California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Demco 50 degree A-frame coupler. This is a channel mount design. Now this coupler installs onto your A-frame trailer, and provides attachment points for channel mount connectors, such as Lynette rings, a clevis, or a hitch-ball coupler. This unit features a capacity of up to 14,000 pounds. It is designed for 50 degree A-frame trailers. So, you'll see the design here.Now, I'm going to take a measurement.
The distance we have from this wall to the same point on the other side, and that's going to give us a measurement of, I'm going to saw about 11-5/8 of an inch. That's the span of that opening right there. This is a standard three inch channel bracket. Outside edge to outside edge, gives a measurement of 3-11/16 of an inch. I do want to point out that you will notice that it does not have a hole for a trailer jack.It is made from a very durable steel construction.
It's got nice bracing on it. Nice consistent welds. And it's coated with a silver powder coated finish, which is going to help resist rust and corrosion. It's a bolt on, or weld on installation. You'll notice that on each side, it does have three mount holes.
These all have a diameter of 5/8 of an inch. And they're separated on center by three inches. And then the adjustment holes, right here, are separated on center by two inches. They have a diameter of 5/8 of an inch as well.From the center of the top hole, to the center of the bottom hole, that has a distance of 10 inches, again, on center. That's going to do it for today's look at the Demco 50 degree A-frame coupler.
Again, this is a channel mount design, using a standard three inch channel bracket.
Average Customer Rating: 4.8 out of 5 stars (30 Customer Reviews)
This was exactly what I needed. Our newer f-550s sit much higher than some of our older trucks making it really difficult to level off a non adjustable trailer. This was perfect I used bolts and also welded it on for extra strength. I’ve converted 3 of our older trailers using these.
Product was perfect for our customers slightly odd need of a pintle on his utility trailer. Product is very sturdy and as advertised. Fit the frame angle perfectly. My customer is very happy with his trailer and that Demco had the solution to fit his need!
For our first transaction with etrailer I cannot say enough about their speed in shipping and volume of parts. Definitely will be using etrailer again in the future very soon!
Purchased this coupler for use on a travel trailer-to-flatbed conversion. Been using it for a year now and I am extremely pleased with how it has performed and held up.
Great product, allowed me to use my ProPride 3P Hitch on a large car hauler that needed additional tongue clearance. Confidently towing every time now with my 3P Hitch!
great product and fast shipping fits perfect--thank you
Very solid product. Thick steel and good welds. The only reason I didn't give it 5 stars is the lack of a hole for a jack. That's not a deal breaker for me but might be for some. The powder coated finish is a nice feature to keep it rust-free instead of just paint like most others. It should be plenty strong enough for my skidsteer trailer.
PRODUCT JUST WHAT I NEEDED / SHIPPING DEPARTMENT NEED A LESSON ON PACKING BOXES WITH THIS KIND IF WEIGHT IN BOX.
Very good product fast service thanks etrailer excellent customer service
Great for what I need it for but only 4 starts because the welds seem to be a bit in the cold side
GREAT COUPLER. COULD GET SHIPPED BETTER LIKE A BOX THAT FITS IT INSTEAD OF A BOX WHERE YOU KNOW PART OF THE ITEM IS GOING TO POKE HUGE HOLE IN BOX
Parts were just what we ordered, and service was even better! Everything arrived even faster than I expected. Thanks!
Works gr
Quality built, fast shipping. You get what you pay for! Totally worth it!
Excellent product, arrived 1 day early.
This arrived fast! I have not installed it yet but the quality appears to be excellent.
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.