Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug
(367 reviews)
Price: $37.76
In Stock
Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug
Item # T58
Our Price: $37.76
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (367)
- Q & A (0)
- Videos (2)
- Photos
Valterra RV Waste Valves - T58
- Single Waste Valve - Manual
- Straight Valve
- 3 Inch Hub
- Valterra
- Stationary Valve
Twist-on valve is designed to be a quick fix for your RV's black-water waste valve issues. 3" Diameter passage allows wastewater to travel freely when valve is open. Bayonet hooks twist onto existing valve. Lug fitting end connects to hose.
Features:
- Twist-on valve is designed to be a quick fix for your RV's black-water waste valve issues
- 3" Diameter passage allows wastewater to travel freely when valve is open
- Bayonet hooks twist onto existing valve
- Lug fitting end secures to sewer hose
- No clamps needed
- Creates seal
Specs:
- Length with valve open: 12-3/4"
- Length with valve closed: 9-1/2"
T58 Valterra Twist on Waste Valve
Video of Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Black Water Tank Waste Valve Review
Hi everyone. It's Evangeline here at E trailer. And today we'll be taking a look at our Valterra waste valve for your RV black water tank here at E trailer. So this is a three inch gate valve designed for your black water tank. So you can see here how you already have it installed. And this is going to be especially useful.
If let's say you have leaky valves and you need a really quick fix. If you're unable to already fix your valves, or if you just want an extra kind of stop that way, if anything does happen, you're not leaking on the road. So we have this here on a Coleman trailer right now, and you can see with this design, that's more of a safety feature than anything because we have our black water valve here, our gray water valve here, and there's not much pipe before we get to our final valve. So in our case, if anything does happen, this is a great way to make sure that we have a extra kind of stop points before it starts leaking on the road. Great.
When you're driving around and you want to make sure that everything still looks good. So right here is a great reason to get this gate valve. So notice how our black water valve is right over here and how much pipe there is before you get to this output valve. So in our case, and it has happened, the black water valve was leaky. So you do have about two gallons of waste waiting right over here before you attach your hose.
So in that case, this would be very, very useful. So this here is our valve. You'll notice how it has a three inch diameter passage through it, which is going to fit most of your RVs because most of them have that design when it comes to their black water valve. So on one side you have bayonet hooks and that fits right onto your pre-existing valve. And the other side has these fittings, which is where you're going to put your sewer hose.
So right now it's in the closed position and you'll immediately be able to tell, because the handle is all the way down. Now, if you want to open it, or when you already have your sewer hose attached, you just pull up on that lever and you can see how our valve opens. Now, one thing that may happen and I've seen it happen before, is that when they closed this valve on their other valves, they got some toilet paper stuck in there. So that's where this lever comes really in handy, because then you can see if it's fully closed and functioning. The dimensions of this valve is going to be in the closed position, nine and a half inches from top to bottom. And then when you have it open or the levers all the way up, it's going to be 12 and three quarter inches. And with those dimensions is nice that you are able to rotate it if needed, just to get the best fit on your RV. Let's say you have limited clearance up here. You just moved this valve to this size, and that's how you activate it. Where this really shines is that it's a very quick fix. And if it's a quick fix, it needs to be fast and easy. So let's take a look at that install process. We have our waste valve over here, and then we also have our original valve right over here. So we're going to do is first take off the cap. And I like to take off this rubber portion first that way we're free to take this cap off, to just twist that and that's off. So hopefully your gray pink and your black tank valves are already closed and there isn't any residue on the inside, but if they are leaky, there may be some things in there when you take that cap off. So you may want to have a bucket underneath as you do this, but once you get that cap off, you're then going to get your valve and notice how we have this side with the bayonet. That's going to fit right on to your pipe, and then just twist that and lock it into place. And with this portion lock, you can then rotate your valve itself. If you need it to be in a better position, we're going to have it right over there. And once that's in place, you're going to also put this cap right back on. And don't forget to put that rubber attachment back onto that cap. As you can see, this was a very, very quick install process. Now, if you do have leaky valves, it may be a little bit more difficult to just make sure that you have your gloves and you're trying to be as sanitary as possible because as you install that valve pool water may come out. So you want to make sure that you are protected, but once that's on there, then you're good to go. So my personal thoughts about this gate valve is I really like how it's super quick and easy to install it, because if I do have a leaky valve, a little bit of effort to go in there to fix it to a place it this way I can just add that on real quick and fix it later, now if you do have leaky valves, I please try and fix them anyways, We have most of your replacement parts right here at E trailer that will work for you. But if you want something that's a quick and easy fix, this is the way to go. And if you just want an extra safety measure while you're on the road, I highly recommend picking this up anyways. And that was a look here at our Valterra waste valve for your RV black water tank here at E trailer. My name is Evangeline, and I hope you enjoyed the journey..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug - T58
Average Customer Rating: 4.8 out of 5 stars (367 Customer Reviews)
Twist-on valve is designed to be a quick fix for your RV's black-water waste valve issues. 3" Diameter passage allows wastewater to travel freely when valve is open. Bayonet hooks twist onto existing valve. Lug fitting end connects to hose.by: Jimmy05/18/2021
Excellent product. Had to wait awhile but well worth the wait. Been having trouble with black tank valve leaking by. Called and it would be July until our dealer could check it out. This will be a permanent fixture on my Fifth Wheel. Thanks etrailer for getting it to me.
by: Bruce09/04/2022
Even though I have installed this valve I have not tried it. However, I ordered and installed the same product in Nov. 2019. It worked well but in September 2020 somewhere between Custer and Rapid City, SD it came off. It had always been a little loose, so this time I will be watching it much closer and installing something around it if it starts to loosen up.
Bruce
9/5/2023
Its been working great. It was starting to get a little loose, so I secured it with a pop rivet and I I have no problem connecting or disconnetcing the sewer hose to this valve. I like the added protection it provides to my waste water system.
Mike L.
10/24/2023
@Bruce We're glad the waste valve is still doing its job for you!
by: Justin06/20/2022
This is a great add-on because you don't get that little bit of leakage when you pull your sewer cap off. It's also an added level of security knowing I have a backup plan if I have issues with the main valves.
Justin
6/21/2023
I consider this product an essential piece now. Works great and has held up well
by: Toni07/27/2023
Great invention! Makes "dumping" a breeze! Easy to install and operate! No more worries about surprise, I forgot to close the tank valve, again! when I removed the old cap to dump...
by: Anthony 08/08/2022
We’ve had this valve for a year or so. It’s on our second camper. Fit both perfectly and adds a sense of security when draining waste
Anthony
8/9/2023
We’ve been using now for over a year. Thankfully the primary valve hasn’t failed but having the extra level of protection has given us peace of mind. Works flawlessly!
by: David S. 11/05/2016
Easy, cost effective solution to leaky sewer valves. No more 'surprises' when removing valve cap.
David S.
11/15/2017
Item has been in service for a year and still works great! No more surprises when opening sewer valve cap.
by: Ken 02/11/2023
I wanted to try this shut off valve because of the end of sewer line issues that I have had when removing the cap for dumping. I am not the only person to run into these problems when removing the cap. Others have indicated this valve solves the problem so I wanted to give it a try. I’ll find out soon if it works out.
Everything arrived in great shape and in time for my “hurried” needs.
by: Terry 02/21/2024
works great and would buy again.
by: John01/30/2024
Works well, great insurance against leaks or other failures.
by: John03/19/2022
My husband says he is very happy with the Valterra waste valve. He said it functions as promised.
John
3/21/2023
My husband is still very happy with the valve. No poopy leaks!
by: Betty 03/01/2021
Up until winter this year, the valve was great. Then we had a deep freeze & and the valve froze up. Took a bit to warm it up to operate it again. The advantage of this valve, is that you can remove it to clean, lubricate to preform.
Betty
3/3/2022
Just fine
by: Dale 03/07/2024
Good product..fast delivery and good communication...THANKS !!
by: Hank 04/14/2023
The Valterra Waste Valve is an excellent addition to my RV black tank dump pipe. No more water seepage when I remove end cap to connect waste flex line.
by: Doug 08/04/2020
So glad these are back in stock. Everything I've ordered from ETrailer has arrived in good shape and if X is in stock, it arrives very promptly. This little puppy was out of stock everywhere during covid. Thanks supply chain. Grab this AND a spare to CYA. My hero at Changing Lanes said hv a spare, not for malfunction reasons but in case one walks away at a shady campground I suppose. So I spent the $ to have 2. Two is 1, one is none in the ol prepper world.
Doug
8/5/2021
Still working well, some put a small screw in to keep these from twisting off when you remove the sewer connection. I think thats a good idea as mine did twist off when removing mine one trip. was not a big BAD deal as this was after backflush, but I resolved to find a way to prevent that. Still a must have safety item to prevent oopsies. etrailer supportCust service is superior!
by: Richard Bordwell02/21/2017
I have a Lance 1172 camper and I'm having trouble completely closing the valve to the gray water tank. This is just what I need to save me a lot of money in repair costs.
by: Timothy 07/05/2023
When I open the package and I seen the valve in there I cannot believe the quality of the valve. I was very happy because I’ve been needing one of these in a etrailer had it, so I got it.
by: RV Site 2 Sight - Steve03/21/2022
One of the dreaded tasks of RVing is emptying the tanks... particularly the black tank. Before I bought this item, I would hold my sewer hose under the drain outlet, and pull the cap off. Inevitably, sewage would come out before I could connect the hose. After installing the Valterra Waste Valve, I no longer have to worry about that. I simply remove the cap, connect the hose, and pull the valve handle. No worries, no mess. After one year, the product still works without fail. I highly recommend this item!
by: Mark12/17/2023
Works good, no leaks.
by: Scott01/27/2022
Works great. No more surprises when I open the drain valves.
Scott
1/28/2023
Still working perfect. No more spills when empying the trailer tanks.
by: Steve02/08/2021
Very easy to install. Prevents that little bit from spilling when I take the cap off.
by: Todd 06/23/2022
My first upgrade to our camper and the best. This product works great. Can't recommend this enough.
Todd
6/25/2023
This Product is still working great.
by: Michael10/29/2023
Can well package no damage to the shipping box. Installed in minutes. Great backup valve. Would buy again.
by: Christophe03/18/2023
Great product! Strong as it can be, I purchased this part a year ago and with the volume I do in my food trailer, I can tell you that this valve has received a beaten, lol....open and close, open and close, three time a day for a year!!
well not a scratch on it lol.
amazing
by: Eric 01/16/2022
Product works well! An opportunity for improvement would be to make the fitting "stiffer" to avoid the pull gate to stay horizontal to the ground. Otherwise, I am very pleased with the product.
by: Bud 09/14/2022
I installed this on the main outlet on my RV where I connect the drain hose.I first drain the black tank. when it is empty, i leave the tank valve open and close this valve at the hose. I then open the grey water valve and let it flow over into the black water tank until they balance. I then close grey water valve and open the valve at the hose.This is a great way to flush the black tank.And then drain the grey water to flush out the hose.
25
367
Show More Reviews
See what our Experts say about this Valterra RV Waste Valves
- Could Valterra Waste Valve T58 Stop Leak Up Stream from ItSounds like you are asking if you were to install the Valterra Waste Valve part # T58 on the bayonet fittings of your black water valve if it would prevent a leak further upstream from passing through it? If so, yes that would technically work.
view full answer... - Direction of Handle to Open Valterra Waste ValveYou will pull the handle on the Valterra Waste Valve for RV Black Water Tank # T58 "up" or "out" to let the waste water travel down the sewer line. When the handle is "down" or "in" it closes the line. I have attached some pictures for you to reference as well as a review video for you to check out.
view full answer...
- Availability Of RV Waste Valve With 3" Bayonet Hooks And 3" LugsWe have exactly what you are looking for. You will need the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug # T58 which has a 3" bayonet hooks on one end and 3" Lugs on the other. I included a video review of the # T58 for you to take a look at.
view full answer... - Rebuild Kit Bristol 1-1/2 Gate ValveWe have several replacement valve options for RV gray water, 1-1/2" all in black, such as the Bristol Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Hub to Spigot Item # 34466N11AB or the # 34466N11AB72GMA with a 72" cable. So although do not have a rebuild kit for a Bristol valve in white we do have replacement options. There is also a number of very cost effect replacements in the option of double valves, please note the attached link.
view full answer... - Can a Bristol Waste Valve Be Used in Place of a Valterra Waste Valve?Yes, Bristol is a manufacture not a specific type of fitting. As long as the opening diameter and fitting type is the same then you can use one with the other. The Valterra Waste Valve item # T58 you were looking at is a straight pull manual valve that uses 3" diameter bayonet hook fittings. I have linked a review video below.
view full answer... - Availability of Replacement Seals for Valterra RV Waste ValvesThe correct replacement for a 2 inch valve is Valterra RV Waste Valve Seals - 2" # T1002-7VP, and the correct replacement for a 3 inch valve is Replacement Seals and Hardware for 3" Valterra Waste Valves # T1003-7VP.
view full answer... - Can Valterra Waste Valve be Mounted in Side Position?If you want to install the Valterra Waste Valve # T58 in the side position it will absolutely acceptable, yes. In fact, the accompanying photo shows it installed in the same way as you are asking about. I've also added a link to a video review of this product for you to take a look at.
view full answer...
- Are There Installation Differences Between LaSalle Bristol, Valterra, And Camco Wastewater ValvesNo they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part # 34466N4BB96GM, needs ABS solvent cement, part # 3447530889, to secure the valve to your sewer pipe. Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug, part # T50, also uses ABS solvent cement, part # A05-0303, but Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug, part # T58, is...
view full answer... - Dimensions of EZ Coupler RV Waste Valve Cap F02-3106BK for Black Water ValveThe EZ Coupler RV Waste Valve Cap # F02-3106BK fits all standard 3-inch bayonet RV black water waste valves such as part # T58. Gray Water valves like # T1001D are 1-1/2-inches in diameter. Cap # F02-3106BK also has a 3/4-inch connector and cap. Please see the linked video for details on this item. For reference I linked our main page for RV plumbing items including both black and gray water hoses, adapters and fittings.
view full answer... - Recommend 5th Wheel Rails for a 2022 Dodge Ram 1500Yes, we do have a set of 5th wheel rails for your 2022 Ram 1500. You will want the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails item # RP56018-53. This rail kit fits the 5-1/2' and 6-1/2' bed models. These rails are also compatible with the EcoDiesel Ram 1500's or standard gas. I have linked a review video below. To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long item # C56000...
view full answer... - What Adhesive Is Used For Valterra RV Waste ValvesThe waste valve you came from, part # T58 is not a valve that uses glue because it is designed to attach to the RV side and the waste tube with the bayonet adapters on each side of the valve. We do have waste valves that do require gluing. I have attached a link to the waste valves we offer. You can use the filter on the page to find the correct size you need. We do offer part # T50. This has a cap with a bayonet fitting that you attach your drain hose to. The other side of the valve is...
view full answer... - Can a Valterra Waste Valve Be Used in Place of a Bristol Waste ValveYes, Bristol is just the manufacture of the product. As long as the opening diameter and fitting type is the same then you can absolutely use one in place of the other. Unfortunately, we do not carry Bristol products but I have attached our waste valve selection for you. You can use the facets on the left hand size to narrow down your searches (electric/manual, single/double, gray water/black water i.e.) For example, the Valterra Waste Valve part # T58 is a straight pull manual valve that...
view full answer... - T-58 Waste Valve With Bayonet ConnectionThe Valterra Waste Valve for RV Black Water Tank , # T58 has a bayonet style connection. It will lock in to place from the four bayonet connections on one end and 3" Lugs on the other. Please see the attached image. If you are looking for something that accepts standard 3" plumbing pipe, the Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug, # T50 is available. This requires an ABS solvent for installation. Please note the attached product review video.
view full answer...
- Could Valterra Waste Valve for RV Black Water Tank Fit 2005 Newmar Kountry Star 3720If the pipe on your 2005 Newmar Kountry Star 3720 has the standard 3 lug fitting that a bayonet fitting normally attaches to yes the Valterra Waste Valve for RV Black Water Tank - Twist On # T58 would fit and work great. We don't have a way to look up what your RV has though. And also this is a commonly changed item so there's no way to know if yours was changed as well.
view full answer... - Replacement RV Black Water Waste Valve for 3-Inch Sewer PipeIt sounds like you're looking a for a new valve assembly for your black water tank. For a black water waste valve for a standard 3-inch diameter twist-on bayonet/lug fitting you can use Valterra part # T58. If your RV instead has a straight sewer pipe you can use the slide-on Valterra valve # T50. This item must be glued on using Valterra ABS cement # A05-0303.
view full answer... - T58 Valterra Waste Valve at the End of Stock Waste Valve PipeYou can install part # T58 at the end of the pipe with the stock valve open all the time. Installing this is going to make life a lot easier and you won't have to crawl under your camper. I do recommend part # A05-0303 as well. The cement is going to ensure a tight water seal all the time.
view full answer... - Replacement Waste Valve for RV Black Water Tank I suggest replacing with the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug Item # T58. We offer this as a complete replacement assembly.
view full answer... - Is My RV Black Water Pipe a Standard DiameterYour thinking is 100% correct here. RV black water drains will be a standard 3" size, which is the internal diameter of the pipes, so the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug # T58 will work on your black water tank pipes.
view full answer... - What is the Overall Depth of the Valterra Twist on Waste Valve T58I went out to the warehouse to measure the overall depth of the Valterra Twist-On Waster Valve, # T58, for you. It has an overall depth of 5-1/16 inches. I have included a picture showing this for you.
view full answer...
- Parts Needed to Add Grey Water Tank to Enclosed TrailerThe specific fittings and valves you need will ultimately depend on the kind of grey water tank that you plan on adding to your enclosed trailer. If there are threaded fittings or specific diameter openings on your tank, you will need to find the compatible fittings. For a waste valve you can use something like the Valterra Twist on Waste Valve # T58. This will not be glued on because it is designed to attach to the RV side and the waste tube with bayonet adapters like the Valterra #...
view full answer...
Do you have a question about this RV Waste Valve?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Evangeline M
Written by:
Amy B
Updated by:
Wilson B
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jimmy
5/19/2022
Still doing great!