Valterra RV Waste Valve - Sanitation Tee - Rotating - 3" Spigot x 1-1/2" Hub x 3" Lug

Video Transcript for Valterra RV Sewer - Waste Valves - T11A Review

Today we're going to take a look at the Valterra Sanitation T with the Rotating Valve, has a three inch spigot with the bayonet cap and a one and a half inch hub. Now once this unit's added to your RV sewer system, it's going to combine your black water and gray water drainage tubes to one outlet. Made from a durable black plastic construction. The T has a one blade X valve right here. It's got a nice T handle on it, that you can pull it open. It's going to give you a nice easy grip design, allows for easy opening and closing of the gate in the inside there.

Also on the inside it comes with the built in seals to give you a leak proof performance. Also want to mention that the valve will rotate for easy accessibility, so instead of this way, if you want it to unloosen it, you can rotate it whichever position you need it to. Now it is going to come with this bayonet cap right here, on the main drain tube, that's so you got a seal in there as well as leakproof performance. This is going to be your standard bayonet style fitting, you can see on the cap, you can release it. It's a four prong design cap. Now the cap's going to have four hooks on it, it's going to be tethered, you can see here so that you won't have to worry about losing it.

And then when you need to put it on there, you just close it up like that. It does, this connection point here will accept a standard three inch bayonet style fitting. I do want to give you a few measurements on this. The hub for the black water tank to, it's going to have an inner diameter of three inches. Overall outer diameter is going to be three and a half inches.

And then the small hub right down here, it's for the gray water tank tube, it's going to have an inner diameter of about one and seven-eights inches and a total outer diameter of two and a quarter inches. But that should do it for the review on the Valterra Sanitation T with the Rotating Valve, the three inch spigot with bayonet cap and a one and a half inch hub.