Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Raw Finish - 1/2" Bolts - 7,000 lbs

Video Transcript for Kodiak Trailer Hubs and Drums - Hub with Integrated Rotor - KHR13712 Review

Today, we're going to review part number KHR13712. This is the Kodiak 13 inch hub and rotor. It has the 8 on 6 and 1/2 inch bolt pattern, and it is in a raw finish. It does use the half-inch wheel studs, and it is designed to fit a 7,000 pound axle. This hub and rotor assembly makes it easy to change from drum brakes to disc brakes. It's made of a machined cast iron, and it is a one-piece unit.

This one-piece unit, because it is a balanced unit, will help provide a smooth ride, and the machine process on it will help minimize runout and warping. If you notice on this rotor, it is a vented design, which means it will effectively dissipate the heat, help prevent any heat-related damage to the rotor. It uses the half-inch wheel studs. The bearing races are the industry standard bearing races, and they are pressed-fit in, they are included. The outer race right there, and the inner race right in there. This is a cast iron construction.

This will ensure a favorable friction coefficient for necessary stopping power, and it is in a standard automotive raw finish. Again, the specs on this, it does fit a 7,000 pound axle, it does use a wheel size of 16 inches or larger, has a bolt pattern of 8 on 6 and 1/2 inches, the wheel bolt diameter is a half-inch, so it uses half-inch lug nuts. The diameter on the rotor itself is 13 inches. The bearings and the grease seal and the grease cap are all sold separately on our website. If you go to the product page of this part number on our website, to the right of the page, you'll see "Related Products," and it'll list the parts that are needed. That should do it for the review on part number KHR13712, a Kodiak 13-inch hub and rotor, with the 8 on 6 and 1/2 inch bolt pattern, in the raw finish. .