Summer Starts Here - Save up to 70%
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with an dacromet finish, this 1-piece unit is balanced for a smooth ride and furnished with standard races.
Features:
Specs:
Bearing, Race and Seal Information
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Kodiak 13" diameter Dacromet hub and rotor for a 7,000 pound axle. It has an 8 on 6-1/2" bolt pattern with half-inch diameter studs. Now this is a nice single piece hub and rotor assembly. Makes installation a snap, whether you're retrofitting or switching from drum brakes. The one-piece machine process will minimize runout and warping. So it's a balanced unit, provides a nice smooth ride.
Also since it's one whole assembly, the contaminants can't get in between the rotor and hub like on a slip-on rotor assembly. It does use the vented design. You can see the vents right here. This will effectively dissipate the heat, prevents any heat-related damage. Does use half-inch diameter wheel studs and industry-standard bearing races already pre-installed for the outer and inner bearings.
Now this is a cast iron construction, ensures a favorable friction coefficient for necessary stopping power. And it does use a Dacromet finish on it to provide corrosion resistance for freshwater and limited saltwater use. This plating does meet the 300 to 400 hour salt spray rating.Again on the fits on this, it'll fit an axle capacity of 7,000 pounds. It's 3,500 pounds capacity per hub and rotor. So when this is used with one on the other side, it'll meet your 7,000 pound axle capacity.
It does use the wheel size of 16 inches and larger. We mentioned the bolt pattern on this is 8 on 6-1/2". Wheel lug size it uses is a half inch. Rotor diameter again is 13 inches. And the bearings and seals are not included.
Those we do sell separately. They're usually listed on this product page as a related product. It does use the inner bearing of Part Number 25580. Outer bearing, Part Number of 14125A. And the Seal Number of RG06-070.But that should do it for the review on the Kodiak 13" diameter Dacromet hub and rotor for 7,000 pound axles with the 8 on 6-1/2" bolt pattern and the half-inch diameter studs.
Average Customer Rating: 5.0 out of 5 stars (10 Customer Reviews)
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with an dacromet finish, this 1-piece unit is balanced for a smooth ride and furnished with standard races.Items were great, had problem with the shipping damage on shipment but they quickly corrected the problem and I am very happy.
Just as advertised. Got my trailer back on the road
Quick and efficient thanks
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.