bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve - Manual
  4. 1-1/2 Inch Valve Body
  5. Straight Valve
  6. Stationary Valve
Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub

Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub

Item # T1001NH
Our Price: $17.64
RV Waste Valves
Shipping Weight: 0.52 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Hub slides onto sewer pipe. 1-1/2" Spigot slides into sewer pipe. Handle sold separately. Great Prices for the best rv waste valves from Valterra. Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub part number T1001NH can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (8)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valves - T1001NH

  • Single Waste Valve - Manual
  • 1-1/2 Inch Valve Body
  • Straight Valve
  • Valterra
  • Stationary Valve

Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Hub slides onto sewer pipe. 1-1/2" Spigot slides into sewer pipe. Handle sold separately.


Features:

  • Replacement valve for your RV's gray-water tank
  • 1-1/2" Diameter passage allows wastewater to travel freely when valve is open
  • 1-1/2" Hub slides onto sewer pipe
  • 1-1/2" Spigot slides into sewer pipe
  • ABS solvent cement (sold separately) required for installation
  • Handle sold separately


Specs:

  • Length with valve open: 8-1/2"
  • Length with valve closed: 6-1/4"
  • 1-Year warranty


T1001NH Valterra Motorhome Grey Water Holding Tank Waste Valve - 1-1/2" - Spigot x Hub





Video of Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Valterra RV Sewer - Waste Valves - T1001NH Review

Today we're going to be taking a look at the Valterra spigot and hub RV waste valve. This is an inch and a half waste valve. It's designed for inch and a half plumbing systems. It's going to allow you to add replace, repair, or upgrade to a new valve. It's going to feature internal seals that's going to provide leak proof performance. It's got this stainless steel shaft on the unit.

It's very strong and durable as well as corrosion resistant. This unit does not come with a handle. Handles are sold separately. To check out some options you can look at what we have here at etrailer.com, we do offer some handles that would go with this unit. The handle would simply thread onto the shaft. A few measurements I want to go over with you real quick.

The length of the unit, with it in a closed position, measuring from edge to edge, measuring to the top of the shaft right here it's going to be about six and a quarter inches. If you extend that out, take another measurement, we're looking at about, eight and half inches long. Really nice easy to use design. Again, the internal seals are going to offer leak proof performance. We have the smaller end right here.

If we take an outer diameter measurement of that, that's going to give us a measurement, outer diameter on the small side, that looks to be right around 1 and seven-eighths of an inch. Inner diameter, is going to measure one and nine-sixteenths of an inch. On the large end, outer diameter is two and three-eighths, inner diameter is one and seven-eighths. That's going to do it for today's look at the Valterra spigot and hub RV waste valve.

Customer Satisfaction Score:


Customer Reviews

Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub - T1001NH

Average Customer Rating:  4.9 out of 5 stars   (8 Customer Reviews)

Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Hub slides onto sewer pipe. 1-1/2" Spigot slides into sewer pipe. Handle sold separately.

by:

Great transaction, Fast shipping.

Daniel S.

10/16/2022

Product working as it should. Thank You



by:

Works as advertised.



by:



by:



by:

Look good work good



by:



by:



by:


8
8

See what our Experts say about this Valterra RV Waste Valves

  • Determining if Gray Waste Valve for RV is Slip on or Thread In
    You'll have to look at the way the pipe connects to your RV plumbing to determine if the valve slips over the piping or into it or if it screws in. It should be obvious under closer inspection. We have screw in options like the part # T1001D for 1-1/2 inch. Either way though most likely it will be plastic welded so it would need to be cut off since that can't be undone. When you go to replace you'd need the solvent # A05-0303.
    view full answer...
  • Can Old Cable be Used for 1-1/2" Waste Valve System
    Potentially - it just depends on how your current valve is connected to the cable as well as what brand waste valve you have. For example, the Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub # T1001NH has a connection that screws into place while the Valterra Waste Valve Body # TC172 has a different connection to the cable and it's a replacement for a Valterra waste valve system. Let me know what you have and I'll be happy to see if we have the correct replacement...
    view full answer...
  • Replacement 1-1/2" and 3" Valterra Bladex RV Waste Valves With Threaded Shafts
    Yes, if you were to remove the hub and spigot from the Valterra Bladex Waste Valve # T40NH you would be left with a Valterra Bladex Waste Valve Body # T1003DSPB with the threaded shaft rather than a drilled shaft. A better option may be to use the Valterra Bladex Waste Valve Body # T1003VP and just remove the handle that is threaded on. That will take care of the 3" valve you are needing. We have the 1-1/2" valve with the spigot and hub # T1001NH or like the other option I recommended...
    view full answer...

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Mary K
Updated by:
Mary K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.