Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable steel ball has a 1" diameter x 2-1/8" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, it's Brad here at Etrailer and today we're taking a look at the Curt two inch ball for a ball mount. This is gonna be for a one-inch shank and have a weight capacity of 6,000 pounds. Now when choosing a ball to hook up to your trailer and tow, you obviously wanna make sure that you have the same diameter as your coupler and this one's gonna be a two inch ball so it matches up well with our trailer that we're gonna tow today. The trailer's also rated at 5,000 pounds max capacity and this one has a 6,000 pound gross trailer weight rating. So we are totally safe there. And some of your other components that you're gonna wanna make sure match up to the trailer weight is also gonna be your ball mount, the hitch, and also the vehicle.
So check all of those. Make sure that you're not gonna be under the weight that the trailer could be. That way you're gonna stay safe. Now there's plenty of combos that you can come up with as far as your ball mount with a rise and a drop and also the ball because of the different sizes. But just make sure that the shank is gonna be the same.
So this one is a one inch shank. You're gonna wanna check your ball mount to make sure that this tightens down. And also your weight capacities need to play ball with all of the rest of the components. Now keep in mind if you're choosing a separate ball and ball mount combo you are gonna need to torque down the ball. Some of them you can get pre-torqued and that's a nice feature but the ability to get the ball that you want means that you are gonna have to take a torque wrench to this and torque it down pretty heavy.
And a lot of times you can use a bench vice. You see that there's some slats here. You can actually get a large wrench on this or you can put it in a vice. Something that I found that works really well is actually using the hitch of your vehicle and you can put a wrench here and that way your torque wrench is moving in a nice easy way. You're not having to move it this way, it just makes it a little bit easier to get this torqued.
And that's nice too. The reason they don't come pre-torqued onto these is that way you can determine if you need a rise or a drop. So if you do plan on going from the two inch drop that we have here to the three quarter inch rise you are gonna have to take this off and re-torque it down. Now if you need a torque wrench we have those available here at Etrailer. You can generally rent them at an auto parts store. Check the torque setting on the ball. It is relatively high, so make sure you have a torque wrench that can go up that high. Now something else to kind of keep in mind if you're using a ball mount this shank length is definitely perfect for a normal size ball mount. But if you are doing any bumper towing, sometimes you will need that longer shank. So that's something to keep in mind. That way it passes all the way down through your bumper. So this again, for most ball mounts this is gonna work great. So once you've determined the right ball mount and ball combination for your trailer, all that's left to do is get that ball torque down your pin and clip in place and then we can start hooking up our trailer and the remaining components. That was a look at the Curt two inch ball mount with a 6,000 pound capacity and a one inch diameter shank.
Average Customer Rating: 4.9 out of 5 stars (3551 Customer Reviews)
Durable steel ball has a 1" diameter x 2-1/8" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.Worked like a charm and the team at trailer was very helpful in finding the right solution. Traveled across the country hauling a trailer with my SUV and this fit perfectly.
Just what I needed for the new receiver thank you for the fair shipping
Looks like a good quality tow ball. I'll never be able to tell you though. I cut the shank off to build my own trailer coupler lock for cheaper than a purpose built coupler lock. This ball plus the e98883 coupler pin lock makes my trailers secure in my yard as well as anywhere we go. And by buying enough keyed-alike coupler pin locks, one key fits all trailers unlike previous setups I tried where each coupler lock had its own key.
Fit and finish is as expected. It's new and I can't comment on how the chrome finish will hold up . Threads are clean and the nut goes on smoothly. Chrome lock washer compressed nicely with no chrome flaking.
This pic makes the ball look like it's not chrome,,,, it is actually very shiny chrome and fit my setup great for my 2008 Honda Element SC
These are a great replacement for all our trailers and vans pulling double.
Shipping was on time at great price.
Excellent quality. Exactly what I'd expect from etrailer
I am very pleased. The guides arrived very quickly -like two days -and were easy to install.
I have ordered everything for my used trailer including spare tire, trailer hitch receiver and the ball mount. The ball mount gave me an 8in rise which is what I needed for my Toyota Tacoma.
Etrailer follows up and does a great job.
Exactly what I expected.
Works great, and the low profile keeps it out of the way. The adaptor cable made it plug and play for my 2021 Nissan Frontier.
Everything still works a year later and quality is holding up.
I am BEYOND impressed with etrailer's customer service. Both at the date of purchase and now reaching out a year later. I’ll never buy anything for a trailer anywhere but etrailer.
Towing a 20Ft. Ranger Bass Rig with no issues after 1 year. Strong Hitch and
Ball.
Purchased trailer hitch, ball, and lock pin. Needed a 9 1/4 " drop. etrailer had the parts in stock at competitive prices. ordered on a Sunday arrived Wed noon. Great response time on any items I have ever ordered. I like these folks!
Items arrived quickly. For those using the Curt C45070 ball mount on a Toyota Sienna (2013), flipped over for rise, there is about 3/4 clearance between the bumper cover and the reinforcement web on the back of the ball mount.
this product is to large for the hitch. needs 3/4in dia shank.
Amazing service- got notification it had shipped a couple hours after I ordered it Crazy good You have set the bar high for your competition!
Installed this using an impact wrench. No problems.
Ben L.
4/2/2018
Holding up well
Drawtite trailer hitch was easy, one person install
great product. my new frontier came with a hitch with no ball. this is the 2" ball I was looking for, tightened it to 250 and now I am ready. fast delivery, good quality and great price.
Nice trailer hitch ball. Less than big box store price and name brand rather than nameless.
George and the team at etrailer did a fantastic job getting me this hitch ball - in time to take the boat and enjoy the weekend. OUTSTANDING SERVICE!! Nicely done! Thanks. Kurt
Bought a number of Items to add a trailer hook up to my 2017 Nissan quest. Jason was very helpful with all the different Items I purchased. i recommend buying from etrailer.
Too large to fit in the above drawbar
Sierra K.
9/10/2021
Thank you for your review. The ball mount you ordered, Item # 3605336053, has a ball hole diameter of 3 quarter inch. Whereas, the hitch ball you ordered, Item # C40004, has a shank dimension of 1 inch diameter. The hitch ball you needed is here: Item # C40018.
Once again great products and services are just a call away!!!
The reviews tell you just how everything is going to work for you before you buy.
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
6/19/2018
For the same sized ball with a 3/4 inch diameter shank thats 2-1/8 inches in length, youd want to use # A-82.