DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 - Galvanized

Video Transcript for Review of DeeMaxx Trailer Hubs and Drums - 7K Idler Hub - DE46VR

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this DeeMax galvanized trailer idler hub. Now, this is a marine grade trailer hub assembly that's going to fit your 7,000 pound trailer idler axles with the number 42 spindles. You can also pair this with an over the hub 13 inch diameter rotor for your disc brake applications if you wanted to have brakes on your trailer. This galvanized steel construction is gonna be very durable and corrosion resistant, so it is gonna be great for your boat or snowmobile trailer. The wheel stud dimensions here are a half inch in diameter and they are two and a half inches long.

You can see we've got the eight half inch bolts in the eight on six and a half inch bolt pattern. So, having these long wheel studs is going to allow you to mount an over the hub brake rotor or a custom wheel with a thicker mounting face. The races are pre-installed, so you've got your inner and your outer race already installed there. You can see those part numbers on the screen there if you need those numbers. The bearings and the grease seal are sold separately.

You can see the compatible part numbers on the screen there as well. So, if you're wanting to put those in place, if you don't already have them, you can find them here@etrailer.com using those part numbers that you see there. So, that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.

.