Manufacturer of Trailer Hub and Drum For 7K Axles AKHD-865-7-1-K
Question:
What brand is your AKHD-865-7-1-K 12X2 Drum
asked by: Dave W
0
Expert Reply:
So the brand is etrailer brand, but I believe you are likely asking the manufacturer, which is AxleTek for the 7K hub and drum you asked about:
- Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # AKHD-865-7-1-K
The # AKHD-865-7-1-K comes pre-greased and includes the bearings, races, and grease seal so you're all set with this hub and drum combo.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Select Hub/Drums & Electric Brakes For Trailer
- Q&A: Replacement Hub/Drum for Lippert 8k Hub 2420801
- Article: Trailer Wiring Diagrams
- Article: Trailer Maintenance Schedule
- Q&A: Which Curt Trailer Hitch is a Fit for 34 inch Wide Trailer Frame
- Q&A: Troubleshooting Electric Trailer Brakes That Hum But Do Not Engage Drums
- Q&A: Replacement 12-1/4 Inch x 3-3/8 Inch Braking Assembly with Four Bolt Brake Mounting Flange
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Does Replacement Brass Connector # T4750300 Fit Dexter DX6.6 Actuator
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Availability of Trailer Hitch for 2023 Mercedes-Benz GLE 350
- Article: How to Measure a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide