Buyers Products Coupler w/ 5-Position Adjustable Channel - Weld-On - 2" Ball - 10,000 lbs

Video Transcript for Buyers Products Adjustable Trailer Coupler - Coupler with Bracket - 3370091545 Review

Speaker 1: Today we're going to take a look at the two inch cast coupler with the five position channel. Now this cast coupler with the five position channel provide added flexibility and coupler height for leveling your trailer. Common use for this part is equipment trailers, construction trailers. It does have a maximum gross trailer weight capacity of 10,000 pounds. Now the five position channel here, you can see here, one, two, three, four, five different positions, that'll allow the height adjustability for leveling your trailer. You just simply bolt this coupler into the channel bracket to fit your needs.

The fasteners, you can see, are all included. It does offer this spring loaded auto engage latch here that'll let you quickly lock it to a hitch ball with just one hand. All you have to do is remove your safety pin right here and you can see it's a spring loaded latch. And you don't even need to open it up, all you have to do since it's spring loaded is just put it over the ball. Here's an example of a two inch hitch ball and you can see, drop right it right on to it and it will automatically lock it into place and then all you have to do is put your pin and clip back through to lock it.And then to remove it, all you have to do is just pull up on this and it'll release it right from the hitch ball.

Now you can latch this pin open for ease of uncoupling. In other words, if you just pull this all the way back there's a slot here that you can basically just put the pin right in there and it'll hold this open for making it easier to uncouple. And just pull it out and just slide your pin through to lock it into place. And snap your clip right into place just like that.Now this is made of a rugged cast steel. The two inch coupler can handle loads up to 10,000 pounds.

This is all a plain, raw finish. The ball size, 2 inch diameter. It does include these two weld on steel gussets for added support when installing the channel to your trailer. A few measurements on this. The overall height of the channel itself is going to be right at 11 and a half inches tall.

The inside width of the channel is going to be three inches so it's designed to take three inch wide couplers. And the mounting holes, center to center is going to be right at two inches. But again, you can just easily remove the fasteners and put it into whatever position you need to level your trailer when towing it. And again, just to show you, if you pop open the clip, remove the pin, got a spring loaded latch. Easy to hook up, just drop it right onto the hitch ball just like that, you're ready to go. To remove it, just pull back on it. But that should do it for the review on the two inch cast coupler with the five position channel.