Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center

See what our Experts say about this Redline Trailer Leaf Spring Suspension

• Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
  To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 17 feet, then the center-line location...
  view full answer...
  
• Replacement Suspension and Brake Parts for a 1973 Bara LS Trailer
  Thank you for all of the info! Based on what you told me and the pictures you sent in separately I believe I know what you need. The brakes you need are the Electric Trailer Brake Kit # AKEBRK-35-SA which measure 10" x 2-1/4" and have a 4 bolt flange mounting pattern. I also recommend replacing your hub and drum assemblies as well. For this the Trailer Hub and Drum Assembly # AKHD-545-35-K should work but you will want to verify that your trailer currently uses inner bearing # L68149...
  view full answer...
• Are the Bushings Included in the APT1 Tandem-Axle Hanger Kit for Double-Eye Springs?
  The bushings on the 2 long equalizers are included in the # APT1 kit, but the rest of the bushings will typically come included with the leaf springs that are not included in this kit. Which ones you will need to purchase would depend on the diameter sized hole in your leaf spring, if it does not already accommodate the 3/4 inch diameter of the bolts included into this kit. I have linked our bushings as well as the bushing that has a 3/4 inner diameter to this page for your convenience.
  view full answer...
• Why Do Suspension Hanger Kits Have Different Height Hangers
  The varying heights of the hangers is all designed so that you end up with the leaf springs as level as possible and still end up a desired distance away from the trailer frame. It may seem odd, but the center hanger will stick down further because the shackle straps that attach to the equalizers make up for the height difference. The equalizer is there so there is movement between the axles going over bumps to help smooth things out. The # APT1 uses a very flat equalizer so to make up...
  view full answer...
  
• Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
  To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 10 feet, then the center-line location...
  view full answer...
  
• How to Determine Trailer Leaf Spring Hanger Spacing
  You can refer to the linked articles on trailer axle spacing and leaf spring suspensions to help you determine where to position your spring hangers on your tandem axle trailer build. Hanger spacing depends on axle placement and axle placement should be determined based on having the trailer's tongue weight in the appropriate 10- to 15-% range. As you work out the design for the trailer, it is best to have the layout of the trailer finalized before placing the axles. This will ensure that...
  view full answer...
• Recommended Tire to Fender and Tire Sidewall to Trailer Frame Clearance
  The minimum distance between side wall of the tire and and trailer frame depends on the trailer, you definitely don't want the tire and the trailer to touch so 2" of clearance is a safe distance however you may be able to get away with less as long as they do not touch. The recommended clearance between the top of the tire and the fender is 3-4 inches when the suspension is fully compressed to accommodate for suspension travel.
  view full answer...
• Individual Parts for Trailer Suspension Hanger Kit APT1 without the Hangers
  You can get the parts in hanger kit # APT1 separately but not as a kit minus the hangers. The equalizer is # TREQR83. For shackle straps you will need 8 of # 115052. For shackle bolts and nuts you would need 12 of # 166081. For the 3/4 inch wet bolts, pins, nuts, and grease fittings you would need 2 of # 126A1.
  view full answer...
• Installing an Equalizer Hanger and Finding the Location for Mounting
  Thank you for the weights but to give you the exact spot I would need the length of your trailer. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. If you have a 20 foot trailer the center would need to be at the 8 foot point measured from the back, 12 foot point if you measured from the front. I have attached a help...
  view full answer...
• Trailer Suspension Hanger Kit Spacing for a Tandem Axle Trailer
  I would need to know the axle capacities to be sure but I can venture an educated guess. The only tandem axle double-eye leaf spring hanger kit we have that includes 8 inch equalizers is # APT1. With this kit, the center of the forward hanger to the center of the rear hanger would be 29-1/2 inches. It is the same from the center hanger to the rear hanger on center. That would make the center to center distance between the 2 axles 34 inches. I have included a picture showing the measurements...
  view full answer...
  
• Does it Matter Which Way a Double-Eye Trailer Leaf Spring Faces
  If they are double-eye leaf springs, it should not matter which way they are facing. But if they are slipper springs, the eye end is at the front and the slipper is at the back. The springs that we carry are not marked as to which end is front and I have seen them either way on a trailer. I have included some links to suspension FAQs for you.
  view full answer...
• Spring Hanger Position for Tandem Axle Trailer with 6000 lb Axles
  To determine the location for the axles on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 18 feet, then the center-line location for the equalizer...
  view full answer...
  
• Tandem Axle Trailer Suspension Hanger Kit with 8 Inch Long Straight Equalizers
  The tandem axle version of trailer suspension hanger kit # APTT1 is actually # APT1. I have also included a link to all of the tandem axle kits we have.
  view full answer...
• Where to Place Axles on a Tandem Axle Trailer
  To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 10 feet, then the center-line location...
  view full answer...
  
• Is There An Upgrade or Rebuild Kit for Tandem Trailer with Straight Equalizers
  Yes, we do offer some great options to replace and or upgrade the straight equalizer setups. If you are looking for just a complete kit then go with the Tandem-Axle Trailer Hanger Kit part # APT1 (the hangers can be discarded). If you are just looking to upgrade what you have then go with the Never Fail Tandem Axle Suspension Upgrade Hardware Kit part # LC281285. There is also the option of adding shocks which will do the most for improving ride quality, the Lippert Components Bolt-On...
  view full answer...
  
• Hanger Distance for Installing 25-1/2 inch Leaf Springs with Hanger Kit # APT8
  To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 10 feet, then the center-line location...
  view full answer...
  
• Replacement Suspension Components for 1970's Tandem Axle Horse Trailer
  We do have replacement parts for your trailer. Starting with the equalizer we have the # TREQR89. It sounds like you have 3-1/8" shackle straps so I recommend the MORryde Suspension Upgrade Kit # MR76ZR. This comes with wet bolts, bronze bushings, and 1/2" thick shackle straps. I believe you're talking about hangers when you gave those shackle dimensions. The closest we have to your front and rear are the # 115918 which are 2-3/8" tall. The closest thing we have to 6-3/4" is the 5-7/16"...
  view full answer...
• Will Trailer Suspension Hanger Kit # APT5 Fit a Trailer with 2-3/8 Inch Diameter Axle
  You can use the Tandem-Axle Trailer Hanger Kit # APT5 for your trailer with the 2-3/8 inch axle. A 2-3/8 inch diameter axle is typically found on 3,500 pound axles which is within the range of this kit (2,000 to 7,000 pound axles). The measurements in the chart on the page can be used as a guide. A better option for a 2-3/8 inch axle is kit # APT3, # AP233-H248, or # APT1. It all depends on the axle spacing, spring measurements, and equalizer length.
  view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?