Deka Ring Terminal - 22-18 Gauge - 10 Stud Size - Heat Shrinkable - Red - Qty 1
(7 reviews)
Price: $1.17
In Stock
Deka Ring Terminal - 22-18 Gauge - 10 Stud Size - Heat Shrinkable - Red - Qty 1
Item # DW05736-1
Our Price: $1.17
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Videos (1)
- Photos
Deka Wiring - DW05736-1
- Wire Connectors
- Ring Terminals
- 22-18 Gauge
- Deka
- Size 10
This red ring terminal fits 22-18 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.
Features:
- Fits 22-18 gauge wire
- Heat-shrinkable nylon insulation allows for adjustability and provides durability
- Red
- Quantity: 1 ring terminal
- 1-Year limited warranty
05736-1 Deka Ring Terminal - 22-18 Gauge - 10 Stud Size - Heat Shrinkable - Red - Qty 1
California residents: click here
Video of Deka Ring Terminal - 22-18 Gauge - 10 Stud Size - Heat Shrinkable - Red - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Deka Wiring - Wire Connectors - Ring Terminal - DW05736-1
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Deka 22 Gauge and 18 Gauge Ring Terminal with the number 10 Ring Size and the red heat shrink nylon insulation. It is for a quantity of one terminal. Now this red ring terminal is designed to fit on the end of a 22 to 18 gauge wire size, and it fits on the stud size of number 10. The red heat shrink nylon insulation allows for adjustability and provides durability when you're connecting the wire to the terminal.
And the red color on the vinyl indicates that it fits a 22 to 18 gauge size wire. Now these terminals are also available in other sizes that'll fit larger gauge wires, like a 16 to 14 gauge and a 12 to 10 gauge wire, and also other stud or screw sizes. In wires, if you're familiar, the larger the gauge number means the smaller the wire size. But that should do it for the review on the Deka 22 Gauge and 18 Gauge Ring Terminal with the number 10 Ring Size and the red heat shrink nylon insulation.
Customer Reviews
Deka Ring Terminal - 22-18 Gauge - 10 Stud Size - Heat Shrinkable - Red - Qty 1 - DW05736-1
Average Customer Rating: 4.7 out of 5 stars (7 Customer Reviews)
This red ring terminal fits 22-18 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.by: Bruce04/29/2017
Order was complete and delivered in a timely manner. Only problem (minor) was the 7way pigtail was not wired to color code. Had to use test light to get 3 of the wires in correct location. Could be a problem if someone wasn't comfortable with ringing out wires.
by: Dave09/22/2015
This was my third order from etrailer, the quality and pricing keeps bringing me back. On this last order there was a hiccup but etrailer addressed the issue ASAP and stood behind their product. I plan to place another order for brakes and tires this week. So far, so good.
by: Rick01/27/2021
They hold great and are water tight.
by: Thomas09/04/2020
Works well
by: Christopher07/19/2018
Good product
by: Patrick 10/21/2021
by: Richard 06/21/2021
7
7
See what our Experts say about this Deka Wiring
- How to Install the Peak Backup Camera Part # PKCOBU7 on a Horse TrailerThe first step for installing the Peak Backup Camera Part # PKCOBU7 would be to mount the rear-view camera somewhere inside the horse trailer. You can use the Self-Tapping Fasteners for License Plates and License Plate Frames part # CR80430 to install the bracket/camera. Once the camera is in position, you will have two wires to connect. One will be red for the 12-volt power and the other will be black for the ground. Strip about 1/4" of the jacket off of each wire. Once done you will...
view full answer... - Installing 4-Pole Trailer Connector on 2009 Lexus RX350 With Factory Tow PackageSince the tow package connector on your RX350 doesn't have a white ground wire, you'd install the # 18002 4-pole connector as follows: You'll cut off the existing plug on the tow package harness on the vehicle. Green tow package wire connects to green 4-pole wire Yellow tow package wire connects to yellow 4-pole wire Brown tow package wire connects to brown 4-pole wire White 4 pole wire could connect to the frame of the vehicle, using a ring terminal like # DW05736-1 and a self tapping...
view full answer... - Recommended 4-Way Trailer Wiring Harness For Adding New LED Lights To Vintage TrailerTo wire the 4 clearance lights # MCL0040ABB, license plate light # M298C, and tail lights # STL190RB to your 12' long 75" wide vintage trailer, I recommend starting the 4-Way Wishbone Trailer Wiring Harness with 42" Ground Wire # A40W42B which is 40' long meaning you will have enough extra wire to connect all of the lights you are planning on adding. The # A40W42B will install as follows: Brown wire to each of the yellow wire on each of the # MCL0040ABB, to the brown wire on the # M298C,...
view full answer... - How To Wire In The V-Shaped Identification Light Bar When Replacing Light With Only 1 WireSince your old V-bar light only uses a single wire it grounds the light through the mounting hardware. You will simply need to add a Ring Terminal # DW05736-1 to the ground wire on the V-Shaped Identification Light Bar # TN23MR. Then you will be able to ground this wire to the trailer frame.
view full answer...
Do you have a question about this Wiring?
Info for this part was:
Written by:
DeAnne T
Installed by:
Jeff D
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.