Thinline LED Clearance and Side Marker Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens
(1693 reviews)
Price: $11.29
Thinline LED Clearance and Side Marker Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens
Item # MCL-91RK
Retail:$21.81
Our Price: $11.29
You Save: 48%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (1693)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL-91RK
- Clearance Lights
- Rectangle
- LED Light
- Red
- 2-1/2L x 1W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
2-1/2" x 1-3/16" Rectangle. Waterproof, LED trailer light serves as a side marker or clearance light when properly mounted. Chrome housing provides a finished look. Surface mount to trailer - hardware inclued. 1-Wire design. PC rated.
Features:
- LED trailer light functions as a clearance light or side marker when properly mounted
- Thinline Series has a low profile so that light can fit in tight spaces
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Chrome housing provides a finished look
- Red lens over white LEDs
- Compatible with 12V DC electrical systems
- Surface mount to trailer with included hardware
- Single wire design grounds through mounting hardware
- DOT compliant
- PC rated
Specs:
- Dimensions: 2-1/2" long x 1-3/16" tall x 7/8" thick
- Distance between mounting holes (center on center) 2"
- Diodes: 3
- Power draw at 12.8V: 0.051 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
MCL91RK Optronics Mini Thinline 12V LED Clearance and Side Marker Trailer Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens - PC Rated
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Thinline LED Clearance and Side Marker Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens - MCL-91RK
Average Customer Rating: 4.8 out of 5 stars (1693 Customer Reviews)
2-1/2" x 1-3/16" Rectangle. Waterproof, LED trailer light serves as a side marker or clearance light when properly mounted. Chrome housing provides a finished look. Surface mount to trailer - hardware inclued. 1-Wire design. PC rated.by: Robin 02/17/2023
I was very impressed with your customer service! I wasn't sure what to even call the part I was looking for but Conner Lund answered my confused email the next day and sent me a link to exactly what I needed. I ordered the lights the same day and they came today, 2 days later! It doesn't get much better than that! So thanks for everything. You guys are great!
by: Alan 02/05/2024
Easy to install. Bright LEDs look great on my trailer.
by: Mike 04/17/2024
Just what I ordered
by: Meade02/28/2023
Very difficult to install....the positive wire breaks off when installing the actual led into the base...I had to solder the wire back onto the connector...no fun...but in the end..success
by: Rick07/23/2018
Good quality lights, installed easily enough. I used #8x3/4" flat head, self tapping screws as I thought the ones include were a bit too small. Be sure to drill the hole that your power wire runs through at an over size. Otherwise the power connector on the back of the light can ground out on the trailer frame, shorting out everything or over heating your wiring.
by: Rick B02/04/2017
Very happy with the lights I purchased. Being LED they are quit a bit brighter then the old ones that came with the trailer. Was very happy with Etrailer in the quality of the product and the quick turn around.
by: David12/19/2021
These lights are well made and look great. They are a direct replacement for the older version I have. Tinted them to match the trailer. They were very easy to tint as the light surface is very flat.
by: George M.07/31/2014
Terrible push in connection. Had to use heat shrink to keep in place and protect. Very bright but I would purchase different item based on the connection.
by: Jim B07/09/2016
A very bright LED marker light for my boat trailer.
by: Brad S10/16/2016
Great products! Fast shipping. Very satisfied. I have already installed them on my trailer. Thanks again
by: Jacob 03/04/2021
Very bright and submersible! Mounted on PWC trailer.
by: BZ02/12/2015
Brighter than old incandescent lights. Easy to install and all hardware was included. Sealed and submersible for marine trailer use.
by: Bill H.04/29/2016
Great service and delivery. I was amazed at the assortment available. If you can't find it here you probably don't need it. I will recommend this site to anybody needing trailer components.
by: Ryan 07/12/2016
Nice led lights look great
by: Les12/13/2018
Great service and prompt delivery
Les
12/14/2019
Lower current draw and great visibility - love led lighting!!!
by: Nick Schwartz 08/21/2015
These folks have the knowledge and expertise with great prices. They take the time to explain too. Like to see free shipping on the lower price items or coupons if possible. Will use again.
by: DerekB05/18/2019
Easy install, much brighter than the old lights.
by: stephen08/07/2015
finding parts was a snap, replied to order immediately, tracking package was effortless arrived on time in excellant condition.
thanks
steve F.
by: Steven04/05/2018
Really great product. They make a good upgrade.
by: Dale08/31/2019
Quick safe shipping and just what I needed, thanks for being the lowest cost.
by: Mike04/09/2019
Good price, good quality
by: Robertwilliams07/06/2018
Having no problem with product.
by: Frank K.07/10/2016
Great Product . TY .
by: Mike03/11/2018
Works great
by: Greg07/28/2015
Lights were easy to install and really bright.
25
1497
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Boat Trailer Market Light Replacement Recommendation for Chaparral Boat TrailerThanks for the picture of the light you are looking to replace. It looks like our closest replacement is the part # MCL-91RK which has the chrome base like what yours has.
view full answer... - What is the Mounting Hole Spacing for Mini Thin Line Sealed LED Marker/Clearance Light # MCL-91RKOn the Mini Thin Line Sealed LED Marker/Clearance Light # MCL-91RK the mounting holes are spaced 2 inches apart on center. I have included a link to a video review of this light for you.
view full answer... - Availability of Red and Amber Optronics ThinLine Mini LED Side Marker or Clearance LightsThe red lens equivalent of the amber Optronics Side Marker Light # MCL-91AK that you referenced is part # MCL-91RK. I've attached review videos for both that you can check out.
view full answer... - Can Mini Thin Line Sealed LED Marker/Clearance Light # MCL-91RK be Used to Replace a 2-Wire LightMini Thin Line Sealed LED Marker/Clearance Light # MCL-91RK only has 1 wire because it grounds through the mounting hardware. You can still use it by putting a ring terminal on the existing ground wire and running the ground screw through it. The other wire is the power wire.
view full answer... - Is There a Red Version of the Optronics GloLight MCL190ABThe closest light we have to what you referenced in red would be the part # MCL-91RK.
view full answer... - Recommended Replacement Rear Upper Clearance Lights for 2004 Roadtrek 190I looked up some photos of a 2004 Roadtrek 190 online and the rear upper clearance lights appear to be very similar to the ThinLine Mini LED Side Marker or Clearance Light part # MCL-91RK so that is what I recommend using for replacement. If these won't work for you then you'd need to select another option from the list below. It's unlikely you'd find an exact replacement due to age so close is all we're going for here. They all install pretty much the same so there should not be many issues...
view full answer... - Availability of a Red Mini Thin Line Sealed LED Marker/Clearance LightFor a red Mini Thin Line Sealed LED Marker/Clearance Light, you will need to use # MCL-91RK. The R in the part number indicates that it is a red light.
view full answer... - Red Trailer Clearance Light That Measures 2-1/2 Inches x 1 InchWe do have red trailer clearance lights that are 2-1/2" x 1", and what you will need is the following: - Thinline LED Clearance and Side Marker Light w/ Chrome Bezel # MCL-91RK
view full answer... - LED Lights for 1991 Ranger Boat TrailerWe can get you all the lights you need though it will come in the form of different parts because there isn't a specific "kit" containing everything. For the stop/turn/tail lights you can use the GloLight LED Trailer Tail Light # STL178RFPB; this is a surface mounted light that is 7-1/2" wide x 3-5/16" tall x 1-1/8" deep and has an industry-standard 3-prong plug to connect to your trailer. Then for your clearance lights you can use # MCL-91AK, which is amber and measures 2-1/2" x 1-3/16"...
view full answer...
- Recommended Lights Similar to Optronics Tail Light for Tear TrailerThere are a number of lights that would work well for that are similar to the Optronics # STL72RB tail lights you have. For your three running lights I recommend the Thinline LED Clearance and Side Marker Light w/ Chrome Bezel # MCL-91RK. For the reflectors I recommend checking out the Optronics # RE11AB for amber and # RE11RB for red. Additionally, LED # ILL22CB would work great as an exterior light; it is a surface-mounted light with a 2-wire design. LED light # RVILL34 is also going...
view full answer... - Does Optronics Red Side Marker Light Include a Base and WiringTrailer light # MCL-91RK includes the red clearance light and chrome housing in addition to the plug. Basically it is exactly like # MCL-91AK except it is red instead of amber so they will match.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Michael H
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robin
2/18/2024
Completely satisfied! My husband installed the new light on our RoadTrek RV and we are now lit! As the kids say...