Fulton F2 Jack Mounted on a Ranger RT188 Trailer

Question

Question:

Thought I would send you another customer photo of what the Fulton F2 Jack looks like mounted up on the trailer. FYI, the dual wheel model will contact the frame on this particular Ranger Trail trailer, but the single wheel seems to do fine.

asked by: Kenneth E

1

Helpful Expert Reply:

Thanks! I attached the picture you submitted so that other customer can see what the Fulton F2 part # F1413140334 looks like installed on Ranger RT188 trailer.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The only trailer jack that will work with your existing mounting bracket and not contact the boat with a full rotation of the handle is the Fulton Bolt-Thru Swivel Marine Jack part #F1411300301. I understand this does not have the sharkskin coating…

view full answer...

Answer 2

I looked up pictures of your boat and the trailer it comes with and the jacks in the pictures look like bolt-on swivel jacks with a sidewind crank handle. The most similar setup would be the #FTJ12000101 which matches the criteria mentioned and has…

view full answer...

Answer 3

Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into…

view full answer...

Answer 4

The etrailer Invisible Base Plate Kit #e86YR is compatible with compatible with all etrailer, Demco, and Blue Ox tow bars so you won't need an adapter to connect to your Aventa II tow bar.

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

Technically, chrome is harder than stainless steel but it isn't going to be a difference between stopping a thief or not stopping one. If a thief really wants to, they'll be able to remove any lock, locks are more of a theft deterrent and…

view full answer...

Answer 7

The best option to install a new trailer jack on a boat trailer with existing snap-ring mounting bracket would be to go with a bolt-on option, the Round Swivel Marine Jack part #MJ-1200B. I know you want to try and reuse the existing mounting bracket…

view full answer...

Answer 8

The Fulton F2 Fully Enclosed Trailer Winch #FW20000301 does not have any kind of adapter plate to allow you to mount it to a different bolt pattern. You will have to drill new holes if you want to use this winch. I attached a diagram below with the…

view full answer...

Answer 9

The trailer hitches that fit a 2023 Ford Escape will not fit the Plug-In Hybrid version so we'll need to look into some alternative options so you can carry your extra cargo. If you just need to carry some bikes then I recommend getting the…

view full answer...

Fulton F2 Jack Mounted on a Ranger RT188 Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching