated by:
Alex H
Installed by:
Cole B
Installed by:
Randy B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill H.
12/11/2017
everything is fine tie downs have worked well