Correct 3,500 lb Hub & Drum For Boat Trailer With Bearings L44649 & L68149
Question:
My outer bearing is L44649. I did not completely disassemble everything, because I didn't want to ruin parts before I have the new ones. On the spindle, according to your diagram, I measure the following: D: 1.05" C: 1.37" B: 1.73" The brake flange holes are 2.75" apart.
asked by: Grant
Helpful Expert Reply:
Outstanding information, thanks so much, and what you have, based on those measurements are a spindle for a 3,500 lb axle, with outer bearing L44649 and inner bearing L68149. For that, what you need is the following hub and drum:
- Trailer Hub and Drum Assembly # AKHD-545-35-G-K
This is a galvanized hub for your boat trailer, has a 5 on 4-1/2" wheel bolt pattern, and will allow you to use 3,500 lb brakes. Your brake flange bolt holes are the standard size so you can use the Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies # AKUBRK-35-D.
The only other thing you'd need is the mounting hardware for these brakes, the Mounting Hardware for 10" Brake Assemblies # BRKH10B.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Continue Researching
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKUBRK-35-D Review
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Q&A: Replacement Double-Lip Grease Seal for EZ Lube Hub on 2005 TrailStar Boat Trailer
- Q&A: Compatibility between UFP HD1377 Drum/Hub and AKUBRK-35-D Trailer Brake Assembly
- Search Results: bearing and seal kits
- Search Results: l68110
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Shop: 7" x 1-3/4" Hydraulic Brake Shoe/Lining (One Wheel) - Dexter
- Search Results: ufp
- Search Results: brake pad
- Search Results: brake pads
- Search Results: hydraulic drum brakes
- Q&A: What is the Diameter and Thread Pitch of the Mounting Hardware for 10" Brake Assemblies # BRKH10B?
- Q&A: What Diameter are the Mounting Holes in the TruRyde TRU77FR?
- Q&A: Hub, Drum, and Bearings for 2016 Starcraft AR-ONE 18QB Travel Trailer With 3,500 lb Axle
- Q&A: Brake Flange Bolt Hole Spacing of 3,500 lb Trailer Spindle TRU77FR
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84546UC3 Review
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: etrailer Trailer Brakes AKUBRK-35L-D Review
- Video: etrailer Electric Trailer Brake Kit Installation
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 15 inch
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings