Kodiak 13" Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs
(75 reviews)
Price: $110.98
In Stock
Kodiak 13" Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs
Item # KR1389D
Our Price: $110.98
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (75)
- Q & A (0)
- Videos (1)
- Photos
Kodiak Accessories and Parts - KR1389D
- Trailer Brakes
- Disc Brakes
- Rotors
- Kodiak
- 7000 lbs
- 8000 lbs
Slip-on rotor fits over 7,000-lb to 8,000-lb idler axles and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, well-functioning rotor. Dacromet provides superior rust resistance.
Features:
- Slip-on, over-the-hub rotor makes it easy to convert idler axle to disc brake axle
- Fits over standard idler hub and is held in place by wheel and wheel bolts
- No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged
- Distance from hub face to hub face will increase by approximately 1/2"
- Vented design effectively dissipates heat, preventing heat-related damage
- Cast iron construction ensures a favorable friction coefficient for necessary stopping power
- Dacromet plating provides superior corrosion resistance for freshwater or saltwater use
- 300- to 400-Hour salt-spray rating
Specs:
- Fits:
- Axle capacity: 7,000 lbs - 8,000 lbs
- Wheel size: 16" and larger
- Bolt pattern: 8 on 6-1/2"
- Rotor diameter: 13"
- Bolt hole diameter: 9/16"
- 3-Year warranty
2/R-133-8A-9-DDD Kodiak Disc Brake Rotor Only - Dacromet Finish - 9/16" Wheel Bolts - 7,000 lbs - 8,000 lbs
Replaces KR1389SC (ROTOR-133-8-9-SCAD) and ROTOR-133-8-9-DAC
Video of Kodiak 13" Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Kodiak Trailer Brakes - Slip-On Rotor - KR1389D
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Kodiak 13 inch slip-on rotor with the 8 on 6 1/2 inch bolt pattern and it fits 7,000 pound to 8,000 pound axles. And you can see it has a Acrodrome finish to it. Now this is a slip-on over the hub rotor so it makes it very easy to convert your idler axle to a disc brake axle. This will fit over a standard idler hub and it's held in place by the wheel and the wheel lug nuts. This one here is designed to fit hubs that use the 9/16 inch diameter wheel studs.
Now there's no need to replace your entire hub and rotor assembly if only the hub or the rotor becomes damaged. You can see it uses the vented design on it which'll effectively dissipate heat, prevents any heat-related damage, and it is a cast iron construction, ensures a nice favorable friction coefficient for necessary stopping power. And as we mentioned, this has a Dacromet plating on it to provide superior corrosion resistance for fresh water, salt water use. Does have a 300 to 400 hour salt spray rating on it. Now this is designed to fit axles that are 7,000 pound to 8,000 pounds capacity.
Does use a wheel size of 16 inches and larger. We mentioned the bolt pattern as an 8 on 6 1/2 inch bolt pattern and the diameter of the rotor is 13 inches. But that should do it for the review on the Kodiak 13 inch slip-on rotor with the 8 on 6 1/2 inch bolt pattern for 7,000 pound to 8,000 pound axles..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
Customer Reviews
Kodiak 13" Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs - KR1389D
Average Customer Rating: 4.9 out of 5 stars (75 Customer Reviews)
Slip-on rotor fits over 7,000-lb to 8,000-lb idler axles and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, well-functioning rotor. Dacromet provides superior rust resistance.by: Troy 02/15/2024
Great customer service and speedy shipping time.
by: Jerry08/23/2021
Same as oem that came on my trailer, arrived quickly and was price matched.A win all around.
by: James08/21/2018
etrailer is the best when it comes to having stuff in stock and fast shipping
by: Ken 07/14/2022
right part right fit
by: Agnes06/14/2021
I received my order and everything is great. Perfect. I never seen a business ever in my life to take care of the costumer like you did. Thank you so much.
by: Griffin04/12/2024
by: Mark 03/16/2023
by: David 10/06/2022
by: Robert 01/12/2023
Lost a hub in route out west and needed professional advice, great service and quality parts.
Got all if it here at Etrailer.
Parts arrived fast as described and fit perfectly. Made our breakdown less stressful knowing Etrailer was helping us get everything we needed.
Thanks much
by: The wife made me buy a boat.06/29/2016
Boat trailer caliper was seized and causing the brakes to overheat. Headed over to etrailer.com since they seem to have the best part selection and easiest website to navigate.
I purchased a caliper that came with pads pre-installed (https://www.etrailer.com/Accessories-and-Parts/Kodiak/KDBC225DAC.html) and a rotor (https://www.etrailer.com/Accessories-and-Parts/Kodiak/KR12D.html).
Installation went smoothly. I'll be back for the other side when it's time.
Easy product search process. Easy order process. Fast delivery.
by: Matt W08/28/2022
These rotors replaced an identical set from the OEM on a WESCO dual axle trailer. Unfortunately, my brake pads disintegrated and scored the rotors after two years of salt water use, but these rotors seem like great quality and were very easy to replace. I used anti-seize for this job. Highly recommended, especially if you dip them in salt water at all.
by: Andy 04/10/2024
Exactly what I needed and great quality! Ordered the rotor on Sunday and it arrived Tuesday. Great service.
by: Richard P09/22/2019
you had all the parts to completely rebuild my trailer brakes to new condition. As it is a salt water trailer, they are holding up very well. Thanks for being here and your good service
by: Michael07/25/2023
Solid performance.
by: Joe L.01/29/2015
Hard to beat this, unless you have the hub with a mounted rotor, you may have a less expensive replacement. Have not wore one out yet. Needed the replacement because of pad failure. My lack of maintenance. And these do require more maintenance than a car/truck. But these folks at etrailer are great at getting you the correct parts. They shipped an incorrect part to me, caught there mistake before it got to my shop, and had the new one on it way asap. Great service.
by: Lou 02/24/2023
Perfect fit and installation
by: Leosneidy05/26/2023
good product
by: Andrew 10/05/2022
Parts were as ordered and arrived on time. I will be getting all trailer parts in the future with you.
by: Mike S02/24/2015
great products, great service, fast delivery.
I was not sure where to look for these types of parts, but e-trailer has been a super provider of items for the truck, so i looked at them for these parts. they had a good selection, the website helped give confidence in ordering the right part and prices are very fair.
by: Larry 03/11/2023
Needed new parts and these worked as sh ould!
by: Keith 07/07/2022
Excellent turnaround I purchased a rotor for my boat trailer , it was just what I needed and was represented precisely
by: Craig 03/16/2023
Good price and prompt delivery.
by: Scott 03/10/2020
Rotor, bolts, brake pads, and lug nuts all arrived as promised and fit as advertised. Reasonable price with good service means I'll be back.
by: Bob09/07/2019
Just finished, almost finished, installing the new pads, rotors and brake lines. All materials look to be high winds, very happy with them.
The customer service people I worked with were awesome, very knowledgeable and helpful. Love dealing with etrailer.
by: Rogn06/03/2018
On time, reasonable quality. Like any thing used i marine environment they have alimited lifespan. Dacromet helps but is far from answer.
25
75
Show More Reviews
See what our Experts say about this Kodiak Accessories and Parts
- Replacement Rotor for a 2020 Keystone Montana 3121RLIf all you damaged was the rotor then you can just replace it with the Kodiak 13" Rotor item # KR1389D. I didn't get anywhere either with that serial number. However, it looks like your 2020 Keystone Montana 3121RL uses a inner bearing item # 25580 and an outer bearing item # 14125A. The Kodiak 13" Hub and Rotor item # KRH1378D you were looking at is exactly what you need to replace your gouged one if you want to swap out both the hub and rotor. For replacement brake pads you'll want...
view full answer...
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.