bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

How to Tow a Trailer with Reverse Lights 2013 Nissan Leaf  

Question:

What harness do I need for a 2007 Toyota Prius that is a 5 way as well?

1

Helpful Expert Reply:

Yes, the LED Trailer Light Kit part # TL16RK, Light Guide LED Backup Light part # BUL602CB, 25 ft. Wishbone 5-Way Trailer Harness part # A25W5B, and Right Angle 3-Wire Pigtail for Optronics Trailer Lights part # A47PB will all work together and give your trailer reverse lights.

The Submersible Tail Light Kit part # TLL36RK comes with a 4-way wiring harness and since you will be using a 5-way wiring harness, the more cost effective solution would be to purchase the Waterproof, Over 80" LED Trailer Light Kit part # TLL160RK and Mini Thin Line Sealed LED Marker/Clearance Light part # MCL-91AK instead.

In order to activate the reverse lights, you will also need a 5-way trailer connector on your vehicle. If you already have a 4-way then you can just use the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter part # 20036 but if you do not already have a 4-way trailer connector then you will also need to use the Curt T-Connector Vehicle Wiring Harness part # C56227 on your 2013 Nissan Leaf.

I have attached our trailer wiring help article to assist you with installation.

expert reply by:
1
Conner L

Jared

2/7/2018

What harness do I need for a 2007 Toyota Prius that is a 5 way as well?

Reply

Conner L.

2/7/2018

If you already have a 4-way trailer connector on your 2007 Toyota Prius, then all you will need to use for a trailer with a 5-way wiring harness is the same Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter part # 20036 listed above. However, if you do not already have a 4-way trailer connector then you will also need to use the Curt T-Connector Vehicle Wiring Harness part # C56147. The 4-way wiring harness is a direct plug and play option that will not require you to cut or splice any wires. The 5-way adapter is also a plug-in option but will require you to splice into the vehicle's reverse light circuit which can easily be done using a circuit tester like part # PTW2993.
Reply
Ask The Experts a Question >>

Products Referenced in This Question










Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for C56147Instructions for C56227

Miscellaneous Media

wiring
Trailer Wiring Diagrams
Performance Tool Hook Probe Circuit Tester Review
Performance Tool Hook Probe Circuit Tester Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>