Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
(33 reviews)
Price: $112.93
In Stock
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
Item # AKHD-865-7-1-K
Our Price: $112.93
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (33)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-865-7-1-K
- 8 on 6-1/2 Inch
- For 7000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Pre-Greased
- Standard
- 9/16 Inch Stud
- 14125A
- 25580
- etrailer
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 9/16" studs included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Zinc-enriched paint on drum adds durability
- Zinc-finished bolts resist corrosion
- Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 7,000-lb axles with #42 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 12" diameter x 2-3/8" long
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2
- Wheel studs: 9/16" diameter x 1-5/8 long
- Grease cap flange diameter: 2.722"
- Weight capacity: 3,500 lbs
- 1-Year limited warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KBD2-865-39 AxleTek 12" Hub and Drum Assembly for 7K Axle with Hardware - 8 on 6-1/2 - Pre Greased
Compare to Dexter 8-219-13UC3
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased - AKHD-865-7-1-K
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 9/16" studs included.by: Kenton04/07/2022
I replace my brakes every 3 or 4 years. It's almost impossible to find a shop that CAN or will turn the inside face where the magnet wears so replacement is the only option. These are a great deal & work well. ALWAYS be sure to get the correct stud diameter when you order!
by: Cynthia 02/06/2024
Received fast and it all worked great, still working.
by: Dan 05/11/2023
Much easier to replace the whole assembly, one year later trailer brakes working great…
by: Gary06/12/2017
I purchased 4 of these wheel assemblies for my 1993 boat trailer. It was far cheaper to replace the entire assembly than to buy all the peices and put it together myself. The parts were all high quality, and included evrything except the headache of assembly. I'll be back in 20 years or so. :)
Gary
6/13/2018
The items mentioned are still working well. I have been so pleased with my etrailer purchases that we bought 4 new tires and rims from you this spring. Paid less for 4 tires and rims than the local dealer wanted for two tires, no rims.
by: Michael 09/20/2022
A direct replacement for the original hub and drum assemble. Bearings are pre-greased so installation was quick and easy. Shipping was fast, customer service was excellent and reasonably priced.
by: George 09/23/2022
Purchased as a spare in case of issues while on long trips with drag car and trailer. New trailer 8 lug and old spare was a 6 lug. Needed one quickly before long trip a week away. You had it in stock and shipped free in two days. Great prompt service. Much appreciated.
by: Dan 09/26/2022
The best way to do a brake job on a trailer…replace it all, quick, inexpensive, easy!
by: Chuck K07/11/2017
I purchased new brakes for my boat trailer, electromagnetic drums and the price and quality were excellent. Had one small issue with the packaging and it was promptly corrected.
I would highly recommend etrailer!!
by: kdanie08/07/2017
Great replacements for worn drums/hubs. Most machine shops can't/won't turn the magnet surface so replacement is the best solution. There are 3 size of studs listed, be sure you order the correct studs for your application. Nice having bearings & seal included in one package. Be sure to clean the machined surfaces in the drum with brake cleaner or lacquer thinner to remove the preservative. Pack the bearings with grease, install the seal and you are ready to go!
by: GLENN M04/17/2017
All of the items we ordered for the goose neck trlr. seemed to be a great product. The hubs, brakes and bearing buddies looked and felt to be a superior product. We would definitely would purchase these items again if needed. Usage and time will tell the whole story of reliability.
by: William09/03/2018
At this time everything is running well but soon I’ll have the bearings repacked and will know more. Then I can write a better review
by: David03/09/2018
Everything was done easily and delivered on time. Only one problem came about. I opened the package to for the hardware for hubs and one of the seals was damaged very badly and wasn't usable at all. Glad I had one already. Other than that all was good
by: Doug09/21/2017
I order all my trailer needs from e-trailer they have great quality and fast shipping Thanks etrailer. Doug
by: Kenneth12/27/2018
Thank you so much etrailer. This Team is so easy to do business with
by: Thomas 12/01/2022
Didn't know it came with the nuts and c aps
by: David 11/19/2022
Best in the business!
by: Bob 11/17/2022
Very fast shipping ordered it and it went out the same day
by: James10/19/2022
Great customer service. Very informative and fast shipping
by: Jeffrey 09/26/2022
Excellent parts Fast shipping
by: Jeremy05/11/2022
The part fits. The price is fair. This is installed and in the field working. Great experience.
by: Marianne09/03/2020
Great service. Very professional staff to work with. Right product good timing.
by: William S.04/03/2019
Item was as described and arrived in good condition. Item shipped in a timely manner.
by: Robert06/10/2022
Very Fast shipping!
by: Dale 09/29/2023
25
33
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Will 7K Trailer Hub and Drum Assembly - 8 on 6-1/2 AKHD-865-7-1-K Work with Dually WheelsTrailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 Item # AKHD-865-7-1-K will accept hub-centric or lug-centric wheels. There is also no restriction on use with dually wheels as long as everything is within the capacity of the lowest rated component in the system. I have linked a couple of videos on this hub and drum assembly for you. If you also need brakes the drum accepts 12x2 inch assemblies such as # AKEBRK-7R-SA for the right and # AKEBRK-7L-SA for the left.
view full answer... - Trailer Hub for 7k Trailer Axle on Cam Dump TrailerSome brands of trailer hubs happen to be more expensive than others is one aspect and some hub configurations are less common so they price ends up being higher. The 7k axle hubs like the # AKHD-865-7-1-K that are a confirmed fit for your dump trailer happen to be a pretty common setup and our etrailer brand does a great job keeping the prices down.
view full answer... - Swapping to Larger 9/16 Wheel Studs On a 2017 Dutchmen Voltage 4005 5TH Wheel Toy HaulerYour Lippert Axle uses 1/2"-20X1.99" studs that have a 0.617 knurl for seating in the hub. I can recommend you a replacement hub assembly that does have the 9/16" studs, as I cannot locate any 9/16"-18 studs that have the same knurl dimensions. The etrailer Trailer Hub and Drum Assembly # AKHD-865-7-1-K come preloaded with the 9/16" studs, lug nuts, new races, and bearings as well as a grease seal. This will also save you the time of having to press out and in all the wheel studs on your...
view full answer... - Replacement Nut Retainer For etrailer Trailer Hub and Drum Assembly # AKHD-865-7-1-KWe do offer a few nut locks for your spindle as one is not included with the Trailer Hub and Drum Assembly # AKHD-865-7-1-K. Depending on your spindle we have the Nut Retainer # 6-190, Spindle Washer # 5-101 or Cotter Pin # 165649 for your spindle.
view full answer... - Replacement Hub and Brake Assemblies for Dexter 8-219 Wheel HubsYou have some options with the 8-219 for replacement parts. These kits will include new brake hubs, bearings, races, seals, caps and wheel nuts. 1/2" Wheel Studs Grease Cap # 8-219-4UC3 1/2" Wheel Studs EZ-Lube Cap # 8-219-4UC3-EZ 1/2" Wheel Studs Oil Bath Hub # 8-219-9UC3 9/16" Wheel Studs Grease Cap # AKHD-865-7-1-K 9/16" Wheel Studs EZ-Lube Cap # 8-219-13UC3 5/8" Wheel Studs EZ-Lube Cap # 8-219-18UC3 The Dexter Electric Trailer Brake Kit # 23-180-181 will require the brakes to be...
view full answer... - Recommended Hub and Drum Assemblies and Brakes for 7,000 Pound Triple Axle TrailerTo determine exactly which hubs you need you'll need to find your bearing numbers. Most likely you have # 25580 and # 14125A but verify to be sure. If these are correct you'll next want to find the diameter of your wheel studs and if you have E-Z Lube axles. If the studs are 9/16 inch use # AKHD-865-7-1-EZ-K for E-Z Lube axles and # AKHD-865-7-1-K for standard axles. For 1/2 inch studs instead use # AKHD-865-7-2-EZ-K for E-Z Lube or # AKHD-865-7-2-K for standard axles. Then you need...
view full answer... - Is Hub Replacement Required for 15 Inch Wheels to be Upgraded to 16 Inch Wheels?To upgrade from a 15 inch wheel to a 16 inch wheel you won't need to change your hubs for a new bolt pattern. If you want to change your hubs for a different bolt pattern you will need the numbers on the inner and outer bearings as well as the seal of one of your hubs. I'd be happy to help with those numbers to determine if there is a fit. We do have 16 inch tires and wheels that fit that 6 on 5-1/2 inch bolt pattern if you want to keep the hubs you currently have. You will simply...
view full answer... - Recommended Replacement Brake Hubs and Brakes for a Dexter 7K AxleI wasn't able to find anything relating to that part number and since you're unsure of what you have I'd just recommend swapping the entire hub to make everything easier. You're just going to need to choose the hubs that have your current wheel studs. For 1/2" studs with a grease cap you'll want # 8-219-4UC3, For 1/2" studs with an E-Z lube cap you'll want # 8-219-4UC3-EZ, For 1/2" studs with an oil bath hub you'll want # 8-219-9UC3, For 9/16" studs with a grease cap you'll want # AKHD-865-7-1-K, For...
view full answer... - etrailer Hub and Drum Assemblies For 7,000LB Axle With 1/2" Wheel StudsThe Trailer Hub and Drum Assembly # AKHD-865-7-2-K is the same as the Assembly # AKHD-865-7-1-K you found but with 1/2" wheel studs versus the 9/16". We also have the Assembly # AKHD-865-7-2-EZ-K if you need the EZ Lube grease cap to access the grease zerk on your spindle.
view full answer... - Comparing etrailer 7K Trailer Hub and Drum Assemblies with 8 on 6-1/2 Bolt PatternThe biggest difference between etrailer hub and drum assembly # AKHD-865-7-2-K and # AKHD-865-7-1-K is the wheel studs. Assembly # AKHD-865-7-2-K uses wheel studs that are 1/2" diameter x 1-5/16" long. Assembly # AKHD-865-7-1-K uses wheel studs that are 9/16" diameter x 1-5/8 long. So you would want to use the one that matches what the wheels require. I have linked video reviews of both for you.
view full answer... - Recommended Brake Assemblies And Drum Assemblies For 7,000 lb Dexter AxlesFor your Dexter 7,000 lbs axles, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. These brake assemblies are side specific and are labeled for you. They are self adjusting after the initial adjustment at installation. We don't carry the spindles for your 7,000 lb axles, but we do have the hub and drum assemblies that will fit a traditional style spindle or an E-Z lube spindle with the 9/16 lug bolts. For a...
view full answer... - Recommended Hub/Drum Assemblies With 8 Lugs For Spindle MeasurementsIf you want 1/2 inch lugs for your 8 lug hubs, I recommend the Trailer Hub and Drum Assembly # AKHD-865-7-2-K. If you want 9/16 inch lugs, I recommend hub/drum # AKHD-865-7-1-K. These assemblies come with the bearings and seals to fit your measurements, only taking an educated guess on the seal based on your other measurements. These hubs have zinc-enriched paint to add durability and resist corrosion and they come with the bearings, races, grease seal, grease cap, and lug nuts.
view full answer...
- Replacement Hubs for 7,000 Pound Axle With 15123 Outer and 25580 Inner BearingsThe answer to your question depends on the bolt pattern you need. We have one hub that actually uses a # 15123 bearing which is the # 8-174-5UC3. This has a 5-spoke utility bolt pattern. More than likely you have an 8 on 6-1/2 bolt pattern on your trailer. If that is the case you can use the # AKHD-865-7-1-K. The # 14125A outer bearing has the same 1.25" inner diameter so it will fit your spindle. However, I recommend measuring to find the inner diameter of your grease seal. The included...
view full answer... - 7k Trailer Axle Hub/Drum for Hub with 10-36 Seal and 14125A BearingBased on your bearing and seal numbers the correct hub is the etrailer part # AKHD-865-7-1-K that you referenced. We are able to get a really good deal on our house brand of hub/drums and we decided to pass the savings on to the customer which is why this hub costs a lot less than similar fits.
view full answer... - Manufacturer of Trailer Hub and Drum For 7K Axles AKHD-865-7-1-KSo the brand is etrailer brand, but I believe you are likely asking the manufacturer, which is AxleTek for the 7K hub and drum you asked about: - Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # AKHD-865-7-1-K The # AKHD-865-7-1-K comes pre-greased and includes the bearings, races, and grease seal so you're all set with this hub and drum combo.
view full answer... - Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound AxlesThe size socket used isn't necessarily going to be the same as the nut or stud thread size. It is usually larger since the outer width of a hex head is larger than the threaded diameter. Hub and drum assembly # 8-219-13UC3 for 5,200 to 7,000 pound axles does indeed have a stud diameter of 9/16 and would take 9/16 inch lug nuts. We also have the similar etrailer model, # AKHD-865-7-1-EZ-K, that also has 9/16 inch studs. Both it and the above assembly are for EZ Lube axles. If your axles...
view full answer... - How To Use 17.5" Wheels On a 7,000 Lb Trailer AxleIn order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll need the Trailer Hub and Drum Assembly part # AKHD-865-7-1-K for standard or part # AKHD-865-7-1-EZ-K for EZ-Lube. Then, you can use a 17.5" diameter trailer wheel like the Aluminum Lynx Trailer Wheel part # 274-000006. I have attached a full list of wheel options...
view full answer... - Parts Needed to Switch From Dexter Hubs With 5 Spoke Utility to Standard Bolt PatternThis will be a pretty simple swap since the # 8-174-5UC3 uses a standard bearing combination. If your axle has a 6,000 lb capacity you can use the # AKHD-655-6-EZ-K as a replacement. This has a 6 on 5-1/2 bolt pattern. If your capacity is 7,000 lbs you can use the # AKHD-865-7-1-K but you will have to trade out the grease seals for # RG06-090 to match your spindle. This has an 8 on 6-1/2 bolt pattern. I have attached a link below to our available tires which can be filtered by size and...
view full answer... - How to Pick Out Replacement Hub for Trailer that Sheared Off StudsThat's pretty crazy that you ended up shearing off all 8 of your wheel studs. Normally they will break one at a time but not all together like that. This makes me wonder if maybe you were losing them all one at a time until the last few went out together. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Installed by:
Brent H
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenton
4/8/2023
Still working fine. about due to repack the bearings but Ill wait for warmer weather.