Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity
(43 reviews)
Price: $84.24
In Stock
Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity
Item # BD500212
Retail:$101.26
Our Price: $84.24
You Save: 17%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (43)
- Q & A (0)
- Photos
Bulldog Accessories and Parts - BD500212
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gears
- Bulldog
Replaces the gears for your Bulldog square-tube jacks with 12,000-lb static weight capacity (BD182800, BD182804, BD182805, BD182815, BD182300, BD182304, BD182400, BD182404, BD182411, BD182415, BD182500, or BD182524).
Features:
- Replaces the gears for your Bulldog square-tube jacks with 12,000-lb static weight capacity
- BD182800, BD182804, BD182805, BD182815, BD182300, BD182304, BD182400, BD182404, BD182411, BD182415, BD182500, or BD182524
- Includes all that you need to replace or repair gears
Specs:
- Large gear dimensions:
- Height: 1.43"
- Outer diameter: 3.42"
- Inner diameter: 0.875"
- Small gear dimensions:
- Height: 1.25"
- Outer diameter: 2.50"
- Inner diameter: 1.00"
- Two hex nuts/washers dimensions:
- Height: 0.50"
- Outer diameter: 1.5"
- Inner diameter: 1.00"
- Washer dimensions:
- Outer diameter: 1.75"
- Inner diameter: 0.875"
- Long roll pin dimensions:
- Length: 1.50"
- Diameter: 0.30"
- Short roll pin dimensions:
- Length: 1.25"
- Diameter: 0.25"
- Spring dimensions:
- Length: 4.47"
- Large end outer diameter: 1.45"
- Tapered end outer diameter: 1.17"
- Inner diameter: 1.00"
Fits:
- Bulldog jacks with 12,000-lb static weight capacity: BD182800, BD182804, BD182805, BD182815, BD182300, BD182304, BD182400, BD182404, BD182411, BD182415, BD182500, and BD182524
500212 Replacement Gear Kit for Bull Dog - 12,000 lbs
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity - BD500212
Average Customer Rating: 4.9 out of 5 stars (43 Customer Reviews)
Replaces the gears for your Bulldog square-tube jacks with 12,000-lb static weight capacity (BD182800, BD182804, BD182805, BD182815, BD182300, BD182304, BD182400, BD182404, BD182411, BD182415, BD182500, or BD182524).by: Tyson01/13/2024
Fast shipping and good communications. etrailer has constantly delivered with all parts ordered and the one and only time there was damage to an item ordered, they sent me a new one next day. Awesome outfit to deal with.
by: Glyn H.03/08/2018
These parts were a great time and money saver. The tongue jack on this trailer was welded to the trailer cross member by the trailer manufacture, so removing the old jack and welding on a new one was going to be expensive and time consuming; plus the trailer would be out of service for a couple of weeks. With the parts to rebuild the jack, we did the repair in less than two hours. As a bonus, the parts actually arrived two days sooner than promised. Thank you etrailer.com for the great service.
by: Jason 01/18/2024
Parts came in a timely manner and were just what we needed. One year later and still going strong
by: Jason09/03/2019
Went to drop my gooseneck horse trailer after use and no-go! Apparently the screw jack became stripped over the years and needed to be replaced. The hardest thing about this project was removing the entire unit from beneath as shown in the pictures. For clearance I had to not only drive the rear wheels onto small ramps but also dig beneath the jack to drop everything out. Everything fit perfectly. The video was great at explaining things. Brendan gave me a few shipping options and items arrived promptly without breaking the bank.
by: Douglas 01/05/2023
Just what we needed! Worked perfectly.
Thank you etrailer!
by: Wesley 06/01/2020
Exact fit parts. Instructions were helpful as were the available videos. Works much better and easier now. The original bulldog hitch worked for almost 20 years.
by: William02/25/2023
It all was great but the shipping took forever, my fault I chose basic but damn that took long!! I just order the rod bc that ended up being the real problem and used priority shipping and you tell me how long it will take?
by: Scott04/17/2020
Did not know the make of the landing gear as all tags were removed when builder painted trailer. James with etrailer was very helpful in figuring out what was needed and the parts are are a perfect replacement for the damaged parts. Parts look to be well made and should last for many years. Thanks James and etrailer for the help.
by: Ken07/17/2018
Product was delivered quickly and was exactly what we were after. Turns out the kit covered several different versions of the jack assembly, but only minor modification (drilling out the pin hole in the cross shaft) was required for the included parts to drop into place. Great service, great product!!
by: Mike 01/06/2023
recieved product in short amount of time and correct. excellent service
by: Sherry05/04/2019
I had questions if my old jack could be converted to electric and Conner answered
Immediately with how and the part number needed, these folks are spot on.
by: RON F06/22/2017
I RECIVED MY ORDER IN A TIMELY. MANER PARTS WERE WHAT I WANTED. THEY WORKED GREAT. I WOOD BUY FROM ETRAILER ALLWAYS
by: Bernadetee12/07/2019
Had just what I needed at a good price. It shipped immediately . . .and my trailer is back in business.
by: Eric 02/09/2023
Great product and great service
by: bruno08/16/2017
prompt delivery. Still waiting for customer to come in for installation.
by: AJ04/14/2021
Exact replacement
by: Bill V07/07/2015
Excellent Product. Very fast shipping. I will buy from etrailer again.
by: Donald 06/18/2020
Parts worked out great. Jack back in se rvice.
by: David08/15/2018
Great service great parts
by: Joe C.01/25/2018
Product worked exactly as described. I am very pleased, and it has saved my back.
by: Ernest C.09/26/2014
Website was great. Easy to use and full of useful information. Processing was quick and order arrived promptly. I was kept informed all the way through. Will definitely reuse and recommend.
by: Michael01/22/2020
Great products. Other than a hard time driving out the old pin from sprocket, all parts assembled daily. Better than cutting of old assembly and welding new one one.
by: Perry 03/06/2021
by: Frank04/25/2018
gears were right from casting ,should have been had the gear teeth cleaned and machined smooth. thank you for all the help.
25
43
Show More Reviews
See what our Experts say about this Bulldog Accessories and Parts
- Can a Manual Raise/Lower Trailer Jack Be Converted to Be Used With a Drill The only jack that can be converted to be used with a drill would be the Bulldog single speed jacks with a 12K capacity. If you have this jack then you'd just need the conversion kit # BD1824200100 and the gear kit # BD500212. Otherwise, you'd need to just replace the jack with one that can be used with a drill like the Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option # TV94FR.
view full answer... - Instructions for Disassembling a 12,000 lb Bulldog JackI attached a picture that details how to disassemble the Bulldog 12,000 lb jacks.
view full answer...
- Can The Bulldog Square Jack, # BD182500, Be Rebuilt And Are Replacement Parts AvailableWe do sell replacement parts for the Bulldog Square Jack - Fixed Leg - Sidewind, # BD182500. We have the Bulldog Replacement Sidewind Gears, # BD500212, which are the gears located at the top of the jack that the sidewind crank would be connected to. We have a replacement nut and screw repair kit that is for the nut and screw that is located at the bottom of the jack. This is the screw that will raise and lower the leg. The available kit is for jacks manufactured after 2003. The part...
view full answer... - Trying to Get Inner Drop Leg of Bulldog Jack to Move After Getting Stuck All the Way DownSounds like it's binding up in some way. I would try jacking the trailer up and see if that puts enough force on the drop leg that it frees itself up and allows the pin to drop into a hole again.
view full answer... - Recommended Replacement Gears for a 015796 Hammerblow 180 Series Jack It's most likely not that spring and instead a gear issue. The fact that it is slipping or starting to means the teeth on the gears have been worn down. The grinding feeling means it's getting worse. Like you said the trailer's getting up there in years. The 015796 Hammerblow 180 series have been discontinued for quite awhile but we do offer the Replacement Gear Kit for Bulldog Sidewind Jacks item # BD500212.
view full answer... - Replacement Gears for Bulldog 10K Square Jack 182417Thanks for reaching out! To replace the inner gears of your Bulldog square jack you need the Bulldog Replacement Gear Kit # BD500212 which I confirmed with my contact at Bulldog will work for your 182417 jack. I've attached a few videos for you to check out as well.
view full answer... - Replacement Repair Parts for 5th Wheel Landing Gear & Replacement Landing Gear SetsSince trailer makers don't maintain spec on the jacks they install (especially for a 5th wheel that is close to 17 years old) you'll want to check the jack for any part numbers to help you choose the correct repair kit. We do have bevel gear repair kits for jacks and landing gear from most major makers including Atwood, Stromberg Carlson, Fulton and others. In some cases repair kits for one brand will work fine for another since many of these products do share a common manufacturing origin,...
view full answer... - Replacement Gears for 12,000 lb Leg from Unknown BrandThe Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity # BD500212 are not a confirmed fit for all 12K legs. I've attached a photo with measurements to help you determine if this gear kit will work for your application. The Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR is another option. On this kit the taller gear has an inner diameter of 1-3/4 inches and an outside diameter of 2-1/2 inches. The shorter/wider gear has...
view full answer...
- Bulldog Jack Gear Compatibility With Stallion Brand Jack And Electric Conversion KitThe Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity # BD1824200100 will allow a single speed jack with 12K capacity to become a powered drive jack. The Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity # BD500212 may work with your Stallion brand spring loaded drop leg jack, but I can't confirm it will work without replacing the screw and nut kit # BD500217. I know customers have changed this screw and nut assembly on a stallion jack without...
view full answer... - Which Replacement Screw And Gear Kit For Older Bulldog 180 Series Jack?We have exactly what you are looking for. For your older Bulldog 180 series jack you will need the Replacement Screw and Nut Kit for 12000-lb Capacity Bulldog Jacks # BD500217, and Replacement Gear Kit for Bulldog Sidewind Jacks # BD500212. You will need grease for the new gears so if you do not already have some I recommend using the LubriMatic Multi-Purpose Lithium Grease # L11316. I included videos for the products mentioned for you to take a look at.
view full answer... - Gear Set and Replacement Spring for Bulldog 180 Series Sidewind JackHey Tyson, it looks like the kit you are needing is the part # BD500212 which is a gear set for your Bulldog 180 series jack that comes with the spring as well.
view full answer... - Does Replacement Gear Kit BD500212 Fit 3-Car Trailer JackThe Bulldog Replacement Gear Kit # BD500212 will not fit a 3-car trailer jack; this kit is only a direct replacement for Bulldog sidewind jacks with a 12,000 lb capacity. I have added a link below to our entire selection of replacement gears for trailer jacks, though you will need to know the model and capacity of your jack to ensure you get the right replacement.
view full answer... - What is the Inner Diameter of Replacement Bearing for Bulldog Square Jacks, # BD001015I spoke with my contact at Bulldog regarding the Replacement Bearing for Bulldog Square Jacks, # BD001015. He stated that the inside diameter is 0.876 inches. This is 1 thousand of an inch larger than 7/8 inches. The outer diameter is 2 inches. We carry several other replacement gears for Bulldog jacks including # BD500106, # BD5002581360, # BD500156, and # BD500212.
view full answer... - Are the Spring Returns of Bulldog Jacks Repairable if the Spring Return Function Stops WorkingIt sounds like you have a spring return Bulldog landing gear jack that has a broken spring and now won't retract when you activate the release lever. I spoke to my contact at Bulldog and he said the springs aren't repairable so you would need to replace the jack with something like the part # BD182701.
view full answer... - Gear Replacement for Bulldog Trailer Jack BD182404Could you get me the brand of the jack possibly?
view full answer... - Can a 10K Bulldog Drop Leg Trailer Jack be Trimmed to be ShorterThe issue is that there is a screw inside the jack that turns in either direct to raise or lower the jack. It threads through a fixed nut. At the very top of the screw the threads are all mashed up so that the leg can't just fall out. Basically there isn't a way to take the legs out without having to cut open the jack and then it is pretty much useless because it will have lost its capacity. Could you go with a 7,200 pound jack? Drop leg jack # BD180354 is rated for 7,200 pounds at will...
view full answer... - Replacement Screw for Bulldog 12K Jack with 1 Inch Diameter RodIt doesn't sound like you have a 12K Bulldog Trailer Jack as they all used a 1-1/4" diameter threaded rod both pre-2003 and post-2003. Please keep in mind that the rod is measured by the threaded portion. If you can confirm the threaded rod is measured correctly then you would need to look for other identifying marks on the jack. If none are present then the only option I have for you is a full replacement like the Bulldog Square Jack part # BD182701 which has a 12,500 lb capacity and offers...
view full answer... - How to Install the Replacement Gear Kit # BD500212There is an initial pin that holds the shaft at the top of the jack into place. You will simply need to use a flat head screwdriver to compress the spring that is covering up that pin and the pin should fall right out. From there it is just a matter of pulling the internal gears and equipment out so that you can replace it with the Replacement Gear Kit # BD500212. I have attached a video of this process being done that you can use as a reference. This will then enable you to install the...
view full answer... - Repair Kit for 12000-lb-Rated Bulldog Square Tube JackThe Bulldog Replacement Sidewind Gear Kit # BD500212 that you referenced is the correct repair kit for your Bulldog square tube jack according to my contact at Bulldog. The top cap you can use is part # BD017802. After you repair the jack you will want to apply some general purpose grease and extend and retract the jack fully a time or two to distribute the grease before installing the new top cap.
view full answer... - Heavy-Duty 12000 lb Bulldog Jack Replacement Cross Shaft and Bushings RecommendationI have an option for you, but I spoke to my contact at Bulldog to try and get a replacement cross shaft for you and he said they are not available. He said that you will just need to get a 12 inch long section of 1 inch cold rolled steel and then drill a .4 of an inch on either end of the rod 1-1/4 from the ends and then a 1/4 inch hole near the middle of the shaft but not completely centered. To get an idea what I am talking about check out the picture I attached. The Replacement Bulldog...
view full answer...
- Inside and Outside Diameters of Bulldog # BD500212 Replacement Gear SetThe # BD500212 Bulldog Replacement Sidewind Jack Gears are compatible with Bulldog-branded sidewind 12K capacity jacks. The larger of the two gears has an OD of 3.42 inches and an ID of .875. The smaller gear has an OD of 2.50 inches and an ID of 1 inch.
view full answer...
- Correct Replacement Motor for a Bulldog 12K JackIt sounds like either the motor is shot or the gears are worn. You're going to want to test the voltage of the motor first before deciding to replace it. If your motor is not getting enough voltage then you're just going to need to replace it with the Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity # BD1824200100. This kit is going to include the powered-drive assembly, the torque stop tube with energy absorber, a terminal box, a wiring harness and switch box, a...
view full answer...
- Can Bulldog 12,000lb Trailer Jack Be Adapted To Be Raised/Lowered With Electric Impact?I have a different option for you, but there is no such adapter for raising and lowering your Bulldog 12,000lb trailer jack with an electric impact. The only non-manual option offered is the Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity # BD1824200100. If your Bulldog jack was made before 2003 you will also need gear kit # BD500212. I included an install video of the # BD1824200100 for you to take a look at.
view full answer... - Replacement Gear Kit for Ram Jack With 12,000 lb CapacityThe # BD500212 is specifically made for Bulldog jacks. Based on the 12,000 lb capacity and 10,000 lb lift on your Ram jack it sounds like you have a TJD-12000 series jack like the # TJD-12000SP-F2. The correct gear kit would be the # TJD-12000-GR. If you need additional replacement parts we have the following: -Replacement Sidewind Crank for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs # TJD-12000-HD -Replacement Handle Shaft for etrailer and Ram Square, Direct Weld Jacks -...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Rachael H
Updated by:
Wilson B
Installed by:
Randy B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Perry
3/11/2022
Excellent...no issues what so ever